M.C.R. Fieback
Please Note
64 records found
1
Resistive Random Access Memory (RRAM) has emerged as a promising candidate to succeed conventional memory technologies, offering advantages such as low energy operation and scalable storage density. As different manufacturers continue to advance RRAM toward large-scale production and commercial deployment, the demand for accurate and efficient testing methodologies becomes increasingly critical. This paper investigates interconnect and contact defects in RRAM arrays, with particular attention to the influence of the Data Background (DB), and proposes corresponding test strategies. A comprehensive defect space covering interconnect and contact defects is formulated for a layout-independent RRAM design. Systematic defect injection and circuit-level simulations are conducted to derive fault models, encompassing not only single-cell and two-cell coupling faults but also multi-cell faults strongly affected by DBs. The analysis identifies previously unreported 3-cell and 4-cell faults, which originate from defect-related sneak paths in the array. Conventional RRAM test schemes are unable to detect such faults. To address this limitation, a DB-aware test generation scheme is presented, capable of efficiently identifying all the aforementioned fault types and thereby enhancing the overall fault and defect coverage in RRAM devices.
A Data-Driven ANN-Based Model for FeCAP and FeFET
Orienting to SPICE and Circuit Design
Physics-based compact models for emerging non-volatile memories (NVMs) are often limited by the complex interactions of microscopic domains and defects that are difficult to capture analytically, resulting in reduced accuracy and simulation efficiency. To address this challenge, a machine learning (ML)-based approach is proposed using artificial neural networks (ANNs) trained entirely on device measurement data, enabling a direct translation of fabrication characteristics into SPICE-compatible circuit models. The resulting models achieve high accuracy (MSE: 0.724, adjusted R2 : 0.998), significantly outperforming physics-based baselines with an 18× lower MSE for polarization and a two-order-of-magnitude precision improvement in FeFET current simulation, while accurately capturing the wake-up process. Furthermore, the model demonstrates robust out-of-distribution (OOD) extrapolation to unseen ferroelectric thicknesses and a 33.7% improvement in simulation speed. These results validate the ML-based approach as a highly efficient, SPICE-compatible solution for next-generation memory.
Ion Depletion Defects in RRAMs
Characterization, Modeling and Test
The commercialization of resistive random access memories (RRAMs) has been invested in by many companies as an alternative to conventional memories. This necessitates a thorough comprehension of manufacturing defects to create high-quality, efficient test and diagnosis solutions that will facilitate high-volume production. This work presents the identification and characterization of a novel defect, called ion depletion (ID), utilizing silicon measurements. In the selected defective device, after excluding the first 100 unstable cycles, 14% of the remaining 836 cycles exhibit ID-defective high resistance state (HRS) degradation, while the low resistance state (LRS) remains unaffected. Furthermore, this unique defect is non-linear and inside the device itself; hence, the conventional defect and fault modeling, which relies on linear resistors beside the device, cannot be applied to model the ID defect. To tackle this issue, the device-aware (DA) defect modeling approach is used. A calibrated RRAM model representing the defective device is developed using measurement data to precisely characterize how the defect influences the electrical properties of the memory hardware. Subsequently, fault analysis is conducted based on the DA defect model, leading to the introduction of suitable fault models. These models demonstrate that the ID defect can trigger undefined state faults. Finally, dedicated test and diagnosis solutions specifically designed for the ID defect are proposed.
Memristor-based neural network accelerators for space applications
Enhancing performance with temporal averaging and SIRENs
Although offering great potential for energy-efficient edge-AI, memristor-based CIM accelerators are severely hindered by IR drop induced errors. To tackle this, we propose a low-cost mitigation technique by first quantifying the impact of IR drop on the accuracy. Then, a mitigation strategy is developed to compensate for IR drop-induced inference accuracy reduction by combining an optimized mapping scheme with a fine-tuned calibration of the ADC. Results show the proposed solution can effectively mitigate IR drop with a negligible overhead.
Vector–matrix multiplication (VMM), implemented through multiply–accumulate (MAC) operations, represents the dominant computational primitive in many artificial intelligence (AI) workloads. When executed on conventional von Neumann architectures, VMM operations suffer from important energy consumption and latency due to the separation between memory and processing units. To overcome these limitations, crossbar arrays built from Resistive Random Access Memory (RRAM) cells have been proposed for accelerating VMM computations. In this work, we investigate the key optimization trade-offs associated with implementing RRAM-based neural networks for classification applications. A simple two-layer neural network is first defined and trained in software to generate the weight matrices and bias parameters. Next, three hardware implementation scenarios are evaluated depending on whether negative floating-point numbers are used: Positive Weights Only (PWO), Positive and Negative Weights Only (PNWO), and Positive and Negative Weights with Biases (PNWB). The different implementations are analyzed at the hardware level by examining classification accuracy, energy efficiency, latency, and area overhead. The study further incorporates important RRAM limitations, including restricted conductance range and device variability. Hardware results show that the PWO scenario offers the lowest energy consumption (189 fJ/MAC) and area overhead but results in the lowest accuracy. PNWO and PNWB significantly improve accuracy (+177% and +180%) but increase energy consumption (+63% and +87%) and area (×2 and ×2.1). Under variability effects, PWO achieves better accuracy (94.65%), followed by PNWO (93.11%) and PNWB (92.11%).
