Circular Image

L.C. Rietveld

info

Please Note

54 records found

The increasing contamination of surface water and groundwater with organic micropollutants (OMPs) poses serious environmental and public health risks. These OMPs, originating from municipal and industrial wastewater streams, include pharmaceuticals, pesticides, personal care products and industrial chemicals. Although typically present in concentrations ranging from ng L-1 to few μg L-1, they are persistent, bioactive and can lead to antibiotic resistance, endocrine disruption and even carcinogenic effects. Current wastewater treatment technologies are ineffective towards the complete removal of most OMPs present in the wastewater. Therefore, additional treatment steps are essential.

Among advanced treatment methods, photoelectrocatalytic based advanced oxidation processes (PEC-AOPs) have attracted increasing interest due to their ability to generate reactive oxygen species (ROS), such as hydroxyl radicals (•OH) and superoxide radicals (•O₂⁻). These ROS can degrade OMPs into less harmful products or mineralizing them entirely. Bismuth vanadate (BiVO4) has emerged as a visible-light-responsive photocatalyst for PECAOPs due to its narrow band gap (~2.4 eV) and photostability. However, its practical application is limited by fast charge recombination and limited scalability in real wastewater. Most studies are limited to a single pollutant at high concentrations (1–10 mg L-1) in demineralized or ultra-pure water, with limited attention to real-world scenarios involving mixtures of OMPs at concentrations below 1 mg L-1. Moreover, few studies address scalability using process level simulations. Knowledge gaps thus include understanding the simultaneous removal of multiple OMPs at concentrations below 1 mg L-1 and integrating lab-scale reaction insights into conceptual reactor models using realistic operational variables.

This dissertation presents a comprehensive study on BiVO4 based photoanodes for the photoelectrocatalytic removal of OMPs, with the objective of effectively removing single and multiple OMPs from demineralized water at concentrations below 1 mg L-1. To achieve this objective, pristine BiVO₄ was first investigated as a baseline visible-light-responsive photoanode. Subsequently, two heterojunction strategies were investigated to overcome the intrinsic charge-carrier recombination limitation of BiVO₄. BiVO₄/BiOI was selected to enhance charge separation and extend visible-light absorption, whereas TiO₂-GO was coupled with BiVO₄ to further improve charge separation and interfacial properties. In the TiO₂-GO layer, graphene oxide (GO) was incorporated because of its ability to promote charge separation and provide a high specific surface area for adsorption of OMP molecules. In addition, the study explored reactor scale-up using computational fluid dynamics (CFD). Pristine BiVO4 photoanodes using a simple dip-coating method on fluorine-doped tin oxide (FTO) substrates have been fabricated, followed by thermal annealing at 460°C for 2 h. These photoanodes were structurally and opto-electronically characterized and subsequently tested for the simultaneous removal of three environmentally relevant OMPs - acetaminophen, benzotriazole and propranolol - each at 45 μg L-1 in demineralized water. When operated at an applied voltage of 1 V (vs Ag/AgCl) under simulated solar irradiation, the photoanode achieved removal efficiency of 99% for both acetaminophen and propranolol and 70% for benzotriazole within 2 h. The degradation followed first-order kinetics, with rate coefficients of 2.84 × 10⁻², 2.44 × 10⁻², and 9.35 × 10⁻³ min⁻¹ for acetaminophen, propranolol, and benzotriazole, respectively, demonstrating substantially slower degradation of benzotriazole. Quenching experiments indicated that •OH was the dominant reactive species…
...

What is a feasible sludge management strategy for Criterion Water Treatment Plant considering local constraints, technical feasibility, economic viability and environmental impact?

Criterion Water Treatment Plant supplies drinking water to Bulawayo, Zimbabwe, using aluminium sulphate as its primary coagulant. The resulting coagulation flocculation (CF) sludge is discharged to sludge ponds and sludge fields without further treatment, a practice that concentrates aluminium in the surrounding soil. This presents a risk to the local environment and has been identified as a concern by both Bulawayo City Council (BCC) and the African Development Bank. This thesis asks what constitutes a feasible sludge management strategy for Criterion, considering local constraints, technical feasibility, economic viability and environmental impact.
The question was addressed in four steps: a literature review of water treatment sludge characteristics, environmental and health impacts, regulation and management strategies; a characterisation of Criterion's sludge combining BCC historical monitoring data with samples analysed at the TU Delft WaterLab; a multi-criteria analysis developed in a workshop with BCC staff; and a techno-economic business case for the highest-ranked option.
Characterisation showed a strongly aluminium dominant sludge, with almost all of the dosed aluminium retained in the clarifiers sludge, supporting further assessment of coagulant recovery (CR). The MCA assessed seven strategies and produced a leading cluster separated by only twelve points: CR via the REAL process (354), sewage sludge dewatering (344) and use as a constructed wetland substrate (342). The CR REAL process was developed into a conceptual design of three identical trains on a 105,000 m³/d design basis, comprising a process flow diagram, stream tables, a mass-balance model, equipment sizing, site selection and an AACE Class 5 cost estimate.
The model recovers approximately 82.3% of the incoming aluminium as potassium aluminium sulphate, but returns an installed CAPEX of approximately $5.81 million, a gross annual OPEX of approximately $15.47 million and a net present value of approximately −$135.83 million over a twenty year life. Ultrafiltration feed heating accounts for 63% of operating cost, because Criterions feed is roughly 141 times more dilute in aluminium than the pilot feed on which the process was validated. Thickening the sludge upstream reduces gross OPEX by approximately 97% and the NPV shortfall to approximately −$4.24 million.
The thesis concludes that no strategy is ready for immediate full-scale implementation. It instead supports a staged pathway of year-round sludge monitoring, a broadened MCA and proportionate feasibility studies of the three leading options, with a Criterion-specific REAL pilot incorporating upstream thickening as the priority technical investigation.
...

Implications for Nanoplastic Removal during Riverbank Filtration

Nanoplastics (NPs) are emerging colloidal contaminants whose environmental fate and associated risks are governed by aggregation in the aqueous phase and deposition within porous media, particularly during riverbank filtration (RBF), a widely applied natural treatment process for drinking water production. NPs undergo natural weathering processes including UV-induced weathering and eco-corona formation due to natural organic matter (NOM) adsorption. Porous media, such as sand grains, likewise experience natural weathering such as the development of spatially heterogeneous biofilms. In this thesis these weathering processes were assessed on the regulation of NP aggregation and transport in RBF-relevant systems. Our findings revealed that UV weathering modifies eco-corona structure and thereby alters NOM effects on NP aggregation. Using Suwannee River NOM as a model, NOM stabilized non-weathered NPs through steric repulsion, whereas it destabilized UV-weathered NPs via polymer bridging. In both cases, the magnitude of NOM effects increased with NOM concentration and molecular weight. Transport experiments in saturated porous media revealed a previously overlooked two-stage transport behavior governed by intrinsic sand surface heterogeneity. An initial stage was dominated by favorable attachment, leading to strong retention and delayed breakthrough, followed by a later stage characterized by unfavorable attachment. Both UV weathering and NOM coating reduced NP deposition in both stages, thereby masking the influence of surface heterogeneity. Furthermore, naturally developed biofilms on sand grains enhanced both favorable and unfavorable NP attachment. Eco-corona formation on NPs in river water suppresses initial favorable deposition while enhancing unfavorable deposition, resulting in enhanced long-term NP retention during RBF. Overall, this work demonstrated that natural weathering of both NPs and porous media exerts a decisive control on NP mobility in RBF systems, underscoring the necessity of incorporating environmentally aged particles and media into experimental designs for realistic risk assessment. ...
Doctoral thesis (2026) - L. Li, S.G.J. Heijman, L.C. Rietveld
Ceramic nanofiltration (NF) membranes are emerging as a reliable solution for advanced wastewater treatment, owing to their robustness, high chemical and thermal resistance, and high fouling resistance compared to the polymeric alternatives. These membranes, typically composed of metal oxides such as titania (TiO₂) and alumina (Al₂O₃), therefore offer advantages in rejecting organic compounds, oil, and colloidal particles..... ...

