Developing an adsorption unit for PFAS separation in drinking water production (Leiduin) using innovative adsorbent(s)

Engd Thesis (2025)
Author(s)

S. Apoorva (TU Delft - Civil Engineering & Geosciences)

Contributor(s)

L.C. Rietveld – Supervisor (TU Delft - Civil Engineering & Geosciences)

J.P. van der Hoek – Supervisor (TU Delft - Civil Engineering & Geosciences)

K.M. Lompe – Supervisor (TU Delft - Civil Engineering & Geosciences)

René van der Aa – Supervisor (Waternet)

Research Group
Sanitary Engineering
More Info
expand_more
Publication Year
2025
Language
English
Graduation Date
14-11-2025
Awarding Institution
Delft University of Technology
Research Group
Sanitary Engineering
Page Views
112
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Per- and polyfluoroalkyl substances (PFAS) have emerged as one of the most persistent classes of organic micropollutants (OMPs) in the aquatic environment. Their chemical stability and widespread use have led to their continuous detection in surface and groundwater sources, posing potential risks to human health. Considering the updated European Drinking Water Directive (DWD) and the Dutch National Institute for Public Health and the Environment (RIVM) provisional guideline of 4.4 ng PFOA-equivalent per litre (PEQ/L), conventional treatment processes are increasingly insufficient to ensure regulatory compliance. This EngD project, conducted within the ToDrinQ consortium and in collaboration with Waternet, aimed to explore the feasibility of adsorption-based treatment using innovative adsorbents as an advanced PFAS polishing step at the Leiduin Drinking Water Treatment Plant (DWTP).

The research followed a four-phase design cycle—Discover, Define, Design, and Develop—combining literature review, stakeholder analysis, laboratory testing, economic and environmental assessments, and pilot-scale conceptual design. Two promising adsorbent materials were evaluated: Dexsorb+ (cyclodextrin-based polymer) and Zeolite (aluminosilicate mineral). Laboratory batch experiments were conducted to assess PFAS adsorption and regeneration characteristics with water collected from Leiduin. Performance was evaluated using removal efficiency, kinetics, and adsorption capacity, with additional consideration of regeneration feasibility and compliance with KIWA certification standards.

Experimental results showed that Dexsorb+ achieved PFAS removal efficiencies exceeding 85%, effectively capturing both long- and short-chain compounds, while Zeolites exhibited faster adsorption kinetics and greater structural robustness. However, neither material fully met all operational and economic criteria without further optimisation. The estimated capital expenditure (CAPEX) was approximately €16.8 million for Dexsorb+ and €39.7 million for Zeolite, with corresponding five-year net present values (NPVs) of –€13.4 million and –€36.4 million, respectively. The life-cycle cost analysis (LCCA) indicated that both options currently result in negative NPVs under realistic cost structures, with Dexsorb+ reaching break-even after approximately 40 years, while Zeolite remains unprofitable within a 50-year horizon. Sensitivity analysis identified the adsorbent bulk cost as the dominant variable influencing financial feasibility; an 80–90% reduction in Zeolite price could render it economically viable within 10–20 years. From an environmental perspective, both materials demonstrated CO₂ footprints comparable to Granular Activated Carbon (GAC), with solvent make-up and regeneration energy contributing up to 15% of total emissions. Achieving 95% solvent recovery could substantially reduce the overall environmental impact.

From a systems perspective, integrating the innovative adsorbents downstream of the first GAC stage was identified as the most practical configuration for Leiduin. The conceptual pilot design utilises the existing column infrastructure existing column infrastructure, targeting 85% PFAS removal at a flow rate of 0.5 m³/h. Regeneration was intentionally excluded from the pilot phase due to ATEX safety requirements for solvent handling. Nevertheless, adsorption-only testing will yield valuable operational data to support future scale-up.

Overall, this EngD study demonstrates that adsorption with innovative materials can play a key role in achieving sub-ng/L PFAS concentrations, but significant advancements in material cost reduction, regeneration technology, and certification are necessary before full-scale implementation. The outcomes contribute to Waternet’s strategic goal of futureproofing drinking water treatment under tightening PFAS regulations and provide a foundation for continued innovation within the ToDrinQ framework.

Files

License info not available
warning

File under embargo until 14-11-2027