Circular Image

M. Turrin

info

Please Note

77 records found

Design exploration and assessment of the influence of the architectural form on the structural behavior

Journal article (2026) - Pooyan Kazemi, Alireza Entezami, Michela Turrin, Charalampos Andriotis, Stefano Mariani, Aldo Ghisi
Tall buildings with diagrids offer several advantages over alternative structural solutions, including the possibility of reducing the dimensions of interior cores and freeing up interior space. However, the interplay between structural systems and architectural form is not always adequately considered during the early stages of design to support quantitative decision-making. In this study, a database comprising 1000 tall buildings has been generated using parametric modeling. The buildings range in height from 140 to 300 meters. These buildings have then been subjected to seven ground motions selected from the NGA-West2 database, for a total of 7000 simulations. Data related to geometric, structural, and environmental variables will subsequently be processed to support investigations based on artificial intelligence-driven generative approaches aimed at producing alternative optimized solutions. In this paper, the data are described in terms of specific 22 input (10 architectural, 12 related to the ground motion) and 99 output (69 structural, 23 environmental, 7 geometry-dependent) features, demonstrating the extent to which the database has been expanded with respect to the original design space. The dataset is made available through a repository for the architecture, engineering, and construction community. ...
Journal article (2026) - Pooyan Kazemi, Michela Turrin, Charalampos Andriotis, Alireza Entezami, Stefano Mariani, Aldo Ghisi
Early-stage design optimisation of tall buildings has been studied for several decades through performance-based design, parametric modelling, evolutionary algorithms and, more recently, machine-learning surrogates. A remaining challenge, however, is the computationally efficient integration of seismic time-history simulation, architectural form generation, multi-response prediction and multi-objective design exploration within a single reproducible workflow. This issue is particularly relevant for diagrid tall buildings, where geometric transformations such as tapering, twisting and curvilinearity strongly affect structural response, material use and environmental indicators. This study proposes a surrogate-assisted framework for early-stage multi-objective seismic design optimisation of diagrid tall buildings. A database of 1000 parametric building configurations was generated and analysed under seven bidirectional ground-motion records, resulting in 7000 OpenSeesPy time-history simulations. The original 22 input variables were transformed into 45 preprocessed input columns through scaling, categorical encoding and conditional masking of geometry-dependent variables. A multi-input, multi-output feed-forward neural network was then trained to predict 91 responses, including 69 structural responses, 14 environmental and cost-related responses and 8 geometry-dependent quantities. The trained surrogate was coupled with NSGA-II to screen candidate designs using selected objectives related to acceleration, displacement, inter-storey drift, von Mises stress and total mass. Approximately 2000 surrogate-based optimisation evaluations were produced over 10 generations and reduced to 408 unique candidate geometries. The proposed framework does not replace final nonlinear finite-element verification; rather, it provides a computationally efficient decision-support tool for rapidly reducing a high-dimensional diagrid design space before detailed engineering assessment. ...
Conference paper (2026) - Eleni Chatzi Nestoros, Pablo Martinez-Alcaraz, Alejandro Fuentes, Juan Diego Blanco Cadena, Michela Turrin, Tiziana Poli, Alessandra Luna-Navarro
Urbanization and climate change have intensified urban heat island effects, significantly affecting outdoor thermal comfort (OTC) in cities. Traditional methods of assessing the influence of urban environments on OTC often rely heavily on computational simulations, neglecting the integration of user-centric data and comprehensive environmental monitoring. This study investigates the relationship between microclimatic conditions, thermal sensation, and human preferences to identify the key factors influencing outdoor thermal comfort. Using the Acquabella district in Milan as a case study, the research adopts a cross-examination approach that integrates qualitative and quantitative assessments to evaluate outdoor thermal conditions. The methodology combines user-centered participatory approaches, including a workshop and an online survey, to identify critical intervention areas and factors contributing to thermal discomfort. Thermal Sensation Votes (TSV) are collected and analyzed in QGIS, highlighting significant environmental and psychological factors influencing user perception. Preliminary simulations using SOLWEIG are employed to cross-examine the results, identifying spaces with varying levels of thermal comfort. This study underscores the value of combining objective and subjective measures to pinpoint areas of critical environmental quality and optimize decision-making processes. By leveraging user data, the methodology reduces computational demands while offering actionable insights for urban health. The approach is scalable to different urban contexts, fostering the development of resilient and climate-adaptive environments. ...