Sensor Data Fusion using Machine Learning

Doctoral thesis (2026) - C.L. Wu, L.C. Rietveld, B.M. van Breukelen, R.M. Wagterveld
Oil remains the largest contributor to global energy consumption, powering vehicles, heating homes, and fueling the economy. This dependence on oil has led to widespread groundwater contamination, primarily through the release of light non-aqueous phase liquid (LNAPL). These contaminants typically enter the subsurface from leaking underground storage tanks, pipelines, and refineries. Once in the subsurface, LNAPLs migrate through soil and form an immiscible layer that floats on the water table. The formed layer acts as a persistent source of dissolved petroleum hydrocarbons (PHCs) and creates contaminant plumes that last for decades.

PHC compounds are highly toxic and carcinogenic, posing risks to human health and the environment upon exposure. Although groundwater serves as a major drinking water source, drinking water wells are monitored only quarterly or yearly for PHC contamination. Conventional monitoring relies on time-consuming manual sampling and costly laboratory analysis. Sensors exist for directly detecting and measuring PHC levels in the field, but most of these sensors remain experimental and/or expensive.

Microbial communities in aquifers can degrade and thereby attenuate PHCs, making monitored natural attenuation a preferred long-term management strategy for PHC contaminated sites. This is especially the case when active remediation (e.g., pump-and-treat or excavation) is technically challenging or costly. However, there is still a gap for cost-effective tools for real-time, continuous groundwater monitoring for PHC contamination... ...

Integration of Catalytic Modification and Advanced Oxidation Processes

Doctoral thesis (2026) - S. Zhang, S.G.J. Heijman, L.C. Rietveld
Membranes are widely recognized as promising technologies for addressing the growing demand for freshwater driven by rapid population growth and industrialization. Ceramic membranes, in particular, offer advantages such as high mechanical strength, chemical resistance, and long lifespan compared to polymeric membranes. However, permeability loss during filtration is one of the challenges. The specific contributions of concentration polarization (CP) and fouling to this decline remain insufficiently understood. Fouling is a major obstacle in ceramic membrane operation, and the removal of organic micropollutants (OMPs)—increasingly detected in different water bodies—poses an additional challenge due to the relatively large pore sizes of ceramic membranes, being mostly in the range of microfiltration and ultrafiltration (UF). To address these challenges, various modification strategies have been developed to improve membrane performance in water treatment. One promising approach is to modify ceramic membranes with catalysts, enabling them to perform both separation and catalytic functions. However, currently, developed catalytic ceramic membranes often suffer from severe flux decline after deposition, especially when coated with a dense or thick coating. In addition, catalytic membranes coupled with advanced oxidation processes (AOPs) have typically been achieved by large dosages of oxidating agenting during filtration. The excessive loading of catalysts and the overdosage of chemicals not only increase operational costs but also limit the practical application of catalytic ceramic membranes.
This thesis aims to enhance the performance of ceramic membranes for water treatment, focusing on the challenges of both fouling and OMPs’ removal. First a method was proposed to determine the main reason for flux decline, suggesting that both CP and fouling had impact on flux decline. Then catalytic ceramic ultrafiltration membranes, modified with CuFe2O4 and palladium, were employed to be coupled with H2O2 and peroxymonosulfate (PMS) based AOPs, respectively. The catalytic ceramic membranes not only exhibited a high flux after coating but were also effective in fouling removal and OMPs degradation.
High flux loss in membrane filtration can result from both CP and fouling, and a high CP level may further exacerbate fouling. However, the traditional CP model is unable to qualify their individual contributions. To better understand flux decline, a practical strategy was developed to distinguish the effects of CP and fouling by measuring pure water flux before and after the filtration of nano-sized colloids by ceramic nanofiltration (NF) membrane. The results indicated that colloidal CP could account for 43% to 95% of the total flux decline, with the remainder attributed to fouling. The CP values, calculated by a modified model, showed that the colloidal CP was in the range of 7-460, which is considerably higher than the CP (typically 1-2) caused by ions in spiral-wound reverse osmosis or NF. The highest CP level, i.e., 460, was observed for larger silica colloids, likely due to their slower diffusion. Although an increased crossflow was found to mitigate CP, high CP levels, i.e., values of around 250, were still observed.
To address membrane fouling, CuFe2O4-coated ceramic UF membranes were fabricated. The catalytic membranes with a minor flux loss after coating were then combined with Fenton-like backwash to enhance fouling removal. A low cleaning efficacy (1%–14%) was found in conventional hydraulic backwash. In contrast, due to the strong radicals induced by H2O2-based AOPs, the cleaning efficacy for removing alginate fouling from the catalytic membranes was improved to approximately 70% over multiple cycles. The backwash pressure or flux, rather than duration, was found to govern the AOP-enhanced cleaning performance. This is attributed to the increased residence time of H2O2 at low backwash pressure or flux. The presence of calcium (Ca) can form the rigid alginate-Ca clusters, not only negatively influencing the flux but also limiting the transport of radicals to the internal structure to break down the fouling. Besides, the fragments of alginate can reattach to the membrane surface by binding with excess Ca, thus reducing Fenton-like backwash efficacy. During seven-cycle filtration of concentrated alginate feedwater, the catalytic membranes restored 83%-94% flux after Fenton-like backwash. The leaching of catalysts gradually ceased over time, with negligible leaching in NaClO or NaOH.
Building upon this success, the catalytic ceramic membranes were further explored with a low loading of catalyst. Therefore, atomic layer deposition (ALD) was used to achieve a precise and low loading of Pd, ensuring minimal impact on membrane flux. The catalytic membranes modified with 30 ALD cycles were coupled with PMS for in-situ AOP degradation of OMPs during filtration. The coupled system achieved nearly 100% OMP removal at flux below 100 L/(m2·h) and maintained a high degradation efficacy (76% to 96%) even at a higher flux of 200 L/(m2·h). The OMPs’ degradation was enhanced by Pd deposited within the membrane pores, improving degradation kinetics by up to three orders of magnitude due to nanoconfinement effects, compared to the effect of Pd deposited on the membrane surface. The contribution of different reactive species (RS) to OMPs degradation was found to depend on the compound. Although ions and natural organic matter had minimal impact, harsh feedwater conditions, such as high salinity of brine water and pH at 2.5 or 11, reduced the degradation of certain OMPs, likely due to inhibited PMS activation.
Although the AOPs-enhanced removal of fouling and OMPs have widely been studied, little is known about the effect of fouling on OMPs’ degradation. Therefore, Pd-deposited ceramic ultrafiltration membranes with PMS were used to treat feedwater containing alginate and OMPs. The results showed that the Pd-coated membranes effectively mitigated fouling and achieved a high degradation efficacy of OMPs, even under severe cake fouling or pore blocking. Fouling was found to influence permeability and changed fouling mechanisms (cake fouling and pore blocking) depending on the PMS concentration, flux, foulant type, and Ca concentration, but its effect on OMP degradation was minimal. This is attributed to the synergy between membrane separation of foulants and nanoconfinement, which prevents the deactivation of catalytic sites and enriches RS and OMPs within the membrane pores. Although the governed RS for OMPs degradation almost remained consistent under fouling and non-fouling conditions, fouling altered their relative contributions to OMP degradation. However, different fouling is likely to alter the dominant oxidation pathway during OMP degradation. ...
EngD thesis (2026) - A.A. Alexandraki, L.C. Rietveld, G. Kyritsakas, Alex van der Helm
Drinking-water utilities increasingly rely on measured data, predictive models, and digital advisory tools to respond proactively to changing source-water quality and treatment conditions. The engineering challenge is not only to generate predictions, but also to integrate heterogeneous information sources in a way that preserves their meaning, provenance, status, and professional responsibility.