RRAM-based compute-in-memory (CIM) AI accelerators integrate memory cells with mixed-signal peripherals to enable energy-efficient, low-latency edge computing. These architectures require novel test techniques for unique electrical defects. Current system-level functional tests cannot guarantee defect-free circuits, while accurate circuit-level techniques remain non-scalable to Deep Neural Networks (DNNs). To bridge this gap, we present the first structural test methodology for CIM DNNs, unifying system-level analysis with circuit-level precision. We accurately model RRAM crossbar defects to formulate test patterns, and then propagate results across layers for comprehensive structural testing. Generated test patterns are optimized either for 96% defect coverage or test time reduction by a factor of three while covering all unique defects and maintaining over 73% defect strength coverage.
Addressing non-idealities in Resistive Random Access Memories (RRAMs) is crucial for their successful commercialization. For example, the inherent resistance drift that occurs during consecutive read operations can induce Read Disturb Faults (RDF), leading to functional errors. This paper analyzes and characterizes the resistance drift and the RDF based on data measurements and presents a physics-based RRAM compact model that incorporates these non-idealities. Additionally, an in-field mitigation scheme is proposed, leveraging bidirectional read operations to balance the resistance. The scheme is implemented and validated through circuit simulations, both for RRAM used as memory and for RRAM-based computation-in-memory microarchitectures for deep neural networks. The results demonstrate that RRAM without any mitigation scheme can start failing after 8,000 consecutive reads, while our mitigation scheme ensures that the memory remains functional even after 106 consecutive reads. Furthermore, the results indicate that using the MNIST dataset as a case study, the accuracy can drop significantly from 86% to as low as 12.5% without any mitigation scheme. In contrast, the proposed mitigation scheme improves this accuracy up to 84.2%.
Resistive Random-Access Memories (ReRAMs) represent a promising candidate to complement and/or replace CMOS-based memories adopted in several emerging applications. Despite all their advantages – mainly CMOS process compatibility, zero standby power, and high scalability and density – the use of ReRAMs in real applications depends on guaranteeing their quality after manufacturing. As observed in CMOS-based memories, ReRAMs are also susceptible to manufacturing deviations, including defects and process variations, that can cause faulty behaviors different from those observed in CMOS technology, increasing not only the manufacturing test complexity but also the time required to perform the test. In this context, this paper proposes to study the use of temperature to facilitate fault propagation in ReRAMs, reducing the required test time. A case study composed of a 3x3 word-based ReRAM with peripheral circuitry implemented based on a 130 nm Predictive Technology Model (PTM) library was adopted. During the proposed study, a total of 17 defects were injected in different positions of the ReRAM cell, and their respective faulty behavior was classified into conventional and unique faults, considering three different temperatures (25, 100, and -40 °C). The obtained results show that the temperature can, depending on the position of the defect, facilitate fault propagation, which reduces the time required for performing manufacturing testing.
Resistive RAM (RRAM) design optimization and error monitoring is crucial for memory storage applications but also to enable future brain-inspired systems beyond the capabilities of today’s hardware. The figure-of-merit confirming the presence of resistive switching in RRAM devices is its resistance window expressed by the HRS/LRS ratio (High Resistance State over the Low Resistance State). This ratio guarantees the proper operation of the RRAM: the larger the ratio, the more reliable and robust the RRAM cell becomes in storing and retrieving data. From this perspective, this paper proposes an analysis of RRAM intermittent errors with respect to the RRAM resistance ratio. The impact of intermittent errors on the HRS/LRS ratio is analyzed at the RRAM cell electrical level using a dedicated test chip. Silicon measurements show that all detected RRAM intermittent errors directly result from resistance drifts due to ineffective programming operations. In view of these findings, intermittent error mitigation schemes are proposed to address these errors at the circuit level.
While Resistive RRAM (RRAM) provides appealing features for artificial neural networks (NN) such as low power operation and high density, its conductance variation can pose significant challenges for synaptic weight storage. This paper reports an experimental evaluation of the conductance variations of manufactured RRAMs memory cells at the memory array level. Variability is evaluated with respect to the RRAM low resistance state (LRS) and high resistance state (HRS) conductance ratio. This ratio is selected as the parameter of interest as it guarantees the proper operation of the RRAM: the larger the ratio, the more reliable and robust the RRAM cell is in storing and retrieving data. The measurement results show that conductance ratio is significantly influenced by variability. Using these findings, the performance of an artificial neural network that uses individual RRAM cells for synaptic weight storage is evaluated in relation to conductance variability. It is shown that RRAM variability can heavily affect the network behavior, resulting in a substantial decrease in the classification accuracy during inference.
