Heterostructures (HSs) based on two-dimensional transition metal dichalcogenides (TMDCs) are highly intriguing materials because of the layers’ pronounced excitonic properties and their nontrivial contributions to the HS. These HSs exhibit unique properties that are not observed in either of the constituent components in isolation. Interlayer excitons (IEs), which are electron-hole pairs separated across the HSs, play a central role in determining these HS properties and are of interest both fundamentally and for device applications. In recent years, a major focus has been on understanding and designing HSs composed of two or more TMDC materials. Less attention has been paid to HSs composed of one TMDC layer and a layer of perovskite material. A central challenge in the understanding of HS properties is that basic measurements such as optical spectroscopic analysis can be misinterpreted due to the complexity of the charge transfer dynamics. Addressing these aspects, this review presents an overview of the most common and insightful optical spectroscopic techniques used to study TMDC/TMDC and TMDC/halide perovskite HSs. Emphasis is placed on the interpretation of these measurements in terms of charge transfer and the formation of IEs. Recent advances have started to uncover highly interesting phenomena, and with improved understanding these HSs offer great potential for device applications such as photodetectors and miniaturized optics.

@en

Rhenium disulfide, a member of the transition metal dichalcogenide family of semiconducting materials, is unique among 2D van der Waals materials due to its anisotropy and, albeit weak, interlayer interactions, confining excitons within single atomic layers and leading to monolayer-like excitonic properties even in bulk crystals. While recent work has established the existence of two stacking modes in bulk, AA and AB_, the influence of the different interlayer coupling on the excitonic properties has been poorly explored. Here, we use polarization-dependent optical measurements to elucidate the nature of excitons in AA and AB-stacked rhenium disulfide to obtain insight into the effect of interlayer interactions. We combine polarization-dependent Raman with low-temperature photoluminescence and reflection spectroscopy to show that, while the similar polarization dependence of both stacking orders indicates similar excitonic alignments within the crystal planes, differences in peak width, position, and degree of anisotropy reveal a different degree of interlayer coupling. DFT calculations confirm the very similar band structure of the two stacking orders while revealing a change of the spin-split states at the top of the valence band to possibly underlie their different exciton binding energies. These results suggest that the excitonic properties are largely determined by in-plane interactions, however, strongly modified by the interlayer coupling. These modifications are stronger than those in other 2D semiconductors, making ReS₂ an excellent platform for investigating stacking as a tuning parameter for 2D materials. Furthermore, the optical anisotropy makes this material an interesting candidate for polarization-sensitive applications such as photodetectors and polarimetry.

@en

Assembled perovskite nanocrystals (NCs), known as supercrystals (SCs), can have many exotic optical and electronic properties different from the individual NCs due to energy transfer and electronic coupling in the dense superstructures. We investigate the optical properties and ultrafast carrier dynamics of highly ordered SCs and the dispersed NCs by absorption, photoluminescence (PL), and femtosecond transient absorption (TA) spectroscopy to determine the influence of the assembly on the excitonic properties. Next to a red shift of absorption and PL peak with respect to the individual NCs, we identify signatures of the collective band-like states in the SCs. A smaller Stokes shift, decreased biexciton binding energy, and increased carrier cooling rates support the formation of delocalized states as a result of the coupling between the individual NC states. These results open perspectives for assembled perovskite NCs for application in optoelectronic devices, with design opportunities exceeding the level of NCs and bulk materials.

@en

In conventional solar cell semiconductor materials (predominantlySi)photons with energy higher than the band gap initially generate hot electrons and holes, which subsequently cool down to the band edge by phonon emission. Due to the latter process,the energy of the charge carriers in excess of the band gap is lost as heat and does not contribute to the conversion of solar to electrical power. If the excess energy is more than the band gap itcan in principle be utilized through a process known as carrier multiplication (CM) in which a single absorbed photon generates two (or more) pairs of electrons and holes. Thus, through CM the photon energy abovetwice the band gap enhancesthe photocurrentofa solar cell. In this review, we discuss recent progress in CM research in terms of fundamental understanding, emergenceof new materials for efficient CM, and CM based solar cell applications. Based on our current understanding, the CM threshold can get close to the minimal value of twice the band gap in materials where a photon induces an asymmetric electronic transition from a deeper valence band or to a higher conduction band. In addition,the material must have a low exciton binding energy and high charge carrier mobility, so that photoexcitation leads directly to the formation of free charges that can readily be extracted at external electrodes of a photovoltaic device. Percolative networks of coupled PbSe quantum dots, Sn/Pb based halide perovskites,and transition metal dichalcogenides such as MoTe2fulfill these requirements to a large extent. These findings pointtowards promising prospects for further development of new materials for highly efficient photovoltaics. @en