Within the Horizon Europe ToDrinQ project, an interoperable decision-support platform for drinking-water treatment was developed and evaluated using Waternet, the public water utility serving Amsterdam and its surrounding area, as the demonstration case. The scope covered source-water awareness at Nieuwegein and the coagulation–flocculation and ozonation processes associated with the Leiduin treatment system.

Twenty platform requirements were consolidated into four design principles: separation of platform functions, defined interfaces for interoperability, human-in-the-loop decision support, and separation of data acquisition from model execution. The platform integrated measured information, predictive soft sensors, advisory services, operational risk interpretation, and external information exchange. Implemented services addressed source-water turbidity, coagulation performance, ferric-chloride dosing, ozone exposure, bromate formation, and microbial-removal performance.

The platform was evaluated through software verification, communication with Waternet’s Process Information Management System, external interoperability testing, stakeholder review, and requirement verification. Information exchange with the NESSIE partner platform demonstrated that values could be transferred while retaining their units, timestamps, provenance, and service identity. Stakeholder feedback further refined the operator-facing workflow. Measurements, predictions, recommendations, and unavailable information remained distinguishable, while selected predictions were translated into Low, Moderate, High, or Unknown operational states. Invalid or unavailable information resulted in an Unknown state rather than being interpreted as safe, and final operational decisions remained with the responsible professionals.

A reliability-centred method was also developed to manage soft sensors and related software services as digital assets. Application to the ozonation concentration–time soft sensor showed that incomplete or unavailable input information and model drift were key reliability concerns. The results highlighted that digital reliability depends not only on model execution, but also on input validity, visibility of degraded conditions, and lifecycle monitoring.

A techno-economic evaluation compared Business-as-Usual with platform-supported operation. For Waternet continuation, the base case resulted in an estimated seven-year Net Present Value of approximately €7,161. For another utility adopting the existing platform, the base-case NPV was approximately −€42,839, while the optimistic case increased to approximately €132,379 with a payback period below two years. Development of an equivalent platform from scratch remained financially negative in the evaluated cases.

Overall, the research demonstrates how measured, predictive, advisory, risk, reliability, and interoperability services can be integrated within a reusable decision-support environment while maintaining human responsibility for drinking-water treatment decisions.
...
Africa is the world’s second driest continent, supporting 15% of the global population with only 9% of the global renewable water resource. The 2015 to 2018 drought in the Western Cape of South Africa, where a Day-Zero scenario was narrowly avoided, highlighted the need to start looking at alternative water resources in conjunction with preserving the current water resources.

Globally, the water sector is moving towards a circular water economy - where all water sources, including wastewater, stormwater and rainwater are treated as a resource that can be used, recycled, and replenished into the system. Stormwater harvesting (SWH) has successfully been implemented in countries such as Australia, Israel, Singapore & South Africa.

The success of any SWH scheme depends on effective site selection. Yet, there is little guidance available, and site choices have traditionally relied on the subjective judgment of urban water managers. This demonstrates the need for an objective, data-driven approach that integrates multiple spatial datasets to identify optimal SWH locations.

This research develops such a method: an integrated hydrological and GIS-based screening tool that identifies high yield (hotspot) SWH sites using publicly available datasets in Africa. The collection models showed that high yielding stormwater harvesting sites can be identified with publicly available data, with all 4 weightings consistently pointing out the top 8 stormwater harvesting sites.

The storage and distribution models showed that with a storage facility that has a capacity of 10x the maximum daily demand, high reliability figures can be achieved in excess of 80% in terms of volume and time-based reliability. The storage and distribution models also showed that if the storage capacity can be increased, the reliability and resilience of the facility can also be increased.

The study also has some limitations and intrinsic uncertainties, and the framework should be used as a screening tool.

This study places focus on stormwater harvesting as an integral part of sustainable management of urban water and presents a robust, adaptable and scalable tool that can support urban areas across Africa to address the growing water demand challenges.

...
Master thesis (2025) - H. Long, L.C. Rietveld, G. Kyritsakas, R.W. Hut
Access to clean and safe drinking water is essential for public health and sustainable development. Drinking water treatment plants (DWTPs) ensure water quality, but fluctuating raw water characteristics, particularly turbidity, challenge efficient coagulation and dosing control. Traditional strategies like jar tests and feed-backward control are limited by delayed results, making timely adjustments difficult. Short-term predictive tools based on machine learning (ML) offer a solution by forecasting water quality variations and enabling proactive control. This study develops several different ML models for short-term turbidity prediction at the Lekkanaal DWTP, addressing three questions: (1) which parameters influence turbidity, (2) which feature combinations yield optimal predictions, and (3) how far in advance turbidity can be reliably forecasted.

Historical water quality and hydrological data were collected from Waternet, KNMI, and Rijkswaterstaat, followed by preprocessing for reliable inputs. Candidate features were selected using Spearman correlation and Self-Organizing Maps (SOMs). Three regression models—AutoRegressive Integrated Moving Average (ARIMA), Random Forest (RF), and Long Short-Term Memory (LSTM)—were trained for different horizons, and feature importance analyzed using greedy selection and visualization tools. An RF classifier evaluated the feasibility of predicting peak turbidity events.

Results showed turbidity was driven by hydrological and physicochemical factors. Upstream discharge and turbidity strongly correlated with local measurements, highlighting the Lek River as a primary contributor, while EC and temperature showed negative correlations, reflecting dilution and seasonal sediment mobilization. SOMs confirmed high turbidity coincides with northward flows from the Lek River into the Amsterdam-Rhine Canal.

Feature analysis indicated univariate models using recent sensor\_turbidity outperformed multivariate models; additional features introduced noise. The last three hours of turbidity dominated predictions across ARIMA, RF, and LSTM.