Book chapter (2025) - Y. Chen, M. Turrin
Group work has been used in design-related education programs to train students in handling the complexity of the design process in the built environment through co-operation. Education activities moved on-line when the COVID-19 pandemic started. Students have worked in groups remotely through digital platforms instead of face-to-face on campus. How did design education programs incorporating group work adapt to these changes during the pandemic, and how did the virtual environment influence the design process and outcomes of group work? This paper addresses these questions by examining two master education courses provided at the Faculty of Architecture and the Built Environment, Delft University of Technology. It explores how the group work can be managed online with higher exploitation of digital tools helping interaction and data sharing among group members. The conclusions highlight the distinction between content development via on-line education (and how it can meet certain standards) and the communication dynamics during group work (for example how vocal remarks, separated from body language and shared context, can impact the quality and effectiveness of online group interactions). These findings underscore the importance of considering both aspects when developing group work for online education. ...
Journal article (2025) - G. Fratoni, M.J. Tenpierik, M. Turrin, M. Garai, D. D’Orazio
Sound-absorbing barriers and screens are commonly employed to mitigate one of the most annoying noises in workplaces: intelligible speech. However, isolating their acoustic contribution from all the other elements (ceilings, wall treatment, or carpets) is challenging. This study uses a wave-based room acoustic modeling approach to explore the acoustic function of desk screens in a virtually reconstructed open-plan office. Analytical models, finite-element simulations, and experimental data from 3D-printed samples allowed defining a multi-resonator unit cell, attenuating the voice signal's main formants. The sound-absorbing panels composed of the unit modules iteration are assessed in the full-scale digital model, starting from the calibrated version on in-field measurements. The wave-based engine employed in this study grants the crucial aspect of computing the acoustic performance of the potential multi-resonator screens, including the edge diffraction due to their desk installation. In the virtual workplace, the acoustic role of such screens in increasing the speech level decay is outlined in comparison with the calibrated scenario and the traditional screens' option. ...
The growing population of people living with dementia demands innovative architectural solutions that prioritize wellbeing. Floor layouts significantly affect the quality of life for people living with dementia, but the nuances of perceived user experience remain a challenging criterion to evaluate during the early design stages. Visual sightlines are one of the key aspects for dementia-inclusive design where machine learning (ML) provides decision-support means to validate early-stage designs. In this study, an isovist-based quantification scheme is proposed to capture visual access data to evaluate the extent of compliance of floor layouts with respect to dementia design principles (DDP). The visual access quality labels are determined by the number of isovists that satisfy the visual access requirement for their respective DDPs, thereby ensuring a consistent and objective measurement of visual access. 18 unique spatial features were tested using feature filtering methods to predict visual access quality labels. The framework bridges qualitative design principles with quantitative methods, introducing a scalable approach for evaluating visual access in the context of dementia-friendly design. The ML model was evaluated using individual class output and multi-output evaluation metrics based on 7 feature inputs and 2 class outputs, achieving 84–87% accuracy on an individual class and 72% on the subset accuracy metric. The results suggest a viable pathway for developing ML support tools to provide feedback on DDP compliance at an early design stage. ...

