Guaranteeing high-quality test solutions for Spin-Transfer Torque Magnetic RAM (STT-MRAM) is a must to speed up its high-volume production. A high test quality requires maximizing the fault coverage. Detecting permanent faults is relatively simple compared to intermittent faults; the latter are faults (caused by non-environmental conditions) that appear and disappear as a function of time, and are therefore hard to detect. Testing for such faults in STT-MRAMs is even worse considering the Magnetic Tunneling Junction inherent property ‘intrinsic switching stochasticity’, which results in inevitable random write errors. This paper presents a novel Design-for-Testability (DFT) scheme for detecting intermittent faults in STT-MRAMs; it is based on monitoring the write current. The strength of the write current is inversely correlated to the write error rate; when the write current is smaller than the specification, the device is considered faulty. A reduction in the write current can be caused by any defect in the write path of the memory (e.g., interconnects and contacts). Simulation results based on industrial design show that applying DFT yields a superior coverage of intermittent faults compared to functional test methods, such as march tests.@en

While magnetic solid-state memory has found commercial applications to date, magnetic logic has rather remained on a conceptual level so far. Here, we discuss open challenges of different spintronic logic approaches, which use magnetic excitations for computation. While different logic gate designs have been proposed and proof of concept experiments have been reported, no nontrivial operational spintronic circuit has been demonstrated due to many open challenges in spintronic circuit and system design. Furthermore, the integration of spintronic circuits in CMOS systems will require the usage of transducers between the electric (CMOS) and magnetic domains. We show that these transducers can limit the performance as well as the energy consumption of hybrid CMOS-spintronic systems. Hence, the optimization of transducer efficiency will be a major step towards competitive spintronic logic system.

@en

Spin-Transfer Torque Magnetic RAMs (STT-MRAMs) are on their way to commercialization. However, obtaining high-quality test and diagnosis solutions for STT-MRAMs is challenging due to the existence of unique defects in Magnetic Tunneling Junctions (MTJs). Recently, the Device-Aware Test (DA-Test) method has been put forward as an effective approach mainly for detecting unique defecting STT-MRAMs. In this study, we propose a further advancement based on the DA-Test framework, introducing the Device-Aware Diagnosis (DA-Diagnosis) method. This method comprises two steps: a) defining distinctive features of each unique defect by characterization and physical analysis of defective MTJs, and b) utilizing march algorithms to extract distinctive features. The effectiveness of the proposed approach is validated in an industrial setting with real devices and data measurement.

@en

The development of Spin-Transfer Torque Magnetic RAMs (STT-MRAMs) mass production requires high-quality test solutions. Accurate and appropriate fault modeling is crucial for the realization of such solutions. This paper targets fault modeling and test generation for all interconnect and contact defects in STT-MRAMs and shows that using the defect injection and circuit simulation for fault modeling without incorporating the impact of magnetic coupling will result in an incomplete set of fault models; hence, not obtaining accurate fault models. Magnetic coupling introduced by the stray field is an inherent property of STT-MRAMs and may foster the occurrence of additional memory faults. Not considering the magnetic coupling clearly will give rise to test escapes. The paper introduces a compact model for STT-MRAM that incorporates the intra- and inter-cell stray field, uses this model to derive the full set of fault models for interconnect and contact defects, and finally proposes an efficient test solution.

@en

The development of Spin-transfer torque magnetic RAM (STT-MRAM) mass production requires high-quality dedicated test solutions, for which understanding and modeling of manufacturing defects of the magnetic tunnel junction (MTJ) is crucial. This paper introduces and characterizes a new defect called Back-Hopping (BH); it also provides its fault models and test solutions. The BH defect causes MTJ state to oscillate during write operations, leading to write failures. The characterization of the defect is carried out based on manufactured MTJ devices. Due to the observed non-linear characteristics, the BH defect cannot be modelled with a linear resistance. Hence, device-aware defect modeling is applied by considering the intrinsic physical mechanisms; the model is then calibrated based on measurement data. Thereafter, the fault modeling and analysis is performed based on circuit-level simulations; new fault primitives/models are derived. These accurately describe the way the STT-MRAM behaves in the presence of BH defect. Finally, dedicated march test and a Design-for-Test solutions are proposed.

@en

The STT-MRAM manufacturing process involves not only traditional CMOS process steps, but also the integration of magnetic tunnel junction (MTJ) devices, the data-storing elements. This paper demonstrates a paradigm shift in fault modeling for STT-MRAMs by performing defect modeling and fault analysis for MTJ pinhole defects which are seen as a key type of STT-MRAM manufacturing defects. A Verilog-A compact model for defect-free MTJ devices is built and calibrated with electrical measurements on actual MTJ wafers. MTJs with a pinhole defect are extensively characterized, both during manufacturing test (t=0) and in the field (t>0), and the data is used to extend our defect-free MTJ compact model to include parameterized pinhole defects. The model is then used to perform single-cell static fault analysis and this shows not only what kind of faults can occur in an STT-MRAM, but also that the conventional fault modeling approach based on linear resistors cannot catch such behavior.@en

We report on the epitaxial growth and the characterization of thin FePt films and the subsequent patterning of magnetic lattice structures. These structures can be used to trap ultracold atoms for quantum simulation experiments. We use molecular beam epitaxy to deposit monocrystalline FePt films with a thickness of 50 nm. The films are characterized with X-ray scattering and Mössbauer spectroscopy to determine the long range order parameter and the hard magnetic axes. A high monocrystalline fraction was measured as well as a strong remanent magnetization of M = 900 kA/m and coercivity of 0.4 T. Using electron beam lithography and argon ion milling, we create lattice patterns with a period down to 200 nm, and a resolution of 30 nm. The resulting lattices are imaged in a scanning electron microscope in the cross-section created by a focused ion beam. A lattice with continuously varying lattice constant ranging from 5 μm down to 250 nm has been created to show the wide range of length scales that can now be created with this technique.

@en