All models provided reliable short-term forecasts, with RF outperforming ARIMA and LSTM for 3- and 6-hour horizons. Extreme peaks were systematically underestimated, and RF classification detected fewer than 16\% of peak events. Short-term forecasts up to six hours are feasible, but high-magnitude events remain challenging, emphasizing the need for enhanced monitoring and tailored strategies. ...

Photoelectrocatalytic Degradation of Pharmaceuticals Using QAC-Modified BiVO₄ Photoanodes in Secondary wastewater Effluent

Pharmaceuticals in wastewater are an urgent environmental concern. Many emerging technologies, such as advanced oxidation processes (AOPs), are being explored for their removal. One promising AOP is Photoelectrocatalysis (PEC), which combines photocatalysis with electrochemistry to enhance pollutant degradation by suppressing electron-hole recombination. Bismuth vanadate (BiVO₄) is a promising visible-light-responsive photoanode material due to its narrow bandgap and chemical stability. However, its overall performance is limited by poor charge mobility and rapid recombination of photogenerated electrons and holes. To overcome these limitations, surface modification strategies have been applied, including the use of surfactants to alter and enhance its surface properties. Quaternary ammonium compounds (QACs), widely used for their surfactant properties and structural flexibility, have shown potential in enhancing the photoelectrocatalytic performance of BiVO₄. This study evaluated the effect of six commonly used QACs on BiVO₄ photoanodes. The modified photoanodes were synthesized and comprehensively characterized using several techniques: X-ray Diffraction (XRD) to determine crystal structure, Scanning Electron Microscopy (SEM) to examine surface morphology, Energy Dispersive X-ray Spectroscopy (EDX) for elemental composition, X-ray Photoelectron Spectroscopy (XPS) to analyze surface chemical states, Ultraviolet-Visible (UV-Vis) spectroscopy to assess optical absorption, and Linear Sweep Voltammetry (LSV) to evaluate electrochemical behaviour.
Photoelectrocatalytic degradation experiments were performed using real secondary treated effluent collected from the Horstermeer Wastewater Treatment Plant (WWTP), which was spiked with 20 pharmaceutical compounds. The QAC-modified BiVO₄ photoanodes were tested under simulated solar irradiation. Characterization results confirmed that the monoclinic phase of BiVO₄ was preserved after QAC modification, with minor shifts indicating changes in surface properties. SEM images showed that the structural integrity of BiVO₄ was maintained, while EDX and XPS results revealed an increase in oxygen vacancies, suggesting improved charge transport characteristics. LSV confirmed that photocurrent generation occurred only under illumination, as expected in PEC systems. Among the modified electrodes, the BiVO₄ photoanode modified with DADMAC C18 exhibited the highest pharmaceutical degradation efficiency over a 120-minute PEC run, outperforming even the unmodified BiVO₄ electrode. The ATMAC C18 variant demonstrated rapid initial degradation within the first 15 minutes, while the BAC C18 variant showed relatively poor performance. Kinetic analysis indicated that sulfamethoxazole was the most persistent compound in the pharmaceutical mixture, with the longest half-life. To assess real-world application potential, full-scale PEC reactor designs were reviewed. A circular reactor configuration with annular electrodes was identified as the most suitable due to its balanced light distribution, effective photoelectrocatalytic surface area, and ease of operation. A conceptual full-scale design was proposed to replace the existing UV oxidation system at WWTP Horstermeer, targeting a treatment capacity of 25,000 cubic meters per day. Based on preliminary calculations, the estimated treatment cost was €0.24 per cubic meter, highlighting the potential economic feasibility of implementing PEC technology in municipal wastewater treatment.

...

Machine Learning for New Design Paradigms

This thesis presents a comprehensive investigation into the optimization of Slow Sand Filter (SSF) performance through data driven modeling, with a focus on bacterial (E. coli, Coliform) and viral (Enterovirus, Adenovirus, Bacteriophage MS2) removal efficiencies. Combining an extensive literature review, exploratory data analysis (EDA), and machine learning modeling using XGBoost, this research provides new insights into the complex interactions between design parameters and SSF performance, ultimately contributing to the development of more efficient and sustainable SSF configurations. The study began with a systematic literature review of 135 experimental studies, identifying key design parameters and operational conditions of SSFs, including Filtration Rate (FR), Hydraulic Retention Time (HRT), Effective Grain Size (D10), Total Bed Height (T.B.H.), and Schmutzdecke characteristics. The literature review was supplemented with Exploratory Data Analysis (EDA) techniques such as scatterplots and correlation matrices to uncover trends and potential relationships between design parameters and removal efficiencies for bacteria and viruses. While the scatterplots and correlation matrices revealed limited linear relationships, they highlighted the complexity of the interactions, indicating the need for advanced modeling techniques capable of capturing nonlinear patterns. To address these complexities, XGBoost, a powerful machine learning model known for its ability to handle nonlinear relationships and parameter interactions, was developed and applied to the dataset. The model’s predictive capabilities were evaluated using performance metrics such as R², Mean Squared Error (MSE), and cross-validation results. Additionally, feature importance analysis was conducted using the XGBoost model, which provided insights into which design parameters and operational conditions had the most significant influence on removal efficiencies. A key contribution of this research was the development of interactive tools, such as feature contribution sliders and interactive heatmaps, which enabled dynamic exploration of how changes in design parameters affect removal efficiencies. These tools facilitated the simulation of design scenarios, offering an intuitive understanding of parameter impacts and guiding the formulation of new design paradigms. The model outputs were used to propose optimized parameter ranges that improve bacterial and viral removal while maintaining operational efficiency. The thesis further explored the robustness and reliability of the XGBoost models, discussing the results from controllable and uncontrollable design parameters and operational conditions and comparing the model’s predictive performance for bacterial and viral removal. In conclusion, this research highlights the effectiveness of XGBoost modeling for both predicting and explaining SSF performance. The insights gained provide a foundation for developing more efficient SSF design paradigms, enabling targeted adjustments to parameters based on model predictions. Additionally, the interactive tools created in this study offer practical resources for engineers to simulate different design configurations and optimize SSF performance. Overall, this thesis emphasizes the potential of machine learning to revolutionize the design and operation of SSFs, providing a foundation for future advancements in sustainable and effective water treatment technologies. ...
High-altitude páramo ecosystems in the Ecuadorian Andes, which serve a vital function in controlling the local water cycle, conserving biodiversity and securing the livelihoods of the inhabitants, are increasingly threatened. Climate variability, natural disasters and the growing pressure on natural resources due to extractive land use are the main driers. This study assesses the future environmental and social risks in the South Ecuadorian páramo surrounding Cuenca using a multidisciplinary approach. It focuses on hydrological change, slope instability, water quality and stakeholder conflict. Long-term in-situ observations made at the Zhurucay and Quinuas ecohydrological observatories are complemented by satellite and reanalysis data. We analyse multi-year trends in temperature, precipitation, soil moisture and solar radiation. Remote sensing data are calibrated and validated against ground measurements in order to make them applicable to data-scarce areas. This work also uses trend analysis and forecasting of time-series to identify the emerging hydro-meteorological patterns and the synthetic rainfall scenarios and spatial data sets to assess the slope instability under changed conditions. Additionally, water-quality risks related to changed runoff dynamics and potential mining activities are assessed. The study also includes an analysis of stakeholders of the mining Loma Larga project in order to examine how the differences in power, interests and perceived risks contribute to social tensions around water security and land use. The results show an increasing hydro-meteorological variability which may worsen the landslide risk and challenge the buffer capacities of páramo soils, while mining-related disturbances pose an additional threat to the water quality downstream and to the governance. This work integrates the physical science, remote sensing and social analysis in order to provide a comprehensive framework for understanding the coupled human-environment risks in the páramo systems. The finding may help policymakers navigate these trade-offs to support informed decision-making and ecosystem-based approaches to hazard mitigation in fragile high-mountain landscapes.
...
Doctoral thesis (2025) - G. Qin, S.G.J. Heijman, L.C. Rietveld
Rapid industrialization and urbanization over the past two decades have made water scarcity and water pollution the most serious and persistent challenges for people around the world. Membrane technologies have emerged as crucial solutions to tackle the global water shortage crisis, especially for the re-use of industrial effluents. Inorganic ceramic membranes are gaining increasing attention in industry due to their high mechanical and chemical stability, hydrophilicity, water permeability, antifouling abilities. Silicon carbide (SiC) membranes have shown the lowest fouling compared with other ceramic membranes. Therefore, recently, new methods have been developed to fabricate SiC membrane at a low temperature of 860 oC, using low pressure chemical vapor deposition (LPCVD). This thesis focuses on the fabrication and application of SiC-coated membranes, detailing their preparation via LPCVD and their performance in treating nano-sized oil-in-water (O/W) emulsions, real produced water, and laundry wastewater.