European Test Symposium Teams
An Anniversary Snapshot
The IEEE European Test Symposium (ETS) has been facilitating progress in electronic systems testing since its launch in 1996. On the occasion of its 30th anniversary, this collaborative paper gathers sections by 21 ETS teams to outline their influential ideas and milestones. Each team's section highlights historical perspective, current research, frameworks and projects as well as forward-looking research agendas in the area of electronic-based circuits and systems testing, reliability, safety, security and validation. This anniversary summary documents how research of various ETS teams, exemplifying the test community, has been evolving and transitioning from concepts to practical standards and Electronic Design Automation (EDA) tools and flows. This legacy is a strong base to drive the next generation of advances in electronic systems testing.
The development of Ferroelectric Field-Effect Transistor (FeFET) manufacturing requires high-quality test solutions, yet research on FeFET testing is still in a nascent stage. To generate a dedicated test method for FeFETs, it is critical to have a deep understanding of manufacturing defects and accurately model them. In this work, we introduce the unique defect, Anomalous Charge Trapping (ACT), in FeFETs. The ACT-defective FeFET is characterized, and the physical mechanism of the defect is explained. Then, we apply the Deviceaware Test (DAT) method to design a specific ACT-defective FeFET model, which includes the physical impact of the defect on the electrical parameters of defect-free models, and calibrate the model with measurement data. Fault modeling is performed based on circuit-level simulations, and dedicated test solutions are proposed.
Edge AI accelerators have revolutionized intelligent information processing, enabling applications, such as self-driving cars and low-power IoT devices. Design efforts prioritize computational power and energy efficiency. Nevertheless, testability is also critical for in-field, reliable operation, especially for novel architectures such as memristive, analog Computation-in-Memory (CIM) cores. These structures combine emerging Resistive Random Access Memory (RRAM) with CMOS peripherals to efficiently implement vector-matrix-multiplication (VMM) operations for inference. Current research on AI Accelerator testing relies on functional test patterns, derived from abstract and unrealistic fault models. This paper presents a novel structural testing methodology for CIM VMM circuits. The methodology utilizes device-level defect models and defines new fault models for CIM VMM. The resulting test patterns are optimized to maximize defect coverage and minimize test time, since they require only a single write operation per victim cell.
Resistive Random-Access Memories (ReRAMs) represent a promising candidate to complement and/or replace CMOS-based memories used in several emerging applications. Despite all the advantages of using these novel memories, mainly due to the memristive device's CMOS manufacturing process compatibility, zero standby power consumption, as well as, high scalability and density, the use of them in real applications depends on being able to guarantee their quality after manufacturing. As observed in CMOS-based memories, ReRAMs are also susceptible to manufacturing deviations, defects, and process variations, that can cause faulty behaviors different from the ones observed in CMOS technology, increasing not only the manufacturing test complexity but also the time required to perform the test. In this context, this paper proposes to study the use of temperature to facilitate fault propagation in ReRAMs, reducing the required test time. A case study composed of a 3x3 word-based ReRAM with peripheral circuitry implemented based on a 130 nm Predictive Technology Model (PTM) library was adopted. During the proposed study, a total of 17 defects were injected in different positions of the ReRAM cell, and their respective faulty behavior was classified into traditional and unique faults, considering three temperatures (25, 100, and -40°C). The obtained results show that the temperature can, depending on the position of the defect, facilitate fault propagation, which reduces the time required for performing manufacturing testing.
As emerging non-volatile memory (NVM) devices, Ferroelectric Field-Effect Transistors (FeFETs) present distinctive opportunities for the design of ultra-dense and low-leakage memory systems. For matured FeFET manufacturing, it is extremely important to have an understanding of manufacturing defects and accurately model them to develop effective test solutions. This paper introduces a comprehensive framework for defect and fault modeling, which enables the development of test solutions. First, a classification of FeFET manufacturing defects is provided; both conventional defects (such as contacts and interconnect defects) as well as unique FeFET defects are discussed. The latter FeFET specific defect leads to unique faults that cannot be adequately described using traditional modeling approaches. Then, the Device-Aware Test (DAT) method is used to effectively and appropriately model, analyze and develop test solutions for such unique defects; the approach will be illustrated for Stuck-at-Polarization (SAP) defects.
While Resistive RRAM (RRAM) offers attractive features for artificial neural networks (NN) such as low power operation and high-density, its conductance variation can pose significant challenges when the storage of synaptic weights is concerned. This paper reports an experimental evaluation of the conductance variations of manufactured RRAMs at the memory array level. Working at the memory array level allows to catch cycle-to-cycle (C2C) as well as device-to-device (D2D) variability and, hence, to propose a realistic evaluation of the conductance variation. Variability is evaluated with respect to the RRAM low resistance state (LRS) and high resistance state (HRS) conductance ratio. This ratio is selected as the parameter of interest as it guarantees the proper operation of the RRAM: the larger the ratio, the more reliable and robust the RRAM cell is in storing and retrieving data. The measurement results show that the conductance ratio is heavily affected by variability. Large spatial and temporal variations are reported, making challenging RRAM-based analog weight storage.