Circular Image

N.J. Gulamussen

info

Please Note

4 records found

Doctoral thesis (2025) - N.J. Gulamussen, L.C. Rietveld, Nelson Pedro Matsinhe
As fresh water is becoming progressively scarce due to increasing demand, as a result of high population growth, rapid economic development and climate change, and stricter regulations on wastewater discharge are set, world-wide the interest in water reclamation increases. The potential for resource recovery from wastewater and sludge is largely untapped and in developing countries, and in particular in Sub-Saharan Africa (SSA), only a small portion of these waste streams is used in a planned and safe manner.
Compared to surface water, reclaimed wastewater can also be an attractive source to increase water availability, because of the low fluctuations of flow and water quality and its abundance in the urban environment. Recognizing the many applications and benefits of water reclamation, the purpose of this thesis was to evaluate the potential of water reclamation for industrial use with Maputo as case study.
First a review was performed to provide a frame of reference for the trends in water reclamation for industrial use, the effluent quality and the degree of reliability that may be required, and to identify challenges and impediments to implementation. The findings of this review showed that although some examples of water reclamation implementation for industrial use exist, the region is challenged by the need to develop a framework that can facilitate the integration of social and technological methodologies and help to introduce water reclamation in water allocation planning, including the development of specific legislation for industrial water use and disposal in countries where it is not practiced as in the case of Mozambique.
Second, a framework for assessment of water reclamation for industrial use potential was developed and tested for the case of Maputo. It was found that Maputo, amongst others, requires changes in the sanitation infrastructure to increase the sewerage system coverage, a larger gap between drinking water demand and supply, legislation that encourages the use of reclaimed water by industries (incentives), and a higher technological capability to successfully implement water reclamation projects.
Third, a pilot test on the use of wastewater treatment plant (WWTP) effluent for unreinforced concrete production for the construction industry showed that the compressive strength of blocks manufactured using WWTP effluent had a similar strength to the blocks produced using drinking water. Ammonium, phosphate (impurities found in the WWTP effluent) and chlorine (added for disinfection) were found not to have a negative effect on the strength of the blocks. Water absorption tests confirmed the results of the compressive strength, as lower humidity was found in cases of higher strength.
Fourth, the development of a novel application of ceramic microfiltration treatment, focusing on hardness removal of model WWTP effluent for recirculating cooling systems make-up water indicated that softening can be combined with ceramic microfiltration for post-treatment of secondarily treated wastewater for use in cooling systems. The study also demonstrated that inhibition of calcium carbonate precipitation occurred when inorganic substances, such as phosphate, and organic compounds were present in the water, while the fouling of the membranes, due to sodium alginate in water, was only slightly negatively affected when combined with softening.
The thesis ends with the conclusion that the city of Maputo has potential for introducing water reclamation in industries, requiring well-planned interventions that include the opportunity of optimizing the use of water in different industries and institutions existent in the city and the vicinity. We have demonstrated that the central WWTP of Maputo could be used to supply water for cooling systems at a thermal power plant and construction industries, located nearby. To turn it possible, participatory and collaborative practices of the co-creation concept should be explored together with pilot studies, governance capacity evaluation and promotion of public private partnerships. ...
There is a global need for optimizing the use of water that has resulted from increased demand due to industrial development, population growth, climate change and the pollution of natural water resources. One of the solutions is to use reclaimed water in industrial applications that do not require water of potable quality, such as cooling water. However, for cooling water, (treated) wastewater’s hardness is too high, apart from having a high load of suspended solids and organic matter. Therefore, a combination of softening with ceramic micro-filtration was proposed for treating wastewater treatment effluent containing fouling agents for potential use in industrial cooling systems. The effectiveness of the softening process on model-treated wastewater with calcium hydroxide in the presence of phosphate and sodium alginate was first evaluated using jar tests. Furthermore, membrane fouling was studied when filtering the softened water. The results showed that the inhibition of calcium carbonate precipitation occurred when inorganic substances, such as phosphate and organic compounds, were present in the water. The fouling of the membranes due to sodium alginate in water was only slightly negatively affected when combined with softening and phosphate. Therefore, this combination of treatments could be potentially helpful for the post-treatment of secondary effluent for cooling systems. ...
Journal article (2021) - N. J. Gulamussen, A. M. Arsénio, N. P. Matsinhe, R. S. Manjate, L. C. Rietveld
Experiments were conducted to evaluate the possibilities of using treated wastewater for the production of unreinforced concrete blocks. Compressive strength, water absorption and morphology tests of concrete blocks, produced from different makeups of mixing water, drinking water, drinking water spiked with ammonium and phosphate, and the effluent of the city’s wastewater treatment plant, were evaluated. Results showed that the compressive strength of blocks manufactured using treated wastewater was as high as of the blocks produced using drinking water. Ammonium, phosphate and chlorine were found not to have a negative effect on the strength of the blocks. Water absorption tests confirmed the results of the compressive strength, as lower humidity was found in cases of higher strength. In the process of cement hydration, crystals of calcium silicate and calcium hydroxide were observed by morphology tests. From the variability in the results, it could be concluded that the quality of the mixing water was not the only factor that influenced the strength of the unreinforced concrete blocks. The observed differences in strength could, for example, also be attributed to the manufacturing process. ...
Journal article (2019) - Noor Jehan Gulamussen, André Marques Arsénio, Nelson Pedro Matsinhe, Louis Cornelis Rietveld
The increasing world population and growth of industrial development lead to growing water scarcity that, combined with deficient sanitation services, represents serious challenges, particularly in regions like sub-Saharan Africa. Water reclamation is a promising approach to reduce water scarcity, serving as a driving force for better sanitation services and protecting the environment by treating sewage and redistributing for the benefit of other water-dependent applications (e.g., industries). This paper aims to give an overview of the global trends on water reclamation, with a focus on industrial use, and to derive lessons for implementation of water reclamation projects in sub-Saharan Africa. Findings show that extensive experience exists in technology and management practices that can allow successful implementation of water reclamation projects in the region. Under the conditions of deficient sanitation services and low levels of technical expertise, the main challenge is to develop a framework that can facilitate the integration of social and technological methodologies and help in introducing water reclamation in water allocation planning, including the development of specific legislation for industrial water use and disposal. ...