First of all, a novel approach is presented for effectively separating microemulsions via SiC (3C-SiC)-coated alumina (Al2O3) membranes, fabricated based on LPCVD. With the increase in deposition time, up to 25 min, the pore size of the membranes decreased from 41 nm (without deposition) to 33 nm (deposition time of 25 min). The polycrystalline 3C-SiC-coated membranes also showed an improved hydrophilicity (water contact angle of 15º) and highly negatively charged surfaces (-65 mV). Oil-in-water (O/W) microemulsions filtration experiments were carried out at a constant permeate flux (80 Lm-2h-1) for six cycles with varying deposition time, pH, surfactant types, and pore sizes. The fouling of the SiC-coated membrane was, compared to the Al2O3 membrane, effectively mitigated due to the enhanced electrostatic repulsion and hydrophilicity. Surfactant adsorption mainly occurred when the surface charge of the microemulsion and the membranes were opposite. Therefore, the surface charge of the Al2O3 membrane changed from positive to negative when soaked in negatively charged microemulsions, whereas SiC-coated membranes remained negatively charged regardless of surfactant type. The membrane fouling was alleviated when the membrane and oil droplets had the same charge.

Subsequently, the effects of the ionic strength (1, 20, and 100 mM) as well as different surfactants in O/W emulsions on the membrane fouling were studied. Four surfactants, including sodium dodecyl sulfate (SDS, anionic), alkyl polyglycoside (APG, non-ionic), cetyltrimethylammonium bromide (CTAB, cationic) and N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS, zwitterionic), were selected for this study. The Derjaguin-Landau-Verwey-Overbeek (DLVO) and extended DLVO (XDLVO) models were used to quantify interactions between the membrane-oil droplet and deposited oil layer-oil droplet surfaces and to compare these interactions with the fouling experiments. The (X)DLVO interaction energies of the membrane-oil droplet exhibited a strong agreement with the fouling tendencies at 1 mM salinity. The SiC-deposited membrane showed less (ir)reversible membrane fouling than the Al2O3 membrane when filtering O/W emulsions stabilized with SDS, APG, or DDAPS. The DLVO model predicted a higher tendency at higher salinity levels during the filtration of SDS, APG, or DDAPS-stabilized O/W emulsions and a decreased fouling tendency for CTAB-stabilized emulsion with the SiC-deposited membrane. However, at higher salinity levels, the XDLVO energy barrier was affected by both the repulsive electrostatic double layer (EL) interaction and attractive Lewis acid-base (AB) interaction. For the Al2O3 membrane, the XDLVO model obscured EL and Lifshitz-van der Waals (LW) interactions since the AB component was dominant, confirmed by the diminished XDLVO energy barrier, whereas for the SiC-deposited membrane, the EL interaction prevailed since the energy barrier value was positive.

Then real oilfield produced water with high salinity (142 mS/cm) and COD (22670 mg/L) was successfully treated by SiC-coated Al2O3 membranes in constant flux mode. The major findings were that pore blockage served as the initial (irreversible) fouling mechanism and that the (reversible) cake layer, a mixture of organic and inorganic components, dominated the rest of the filtration cycle, where the SiC-coated membrane performed better than the original Al2O3 membrane. In addition, it was found that the application of the SiC coating, and the selection of the appropriate pore size (62 nm) and crossflow velocity (0.8 m/s) increased the fouling mitigation, potentially advancing the utilization of ultrafiltration in treating saline produced water for reuse purposes.

Finally, synthetic wastewater containing cotton, linen, polyester, and nylon fibres and real laundry wastewater were characterized and prepared for filtration experiments, which were conducted at a flux of 70 Lm-2h-1 using an Al2O3 membrane and a SiC-coated membrane. Results revealed that natural textiles, particularly cotton and linen, released higher COD loads than synthetic fibers when tested at equal mass, in the trend of, cotton>linen>polyester>nylon, which was further supported by microscopic and SEM images. Both the Al2O3 membrane and the SiC-coated membrane showed a high fiber rejection (100 %), whereas the SiC-coated membrane showed lower reversible and irreversible fouling than the Al2O3 membrane, due to highly negatively charged surface. The fouling order of the fibers were in line with the COD concentration of the synthetic laundry wastewater containing these fibers. Finally, treatment of hot real laundry wastewater by the ceramic membranes not only mitigated membrane reversible and irreversible fouling, but also enabled the simultaneous recovery and reuse of water, surfactants, and thermal energy, offering a sustainable strategy to reduce both water consumption and energy costs.

