UV-Visible Light Driven Bismuth Vanadate (BiVO4) based Photoanodes for the Removal of Organic Micropollutants in Water
A.Z. Ali (TU Delft - Civil Engineering & Geosciences)
L.C. Rietveld – Promotor (TU Delft - Civil Engineering & Geosciences)
J.P. van der Hoek – Promotor (TU Delft - Civil Engineering & Geosciences)
H. Spanjers – Promotor (TU Delft - Civil Engineering & Geosciences)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
The increasing contamination of surface water and groundwater with organic micropollutants (OMPs) poses serious environmental and public health risks. These OMPs, originating from municipal and industrial wastewater streams, include pharmaceuticals, pesticides, personal care products and industrial chemicals. Although typically present in concentrations ranging from ng L-1 to few μg L-1, they are persistent, bioactive and can lead to antibiotic resistance, endocrine disruption and even carcinogenic effects. Current wastewater treatment technologies are ineffective towards the complete removal of most OMPs present in the wastewater. Therefore, additional treatment steps are essential.
Among advanced treatment methods, photoelectrocatalytic based advanced oxidation processes (PEC-AOPs) have attracted increasing interest due to their ability to generate reactive oxygen species (ROS), such as hydroxyl radicals (•OH) and superoxide radicals (•O₂⁻). These ROS can degrade OMPs into less harmful products or mineralizing them entirely. Bismuth vanadate (BiVO4) has emerged as a visible-light-responsive photocatalyst for PECAOPs due to its narrow band gap (~2.4 eV) and photostability. However, its practical application is limited by fast charge recombination and limited scalability in real wastewater. Most studies are limited to a single pollutant at high concentrations (1–10 mg L-1) in demineralized or ultra-pure water, with limited attention to real-world scenarios involving mixtures of OMPs at concentrations below 1 mg L-1. Moreover, few studies address scalability using process level simulations. Knowledge gaps thus include understanding the simultaneous removal of multiple OMPs at concentrations below 1 mg L-1 and integrating lab-scale reaction insights into conceptual reactor models using realistic operational variables.
This dissertation presents a comprehensive study on BiVO4 based photoanodes for the photoelectrocatalytic removal of OMPs, with the objective of effectively removing single and multiple OMPs from demineralized water at concentrations below 1 mg L-1. To achieve this objective, pristine BiVO₄ was first investigated as a baseline visible-light-responsive photoanode. Subsequently, two heterojunction strategies were investigated to overcome the intrinsic charge-carrier recombination limitation of BiVO₄. BiVO₄/BiOI was selected to enhance charge separation and extend visible-light absorption, whereas TiO₂-GO was coupled with BiVO₄ to further improve charge separation and interfacial properties. In the TiO₂-GO layer, graphene oxide (GO) was incorporated because of its ability to promote charge separation and provide a high specific surface area for adsorption of OMP molecules. In addition, the study explored reactor scale-up using computational fluid dynamics (CFD). Pristine BiVO4 photoanodes using a simple dip-coating method on fluorine-doped tin oxide (FTO) substrates have been fabricated, followed by thermal annealing at 460°C for 2 h. These photoanodes were structurally and opto-electronically characterized and subsequently tested for the simultaneous removal of three environmentally relevant OMPs - acetaminophen, benzotriazole and propranolol - each at 45 μg L-1 in demineralized water. When operated at an applied voltage of 1 V (vs Ag/AgCl) under simulated solar irradiation, the photoanode achieved removal efficiency of 99% for both acetaminophen and propranolol and 70% for benzotriazole within 2 h. The degradation followed first-order kinetics, with rate coefficients of 2.84 × 10⁻², 2.44 × 10⁻², and 9.35 × 10⁻³ min⁻¹ for acetaminophen, propranolol, and benzotriazole, respectively, demonstrating substantially slower degradation of benzotriazole. Quenching experiments indicated that •OH was the dominant reactive species…