Tandem-L is a highly innovative SAR satellite mission for the global observation of dynamic processes on the Earth's surface with hitherto unknown quality and resolution. Thanks to its novel imaging techniques and its unprecedented acquisition capacity, Tandem-L will deliver urgently needed information for the solution of pressing scientific questions in the areas of the biosphere, geosphere, cryosphere and hydrosphere. The feasibility of Tandem-L has been analyzed and confirmed in the scope of a phase A study, which has been conducted in close cooperation between the German Aerospace Center (DLR) and the German space industry. This paper provides an overview of the Tandem-L mission concept and summarizes the actual development status.

@en

TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an innovative formation-flying radar mission that opens a new era in spaceborne radar remote sensing. The primary objective is the acquisition of a global digital elevation model (DEM) with unprecedented accuracy (12 m horizontal resolution and 2 m relative height accuracy). This goal is achieved by extending the TerraSAR-X synthetic aperture radar (SAR) mission by a second, TerraSAR-X like satellite (TDX) flying in close formation with TerraSAR-X (TSX). Both satellites form together a large single-pass SAR interferometer with the opportunity for flexible baseline selection. This enables the acquisition of highly accurate cross-track interferograms without the inherent accuracy limitations imposed by repeat-pass interferometry due to temporal decorrelation and atmospheric disturbances. Besides the primary goal of the mission, several secondary mission objectives based on along-track interferometry as well as new bistatic and multistatic SAR techniques have been defined, representing an important and innovative asset of the TanDEM-X mission. TanDEM-X is implemented in the framework of a public-private partnership between the German Aerospace Center (DLR) and EADS Astrium GmbH. The TanDEM-X satellite was successfully launched in June 2010 and the mission started its operational data acquisition in December 2010. This paper provides an overview of the TanDEM-X mission and summarizes its actual status and performance. Furthermore, results from several scientific radar experiments are presented that show the great potential of future formation-flying interferometric SAR missions to serve novel remote sensing applications.

@en

TanDEM-X (TerraSAR-X Add-on for Digital Elevation Measurements) is a high-resolution interferometric mission with the main goal of providing a global and unprecedentedly accurate digital elevation model of the Earth surface by means of single-pass X-band synthetic aperture radar (SAR) interferometry. Despite its usual quasi-monostatic configuration, TanDEM-X is the first genuinely bistatic SAR system in space. During its monostatic commissioning phase, the system has been mainly operated in pursuit monostatic mode. However, some pioneering bistatic SAR experiments with both satellites commanded in nonnominal modes have been conducted with the main purpose of validating the performance of both space and ground segments in very demanding scenarios. In particular, this letter reports about the first bistatic acquisition and the first single-pass interferometric (mono-/bistatic) acquisition with TanDEM-X, addressing their innovative aspects and focusing on the analysis of the experimental results. Even in the absence of essential synchronization and calibration information, bistatic images and interferograms with similar quality to pursuit monostatic have been obtained.

@en

This letter describes the first interferometric acquisitions and results obtained by the TerraSAR-X add-on for Digital Elevation Measurements mission. Due to the large along-track separation between the two satellites during the approaching maneuver and the Earth's rotation, useful interferometric acquisitions were only possible at high latitudes. This resulted in a crossing angle between the ground tracks whose impact was corrected by acquiring the two synthetic-aperture radar images with an opposite squint. The still very large 2-km cross-track baseline resulted in a 3.8-m interferometric height of ambiguity, producing extremely detailed images of the topography of the target area. Results acquired over the October Revolution Island, Russia, are shown and discussed.

@en

TanDEM-X is a high-resolution interferometric mission with the main goal of providing a global and unprecedentedly accurate digital elevation model (DEM) of the Earth surface by means of single-pass X-band SAR interferometry. Despite its usual quasi-monostatic configuration, TanDEM-X is the first genuinely bistatic SAR system in space. During its monostatic commissioning phase, the system has been mainly operated in pursuit monostatic mode. However, some pioneering bistatic SAR experiments with both satellites commanded in non-nominal modes have been conducted with the main purpose of testing the performance of both space and ground segments in very demanding scenarios. In particular, this paper reports about the first bistatic acquisition and the first single-pass interferometric (mono/bistatic) acquisition with TanDEM-X. Even in the absence of essential synchronisation and calibration information, bistatic images and interferogramswith similar quality to pursuit monostatic have been obtained.@en

This paper discusses cross-track SAR interferometry under crossing orbits. The underlaying theory is briefly outlined, showing that a crossing angle between the ground tracks needs to be compensated by applying different squint angles in order to have overlap in the the ground-spectral domain. Two sets of crossing orbits InSAR experiments are described. The results of the first experiment, are discussed.

@en