...
Doctoral thesis (2025) - N.J. Gulamussen, L.C. Rietveld, Nelson Pedro Matsinhe
As fresh water is becoming progressively scarce due to increasing demand, as a result of high population growth, rapid economic development and climate change, and stricter regulations on wastewater discharge are set, world-wide the interest in water reclamation increases. The potential for resource recovery from wastewater and sludge is largely untapped and in developing countries, and in particular in Sub-Saharan Africa (SSA), only a small portion of these waste streams is used in a planned and safe manner.
Compared to surface water, reclaimed wastewater can also be an attractive source to increase water availability, because of the low fluctuations of flow and water quality and its abundance in the urban environment. Recognizing the many applications and benefits of water reclamation, the purpose of this thesis was to evaluate the potential of water reclamation for industrial use with Maputo as case study.
First a review was performed to provide a frame of reference for the trends in water reclamation for industrial use, the effluent quality and the degree of reliability that may be required, and to identify challenges and impediments to implementation. The findings of this review showed that although some examples of water reclamation implementation for industrial use exist, the region is challenged by the need to develop a framework that can facilitate the integration of social and technological methodologies and help to introduce water reclamation in water allocation planning, including the development of specific legislation for industrial water use and disposal in countries where it is not practiced as in the case of Mozambique.
Second, a framework for assessment of water reclamation for industrial use potential was developed and tested for the case of Maputo. It was found that Maputo, amongst others, requires changes in the sanitation infrastructure to increase the sewerage system coverage, a larger gap between drinking water demand and supply, legislation that encourages the use of reclaimed water by industries (incentives), and a higher technological capability to successfully implement water reclamation projects.
Third, a pilot test on the use of wastewater treatment plant (WWTP) effluent for unreinforced concrete production for the construction industry showed that the compressive strength of blocks manufactured using WWTP effluent had a similar strength to the blocks produced using drinking water. Ammonium, phosphate (impurities found in the WWTP effluent) and chlorine (added for disinfection) were found not to have a negative effect on the strength of the blocks. Water absorption tests confirmed the results of the compressive strength, as lower humidity was found in cases of higher strength.
Fourth, the development of a novel application of ceramic microfiltration treatment, focusing on hardness removal of model WWTP effluent for recirculating cooling systems make-up water indicated that softening can be combined with ceramic microfiltration for post-treatment of secondarily treated wastewater for use in cooling systems. The study also demonstrated that inhibition of calcium carbonate precipitation occurred when inorganic substances, such as phosphate, and organic compounds were present in the water, while the fouling of the membranes, due to sodium alginate in water, was only slightly negatively affected when combined with softening.
The thesis ends with the conclusion that the city of Maputo has potential for introducing water reclamation in industries, requiring well-planned interventions that include the opportunity of optimizing the use of water in different industries and institutions existent in the city and the vicinity. We have demonstrated that the central WWTP of Maputo could be used to supply water for cooling systems at a thermal power plant and construction industries, located nearby. To turn it possible, participatory and collaborative practices of the co-creation concept should be explored together with pilot studies, governance capacity evaluation and promotion of public private partnerships. ...
Water scarcity is a classic problem in the water management field. Water scarcity occurs when water is not renewed and cleaned at the same rate as it is used. Scholarship has indicated that water scarcity at a global level is increasing caused by climate change, and growing water demand. This growing water demand is primarily caused by increasing populations, domestic use, and economic activities. Additionally, the growing water demand is also caused by overuse, inefficiency in water use, weakness in the management of water use, and unsustainable water use behaviour.

Reducing water demand and enhancing water sustainability have emerged as priority measures on decision-makers’ agendas. An example is the indicator 6.4.1, “Increasing water-use efficiency (WUE)”, one of the Sustainable Development Goals formulated by the United Nations. These measures are on the water management programmes at a global level and also at regional and local levels. Currently, in urban and rural areas of countries such as Colombia, water scarcity is problematic due to extreme weather events such as the El Niño phenomena and urbanization. Under these circumstances, decision makers such as water managers and suppliers must simultaneously deal with guaranteed water supply and promote reduced water demand.

Decision makers typically focus on supply-side solutions, such as new water sources and construction of the reservoirs, and demand-side solutions, such as educational programs to raise awareness, the adoption of water-saving devices, economic incentives, and encouragement for the reduction in water use. To reduce water demand, these measures can mitigate drought conditions that occur more regularly and that do not necessarily translate into mid- to long-term water reductions. Besides conventional strategies, human decisions and actions are essential in reducing water use.

Behavioural factors such as attitudes and perceptions to assess relationships between human beings and water use are not usually integrated into supply and demand side solutions. For example, awareness initiatives often overlook why individuals do or do not adopt cost-effective water saving devices or why people take shorter showers or recycle greywater. Little progress has been made in understanding what drives the behaviour that can support policy to target and achieve urgent water savings.

Knowledge about water use behaviour in rural and peri-urban areas is still limited. Previous studies have identified a variety of contextual and psychological factors underlying water use behaviour at the household level. Most studies in this field have only been conducted in urban areas.

The research to date has focused on studying specific behavioural factors rather than integrated ones. Yet, few studies consider an integrated view of behavioural factors in shaping water use behaviour. We propose a systematic understanding of how contextual and psychological factors contribute to (in) efficient water use of water based on existing psychological approaches. This thesis aims to develop an integrated, systematic approach for identifying contextual and psychological factors underlying the (un) sustainable domestic use of water for applications in rural and peri-urban water supply systems.

We proposed a conceptual model which connects contextual and psychological factors to water use and represents relationships as supported by various environmental psychology approaches and theories, specifically the RANASt (risk, attitudes, norms, abilities, self-regulation and trust) approach and theory of values, beliefs and norms (VBN). The conceptual model has been applied to assess the relationship between contextual and psychological factors and to identify which factors underline the (un) sustainable domestic use of water. This conceptual model was then applied in a case study which included eight water supply systems, four in a peri-urban area of Cali and four in a rural area of Restrepo in the Valle del Cauca Department, situated in the western part of Colombia.

We collected self-reported data on water use activities through a cross-sectional survey, with a focus on domestic use from April to December 2021. A face-to-face survey was conducted with a random sample of 926 households which belong to eight water supply systems in rural villages and peri-urban zones in the Valle del Cauca Department in the western part of Colombia. We estimated water use efficiency based on survey data targeting the adoption of water saving devices (SP) and curtailment behaviour (SD), represented by shower duration. In this study we employed a quantitative methodology. Descriptive data were generated for all variables, and a multiple regression model was used to examine the relationship between water use and the contextual and psychological variables proposed by the RANASt and VBN theory.

Statistical analysis was used to identify various contextual and psychological factors underlying water use behaviour. A conceptual model integrating contextual and psychological factors, based on existing models and theories was proposed.

We found that the water supply was higher in rural areas than in peri-urban areas, even though the perceived water use was higher in peri-urban areas. Socioeconomic factors and proximity to capital cities can shed light on these results. Here, we show that the SP and SD variables exhibit relationships with contextual factors such as education level and location. The RANASt approach revealed that SD was related to attitudes, capabilities, and self-regulation. Meanwhile, SP was associated with risk, attitudes, social norms, and abilities. The relationship between environmental values, beliefs and norms, and SP, and SD was tested using VBN theory. The results of relationship analysis indicated that SP was connected to altruistic and egoistic values, as well as personal norms. Conversely, SD was linked to biospheric values and the moral duty to save water, which was recognized as a personal norm.

This study confirms that education level is associated with water use behaviour. However, the relationship between SD, SP, and location has not been previously described. The findings presented in this study suggest that policymakers often overlook the differences in organization and management between water supply systems far from urban areas and those nearer to urban areas when making decisions regarding water use reductions.

These results further support the idea that risk perception, attitudes about cost-benefit, abilities, altruistic, egoistic values, and social norms are connected with environmental behaviours. Consistent with the literature, which indicates that biospheric values might connect to environmental behaviours, this research found that these values connect with SD. This approach will be helpful in expanding our understanding of how the RANASt approach and VBN theory work help to examine water use behaviours.