Photon recycling, the iterative process of re-Absorption and re-emission of photons in an absorbing medium, can play an important role in the power-conversion efficiency of photovoltaic cells. To date, several studies have proposed that this process may occur in bulk or thin films of inorganic lead-halide perovskites, but conclusive proof of the occurrence and magnitude of this effect is missing. Here, we provide clear evidence and quantitative estimation of photon recycling in CsPbBr3 nanocrystal suspensions by combining measurements of steady-state and time-resolved photoluminescence (PL) and PL quantum yield with simulations of photon diffusion through the suspension. The steady-state PL shows clear spectral modifications including red shifts and quantum yield decrease, while the time-resolved measurements show prolonged PL decay and rise times. These effects grow as the nanocrystal concentration and distance traveled through the suspension increase. Monte Carlo simulations of photons diffusing through the medium and exhibiting absorption and re-emission account quantitatively for the observed trends and show that up to five re-emission cycles are involved. We thus identify 4 quantifiable measures, PL red shift, PL QY, PL decay time, and PL rise time that together all point toward repeated, energy-directed radiative transfer between nanocrystals. These results highlight the importance of photon recycling for both optical properties and photovoltaic applications of inorganic perovskite nanocrystals.

@en

We studied the nature of excitons in the transition metal dichalcogenide alloy Mo0.6W0.4S2 compared to pure MoS2 and WS2 grown by atomic layer deposition (ALD). For this, optical absorption/transmission spectroscopy and time-dependent density functional theory (TDDFT) were used. The effects of temperature on A and B exciton peak energies and line widths in optical transmission spectra were compared between the alloy and pure MoS2 and WS2. On increasing the temperature from 25 to 293 K, the energy of the A and B exciton peaks decreases, while their line width increases due to exciton-phonon interactions. The exciton-phonon interactions in the alloy are closer to those for MoS2 than those for WS2. This suggests that exciton wave functions in the alloy have a larger amplitude on Mo atoms than that on W atoms. The experimental absorption spectra could be reproduced by TDDFT calculations. Interestingly, for the alloy, the Mo and W atoms had to be distributed over all layers. Conversely, we could not reproduce the experimental alloy spectrum by calculations on a structure with alternating layers, in which every other layer contains only Mo atoms and the layers in between also contain W atoms. For the latter atomic arrangement, the TDDFT calculations yielded an additional optical absorption peak that could be due to excitons with some charge transfer character. From these results, we conclude that ALD yields an alloy in which Mo and W atoms are distributed uniformly among all layers.

@en

Few-layered transition-metal dichalcogenides (TMDs) are increasingly popular materials for optoelectronics and catalysis. Among the various types of TMDs available today, rhenium chalcogenides (ReX2) stand out due to their remarkable electronic structure, such as the occurrence of anisotropic excitons and potential direct band gap behavior throughout multilayered stacks. In this paper, we have analyzed the nature and dynamics of charge carriers in highly crystalline liquid-phase exfoliated ReS2, using a unique combination of optical pump-THz probe and broad-band transient absorption spectroscopy. Two distinct time regimes are identified, both of which are dominated by unbound charge carriers despite the high exciton binding energy. In the first time regime, the unbound charge carriers cause an increase and a broadening of the exciton absorption band. In the second time regime, a peculiar narrowing of the excitonic absorption profile is observed, which we assign to the presence of built-in fields and/or charged defects. Our results pave the way to analyze spectrally complex transient absorption measurements on layered TMD materials and indicate the potential for ReS2 to produce mobile free charge carriers, a feat relevant for photovoltaic applications.

@en

We studied the dynamics of transfer of photoexcited electronic states in a bilayer of the two-dimensional transition metal dichalcogenide ReS2 and tetracene, with the aim to produce triplets in the latter. This material combination was used as the band gap of ReS2 (1.5 eV) is slightly larger than the triplet energy of tetracene (1.25 eV). Using time-resolved optical absorption spectroscopy, transfer of photoexcited states from ReS2 to triplet states in tetracene was found to occur within 5 ps with an efficiency near 38%. This result opens up new possibilities for heterostructure design of two-dimensional materials with suitable organics to produce long-lived triplets. Triplets are of interest as sensitizers in a wide variety of applications including optoelectronics, photovoltaics, photocatalysis, and photon upconversion.