Applying behavioural science to water use connects water management and the social sciences. This study’s methodology includes innovative and interdisciplinary methods, such as integrating engineering with the social sciences. To integrate both fields is essential to shift from unsustainable to sustainable water supply systems and to promote sustainable water practices. The findings will be of interest mainly to decision makers, such as water managers and academics, who want to include human behaviour components into water supply and demand side solutions.

Various areas around the globe that are facing overuse and highwater demand could also gain insights from this study by including human behaviour when examining water usage. The systematic approach used to examine contextual and psychological factors, and the conceptual model proposed in this study might be applied to other water supply systems elsewhere in the world.
...
Doctoral thesis (2025) - Celma Niquice, J.B. van Lier, L.C. Rietveld
Understanding the potential and constraints of water reclamation is essential for the decision makers to design interventions that improve the process in a safely manner e.g. for Maputo, Mozambique. In this thesis i) the potential and constraints of using (partially) treated wastewater in irrigated agriculture for sub-Saharan Africa (SSA) was analysed; ii) the concentration of the indicator Escherichia coli (E. coli) in irrigation water, the lettuce (Lactuca sativa) produced in the irrigation fields in Infulene Valley, in Maputo, Mozambique, and the lettuce subsequently sold at local markets in Maputo was assessed; iii) and the potential contribution of wastewater-based nutrients to the supply of nitrogen (N), phosphorous (P), and potassium (K) for lettuce production in the Infulene Valley, in Maputo, Mozambique, was studied.

An extensive literature review was performed for existing examples of water reclamation in sub-Saharan Africa, followed by laboratorial analyses of water, soil and lettuce samples collected in the Infulene valley in Maputo. We analysed the faecal coliform contamination considering the E. coli as its indicator, the content of nutrients (Nitrogen, Phosphorous and Potassium), and the potential toxic elements (PTE) present in the samples.

Water reclamation is informally practiced in many SSA countries, with wide use of untreated reclaimed wastewater in agriculture. Wastewater quality in most of SSA countries is regulated by the 1989 WHO guidelines, instead of its more recent 2006 guidelines. The 1989 WHO guidelines are based on restrictive effluent criteria, which are more practical to use, compared to the 2006 WHO guidelines. However, the 1989 WHO guidelines are not effective for risk reduction of the farmers’ practices, based on the installed wastewater treatment capacity and the vulnerability of contamination along the supply chain. The 2006 WHO guidelines are more complex to implement for most of the SSA countries. The multiple barrier approach has been proposed for safe water reclamation combining the treatment and the critical points for quality control in the value chain to reduce the health risks. This requires the development of a water reclamation approach, which matches the required water quality at the point of use and the design of an affordable wastewater treatment, which reduces risks on the long term. Overall, it was concluded that there is a potential in SSA countries for water reclamation, although it requires the development of the relatively poor water and sanitation infrastructure to support its implementation.

We found that irrigation water is not the only potential source of faecal contamination in the value chain of lettuce produced at farms and sold at local markets of Maputo. The lettuce produced in the Infulene valley was also contaminated along the value chain, regardless of the irrigation source. The process of washing lettuce in the market presents a potential for re-contamination and it contributes little in risk reduction. Some measures for reducing the risk of contamination such as delaying harvest at the farm, and hygienic practices at the marketplace will impact the contamination levels of the lettuce, irrespective of the use of reclaimed wastewater or other water sources for irrigation in the Infulene Valley in Maputo.

Our analysis revealed further that wastewater is a viable alternative for nutrient supply in the Infulene Valley. It contains higher amounts of essential nutrients (N, P, and K) compared to groundwater. This highlights the potential of wastewater as an effective source to (1) re-plenish nutrients in agricultural systems to meet crop nutrient demands and (2) to reduce reliance on traditional fertilizers. However, careful nutrient management is crucial to avoid excessive nutrient dosing, which can lead to health and environmental hazards such as groundwater pollution, pollution of water ways, and soil degradation. Implementing strategies such as combined source control, frequent water monitoring, and appropriate treatment options can help for ferti-irrigation in peri-urban areas like the Infulene Valley.

Finally, our data showed that PTE were present at low concentrations in the irrigation water and soil. In plants, the concentration of chromium, aluminium, iron and sodium exceeded the recommended levels, suggesting sources unrelated to irrigation water. The high concentration of certain PTE when using river water and wastewater revealed the need for monitoring and understanding the elemental composition of crops, especially when different irrigation sources are used. Additionally, elevated sodium adsorption ratios and electrical conductivity levels across irrigation sources emphasize the need for cautious use of wastewater for irrigation. Monitoring activities are recommended for the Infulene valley, in order to prevent accumulation of Mn, Al, Fe, Cr and Na, which potentially have negative impacts on the crop production, environment, and food security.

Overall, it can be concluded that the promotion of safe water reclamation in SSA countries should be implemented applying a holistic approach, including water treatment and the entire agricultural value chain that includes crop producers (farms), crop handlers, market vendors, and end consumers. Planners should consider the ‘farm-to-market-consumer’ chain to implement local safety measures that mitigate risks. Change in social behaviour towards reclaimed wastewater also represents an important aspect for inclusion in activities towards the implementation of safe water reclamation. At policy level, persistent behaviours should also be changed to facilitate revisiting infrastructures and policies for reclaiming wastewater. In addition, initiatives for water reclamation should consider all potential end users, such as agricultural and industrial users, while embedding opportunities for a circular economy for a positive impact on farmers, society, and the environment.
...
EngD thesis (2025) - S. Apoorva, L.C. Rietveld, J.P. van der Hoek, K.M. Lompe, René van der Aa
Per- and polyfluoroalkyl substances (PFAS) have emerged as one of the most persistent classes of organic micropollutants (OMPs) in the aquatic environment. Their chemical stability and widespread use have led to their continuous detection in surface and groundwater sources, posing potential risks to human health. Considering the updated European Drinking Water Directive (DWD) and the Dutch National Institute for Public Health and the Environment (RIVM) provisional guideline of 4.4 ng PFOA-equivalent per litre (PEQ/L), conventional treatment processes are increasingly insufficient to ensure regulatory compliance. This EngD project, conducted within the ToDrinQ consortium and in collaboration with Waternet, aimed to explore the feasibility of adsorption-based treatment using innovative adsorbents as an advanced PFAS polishing step at the Leiduin Drinking Water Treatment Plant (DWTP).

The research followed a four-phase design cycle—Discover, Define, Design, and Develop—combining literature review, stakeholder analysis, laboratory testing, economic and environmental assessments, and pilot-scale conceptual design. Two promising adsorbent materials were evaluated: Dexsorb+ (cyclodextrin-based polymer) and Zeolite (aluminosilicate mineral). Laboratory batch experiments were conducted to assess PFAS adsorption and regeneration characteristics with water collected from Leiduin. Performance was evaluated using removal efficiency, kinetics, and adsorption capacity, with additional consideration of regeneration feasibility and compliance with KIWA certification standards.

Experimental results showed that Dexsorb+ achieved PFAS removal efficiencies exceeding 85%, effectively capturing both long- and short-chain compounds, while Zeolites exhibited faster adsorption kinetics and greater structural robustness. However, neither material fully met all operational and economic criteria without further optimisation. The estimated capital expenditure (CAPEX) was approximately €16.8 million for Dexsorb+ and €39.7 million for Zeolite, with corresponding five-year net present values (NPVs) of –€13.4 million and –€36.4 million, respectively. The life-cycle cost analysis (LCCA) indicated that both options currently result in negative NPVs under realistic cost structures, with Dexsorb+ reaching break-even after approximately 40 years, while Zeolite remains unprofitable within a 50-year horizon. Sensitivity analysis identified the adsorbent bulk cost as the dominant variable influencing financial feasibility; an 80–90% reduction in Zeolite price could render it economically viable within 10–20 years. From an environmental perspective, both materials demonstrated CO₂ footprints comparable to Granular Activated Carbon (GAC), with solvent make-up and regeneration energy contributing up to 15% of total emissions. Achieving 95% solvent recovery could substantially reduce the overall environmental impact.

From a systems perspective, integrating the innovative adsorbents downstream of the first GAC stage was identified as the most practical configuration for Leiduin. The conceptual pilot design utilises the existing column infrastructure existing column infrastructure, targeting 85% PFAS removal at a flow rate of 0.5 m³/h. Regeneration was intentionally excluded from the pilot phase due to ATEX safety requirements for solvent handling. Nevertheless, adsorption-only testing will yield valuable operational data to support future scale-up.

Overall, this EngD study demonstrates that adsorption with innovative materials can play a key role in achieving sub-ng/L PFAS concentrations, but significant advancements in material cost reduction, regeneration technology, and certification are necessary before full-scale implementation. The outcomes contribute to Waternet’s strategic goal of futureproofing drinking water treatment under tightening PFAS regulations and provide a foundation for continued innovation within the ToDrinQ framework. ...
Doctoral thesis (2025) - A. Jan, L.C. Rietveld, S.G.J. Heijman
Stringent industrial wastewater discharge regulations and rising energy costs demand industries to shift to sustainable water treatment technologies. The conventional physical-chemical wastewater treatment processes struggle to separate inorganic ions and emulsions. While polymeric membranes have limited mechanical, thermal and chemical stability. Ceramic membranes, and in particular silicon carbide (SiC) membranes, have emerged as promising alternatives due to their mechanical strength, thermal resilience, resistance to fouling, low isoelectric point, and super hydrophilicity. However, fabricating both SiC membrane supports and the selective layers require sintering temperatures of ca. 2100°C, with consequent high energy consumption. Additionally, preparing a SiC selective layer requires multiple coating and sintering cycles, which hinder precise pore size control and economic feasibility. To address these limitations, this thesis explores low-pressure chemical vapor deposition (LPCVD) as a route to coat commercially available alumina (Al2O3) supports by SiC at moderate temperatures to replace full SiC membranes... ...

Selectrodialysis for Nutrient Recovery from Greenhouse Wastewater

Master thesis (2024) - D. Kaur, L.C. Rietveld, M.B. Tanis, J.B. van Lier, Tavishi Guleria
This thesis examines the feasibility of Selectrodialysis as an innovative and efficient technology for nutrient recovery from greenhouse wastewater. The study aims to address the critical challenges of water quality degradation and Na+ accumulation in greenhouse operations, where the selective recovery of ions such as Na⁺, Ca²⁺, and Mg²⁺ is essential for maintaining optimal plant health and agricultural productivity.

The research evaluates the performance of SED by investigating the effects of various operational parameters, particularly voltage, and the presence of competing cations on ion transport efficiency. Experimental analysis revealed that SED could effectively achieve selective ion separation at an optimal voltage of 9V, which maximizes ion fractionation and migration rates while maintaining moderate energy consumption. However, higher voltages resulted in increased energy demands, water dissociation, and concentration polarization, which adversely impacted the selectivity of specific ions, particularly Na⁺.

The presence of competing cations, such as Ca²⁺ and Mg²⁺, was shown which significantly impacts the Na⁺ transport by reducing its migration rate and recovery efficiency. These effects are primarily due to competitive interactions and increased membrane resistance caused by concentration polarization, particularly at higher concentrations of divalent cations. Understanding these interactions is crucial for optimizing the recovery process and energy efficiency in systems where competing cations are prevalent.

The study also highlights the economic implications of implementing SED compared to conventional methods like RO. While SED demonstrates technical advantages in terms of selective ion recovery and reduced chemical usage, its broader adoption is constrained by significantly higher capital and operational costs. The total capital cost for SED was found to be over 13 times higher than that of RO, primarily due to the specialized membranes required for selective ion transport and the additional electrical components necessary for ion migration. Additionally, operational costs for SED are elevated due to higher energy consumption, which is more than double that of RO, and increased maintenance expenses resulting from the complexity of the system.

Despite its technical feasibility, the economic analysis suggests that SED may be better suited for niche applications where selective ion recovery is critical, such as in high-value greenhouse operations where precise nutrient control is essential. To improve the economic viability of SED, future research should focus on integrating renewable energy sources, experimenting with new membrane materials, and exploring different operational modes to reduce energy consumption and overall costs.
...
This research explores the feasibility of implementing ceramic microfiltration (CMF) treatment in Maputo, Mozambique, to reclaim wastewater for industrial reuse, addressing the city's pressing water scarcity challenges. As rapid urbanization increases Maputo's reliance on potable water for industrial and agricultural needs, this study evaluates reclaimed wastewater as a sustainable alternative to alleviate demand on the city's limited freshwater resources. Using a CMF pilot plant, the project tested wastewater from the recently upgraded Infulene Wastewater Treatment Plant (WWTP) to assess whether CMF treatment could achieve quality standards suitable for applications such as cooling, concrete production, car washes, agricultural irrigation, and municipal park irrigation. Furthermore, the opportunity of scalability was tested through a water balance, while relevant stakeholders were interviewed and costs estimated to complete the feasibility assessment.

Laboratory results indicated that CMF treatment effectively reduces turbidity, chemical oxygen demand (COD), and biological pollutants like E. coli and coliforms. However, dissolved particles and heavy metals were not removed, limiting its efficacy for high-specification uses. While the treated effluent met quality standards for lower-specification applications, such as local car washes and park irrigation, it did not reach the stricter requirements needed for cooling water or concrete production. This underscores a need for process optimization, particularly through coagulation, to expand CMF's application range.

To assess sustainable water availability, a water balance analysis of the Infulene WWTP considered seasonal flows and local agricultural demands. The findings suggest that although the current water supply is insufficient during dry months, full capacity utilization and improved sewer network connections in the future could support CMF-based water reuse consistently across seasons, with potential scalability for additional users.

Economic analysis compared CMF's capital and operational costs with revenue from reclaimed water sales, showing that while considerable initial investment is required, direct piping could potentially make CMF-treated water competitively priced against potable supplies under the condition of reaching maximum treatment capacity at a scaled up CMF plant. High costs associated with truck-based delivery, however, present a barrier to adoption for potential users. Stakeholder interest was strong across industrial users and developers, though contingent on achieving cost parity with the existing water network.

This study concludes that, while integrating CMF technology into Maputo's water management strategy offers promise, challenges remain in achieving quality standards for certain industrial applications and in lowering costs. Addressing these technical and economic barriers could open avenues for CMF's broader adoption, especially with future assessments that include alternative suppliers and configurations. ...