@en

To improve the stability and carrier mobility of quantum dot (QD) optoelectronic devices, encapsulation or pore infilling processes are advantageous. Atomic layer deposition (ALD) is an ideal technique to infill and overcoat QD films, as it provides excellent control over film growth at the sub-nanometer scale and results in conformal coatings with mild processing conditions. Different thicknesses of crystalline ZnO films deposited on InP QD films are studied with spectrophotometry and time-resolved microwave conductivity measurements. High carrier mobilities of 4 cm² (V s)⁻¹ and charge separation between the QDs and ZnO are observed. Furthermore, the results confirm that the stability of QD thin films is strongly improved when the inorganic ALD coating is applied. Finally, proof-of-concept photovoltaic devices of InP QD films are demonstrated with an ALD-grown ZnO electron extraction layer.

@en

Carrier multiplication (CM) generates multiple electron-hole pairs in a semiconductor from a single absorbed photon with energy exceeding twice the band gap. Thus, CM provides a promising way to circumvent the Shockley-Queisser limit of solar cells. The ideal material for CM should have significant overlap with the solar spectrum and should be able to fully utilize the excess energy above the band gap for additional charge carrier generation. We report efficient CM in mixed Sn/Pb halide perovskites (band gap of 1.28 eV) with onset just above twice the band gap. The CM rate outcompetes the carrier cooling process leading to efficient CM with a quantum yield of 2 for photoexcitation at 2.8 times the band gap. Such efficient CM characteristics add to the many advantageous properties of mixed Sn/Pb metal halide perovskites for photovoltaic applications.

@en

Colloidal quantum dots (QDs) allow great flexibility in the design of optoelectronic devices, thanks to their size-dependent optical and electronic properties and the possibility to fabricate thin films with solution-based processing. In particular, in QD-based heterojunctions, the band gap of both components can be controlled by varying the size of the QDs. However, control over the band alignment between the two materials is required to tune the dynamics of carrier transfer across a heterostructure. We demonstrate that ligand exchange strategies can be used to control the band alignment of PbSe and CdSe QDs in a mixed QD solid, shifting it from a type-I to a type-II alignment. The change in alignment is observed in both spectroelectrochemical and transient absorption measurements, leading to a change in the energy of the conduction band edges in the two materials and in the direction of electron transfer upon photoexcitation. Our work demonstrates the possibility to tune the band offset of QD heterostructures via control of the chemical species passivating the QD surface, allowing full control over the energetics of the heterostructure without requiring changes in the QD composition.

@en

In transient absorption (TA) measurements on Cd-chalcogenide quantum dots (QDs), the presence of a band-edge (BE) bleach signal is commonly attributed entirely to conduction-band electrons in the 1S(e) state, neglecting contributions from BE holes. While this has been the accepted view for more than 20 years, and has often been used to distinguish electron and hole kinetics, the reason for the absence of a hole contribution to the BE-bleach has remained unclear. Here, we show with three independent experiments that holes do in fact have a significant impact on the BE-bleach of well-passivated Cd-chalcogenide QD samples. Transient absorption experiments on high photoluminescence quantum yield CdSe/CdS/ZnS core-shell-shell QDs clearly show an increase of the band-edge bleach as holes cool down to the band edge. The relative contribution of electron-to-hole bleach is 2:1, as predicted by theory. The same measurements on core-only CdSe QDs with a lower quantum yield do not show a contribution of holes to the band-edge bleach. We assign the lack of hole bleach to the presence of ultrafast hole trapping in samples with insufficient passivation of the QD surface. In addition, we show measurements of optical gain in core-shell-shell QD solutions, providing clear evidence of a significant hole contribution to the BE transient absorption signal. Finally, we present spectroelectrochemical measurements on CdTe QDs films, showing the presence of a BE-bleach for both electron and hole injections. The presence of a contribution of holes to the bleach in passivated Cd-chalcogenides QDs bears important implications for quantitative studies on optical gain as well as for TA determinations of carrier dynamics.

@en

Solution-processable two-dimensional (2D) semiconductors with chemically tunable thickness and associated tunable band gaps are highly promising materials for ultrathin optoelectronics. Here, the properties of free charge carriers and excitons in 2D PbS nanosheets of different thickness are investigated by means of optical pump-terahertz probe spectroscopy. By analyzing the frequency-dependent THz response, a large quantum yield of excitons is found. The scattering time of free charge carriers increases with nanosheet thickness, which is ascribed to reduced effects of surface defects and ligands in thicker nanosheets. The data discussed provide values for the DC mobility in the range 550-1000 cm² V^-1 s^-1 for PbS nanosheets with thicknesses ranging from 4 to 16 nm. Results underpin the suitability of colloidal 2D PbS nanosheets for optoelectronic applications.

@en

Thermalization losses limit the photon-to-power conversion of solar cells at the high-energy side of the solar spectrum, as electrons quickly lose their energy relaxing to the band edge. Hot-electron transfer could reduce these losses. Here, we demonstrate fast and efficient hot-electron transfer between lead selenide and cadmium selenide quantum dots assembled in a quantum-dot heterojunction solid. In this system, the energy structure of the absorber material and of the electron extracting material can be easily tuned via a variation of quantum-dot size, allowing us to tailor the energetics of the transfer process for device applications. The efficiency of the transfer process increases with excitation energy as a result of the more favorable competition between hot-electron transfer and electron cooling. The experimental picture is supported by time-domain density functional theory calculations, showing that electron density is transferred from lead selenide to cadmium selenide quantum dots on the sub-picosecond timescale.

@en

All-printed transistors consisting of interconnected networks of various types of twodimensional nanosheets are an important goal in nanoscience. Using electrolytic gating, we demonstrate all-printed, vertically stacked transistors with graphene source, drain, and gate electrodes, a transition metal dichalcogenide channel, and a boron nitride (BN) separator, all formed from nanosheet networks.The BN network contains an ionic liquid within its porous interior that allows electrolytic gating in a solid-like structure. Nanosheet network channels display on:off ratios of up to 600, transconductances exceeding 5 millisiemens, and mobilities of >0.1 square centimeters per volt per second. Unusually, the on-currents scaled with network thickness and volumetric capacitance. In contrast to other devices with comparable mobility, large capacitances, while hindering switching speeds, allow these devices to carry higher currents at relatively low drive voltages.

@en

We functionalize PbS nanocrystals with the organic semiconductor Zn β-tetraaminophthalocyanine to design a nanostructured solid-state material with frequent organic–inorganic interfaces. By transient absorption and fluorescence spectroscopy, we investigate the optoelectronic response of this hybrid material under near-infrared excitation to find efficient charge transfer from the nanocrystals to the molecules. We demonstrate that the material undergoes cooperative sensitization of two nanocrystals followed by photon upconversion and singlet emission of the organic semiconductor. The upconversion efficiency resembles that of comparable systems in solution, which we attribute to the large amount of interfaces present in this solid-state film. We anticipate that this synthetic strategy has great prospects for increasing the open-circuit voltage in PbS nanocrystal-based solar cells.

@en

Stability of quantum dot (QD) films is an issue of concern for applications in devices such as solar cells, LEDs, and transistors. This paper analyzes and optimizes the passivation of such QD films using gas-phase deposition, resulting in enhanced stability. Crucially, we deposited alumina at economically attractive conditions, room temperature and atmospheric pressure, on (1,2-ethanediamine) capped PbSe QD films using an approach based on atomic layer deposition (ALD), with trimethylaluminum (TMA) and water as precursors. We performed coating experiments from 1 to 25 cycles on the QD films, finding that alumina formed from the first exposure of TMA. X-ray photoelectron spectroscopy points to the presence of oxygen-rich compounds on the bare QD films, most likely from entrapped solvent molecules during the assembly of the QD films. These oxygenated compounds and the amine groups of the organic ligands react with TMA in the first cycle, resulting in a fast growth of alumina. Using 10 cycles resulted in a QD film that was optically stable for at least 27 days. Depositing alumina at ambient conditions is preferred, since the production of the QD films is also carried out at room temperature and atmospheric pressure, allowing combination of both processes in a single go.

@en

The implementation of next generation ultrathin electronics by applying highly promising dimensionality-dependent physical properties of two-dimensional (2D) semiconductors is ever increasing. In this context, the van der Waals layered semiconductor InSe has proven its potential as photodetecting material with high charge carrier mobility. We have determined the photogeneration charge carrier quantum yield and mobility in atomically thin colloidal InSe nanosheets (inorganic layer thickness 0.8-1.7 nm, mono/double-layers, ≤ 5 nm including ligands) by ultrafast transient terahertz (THz) spectroscopy. A near unity quantum yield of free charge carriers is determined for low photoexcitation density. The charge carrier quantum yield decreases at higher excitation density due to recombination of electrons and holes, leading to the formation of neutral excitons. In the THz frequency domain, we probe a charge mobility as high as 20 ± 2 cm²/(V s). The THz mobility is similar to field-effect transistor mobilities extracted from unmodified exfoliated thin InSe devices. The current work provides the first results on charge carrier dynamics in ultrathin colloidal InSe nanosheets.

@en