A Parametric Approach for Tall Buildings with Outer Diagrids

Book chapter (2025) - Pooyan Kazemi, Michela Turrin, Charalampos Andriotis, Alireza Entezami, Stefano Mariani, Aldo Ghisi
This paper presents a comprehensive computational workflow to generate, evaluate, and compare different outer diagrid designs for tall buildings, focusing on their structural efficiency under various load conditions, including seismic actions. Such diagrid systems not only enhance both structural resilience and architectural flexibility but also provide primary resistance to lateral loads, allowing for smaller internal core structures. Despite their advantages, widely used architectural design software, such as Grasshopper®, offer limited support for the seismic simulations essential for such complex structures. To address this limitation, a novel integration of the Alpaca4d plug-in, based on OpenSees software, is developed to facilitate seismic simulations for architects and engineers. The methodology generates a diverse dataset of tall buildings by varying critical design parameters, including the geometries of the top and bottom floors, floor heights, and vertical transformations such as tapering or twisting. From over 61,200 theoretical combinations, the Latin hypercube sampling technique is adopted to select 1000 models to ensure a representative diversity. Each model is subject to cross-section optimisation based on Eurocode load combinations, incorporating both permanent and live loads according to code specifications. Dynamic analyses are then performed under seven ground motions selected from the PEER NGA-West2 database, to capture structural responses under realistic conditions. The computational workflow generates key outputs, including inter-storey drifts, base reaction forces and moments, and acceleration distributions, recorded at critical nodes and elements to optimise data collection and computational efficiency. These outputs provide a detailed understanding of the seismic performance of each model and serve as the basis for further structural/materials optimization. By leveraging these results, the workflow will support in the future early decision-making in structural and architectural design, also in view of the progresses in the artificial intelligence field. Overall, this approach offers a streamlined and adaptable method for systematically evaluating and optimising the seismic design of tall buildings for architectural design. ...
Conference paper (2024) - L.-M. Mueller, C. Andriotis, M. Turrin
Generative Artificial Intelligence (AI) promises to make a vast impact across disciplines, including transforming the architectural design process by autonomously generating full building geometries. One form of generative deep learning that has been used to create 2D and 3D representations of objects is Generative Adversarial Networks (GANs). Existing literature, however, has limited applications that utilize 3D data for building geometry generation, with previous studies focused on low-scale 3D geometries suitable for objects such as chairs or cars. This paper develops a new GAN architecture to produce high-resolution feasible building geometry. The training dataset used is a selection of 3D models of single-family homes from an existing database, pre-processed for the specific application. State-of-the-art GAN models are initially tested to establish baseline performance and applicability potential. Then, a systematic study is performed to identify the structure and hyperparameters necessary to successfully fit a GAN to this design task. The successful architecture, named 3DBuildingGAN, uses a combination of Wasserstein loss with gradient penalty, leaky rectified linear units for neuron activation in the generator and the critic, and the root mean squared propagation optimizer with a fixed learning rate. The proposed model generates outputs similar in size, shape, and proportion to the training data with minimal noise in the output. Evaluation of memorization properties indicates open research directions, such as incorporating memorization rejection and training on larger data sets. Finally, the study reflects on how AI algorithms can reshape creativity through data-driven design solutions. ...
Optimizing the layout of residential buildings based on daylight performance and view quality is crucial to visual comfort and well-being of building occupants. Machine Learning (ML) methods offer valuable support for performance-based decision-making process at the early-stage building design. In this study, a novel workflow is introduced to integrate ML models into the architectural design process. With the designer’s input floor layout designs, the presented multimodal ML model predicts daylight provision and view quality, which are then translated into practical visual representations by a post-processing step. This approach allows input designs to be evaluated by the ML model, leading to enhanced design decisions while preserving the designer’s autonomy. Results for the best-performing model, implementing ResNet50 and a fully connected network, led to a Mean Square Error (MSE) of 0.0440 and 0.0478, and an R2 score of 0.7411 and 0.7815 for the daylight and view metrics, respectively. The results of the daylight and view predictive models are further interpreted according to different apartment categories and at various resolutions. These results indicate that the method could be viable for predicting daylight provision and view quality in early design tools, providing designers with faster feedback that supports informed decision-making during design iterations. Ultimately, the challenges of the study and further improvements are discussed. ...
Given the urgent sustainability goals, the construction industry is actively seeking renewable and recyclable biobased materials. In this research, cellulose and lignin, the most abundant biopolymers on earth, were studied as fundamental building blocks to create an innovative bio-based material to 3D print elements for the construction industry. Having obtained a 3D printable paste, the study presented in this paper delved into the 3D printing possibilities by using a clay extruder mounted on a robotic arm. A window frame was used as test case, addressing the existing gap in replacing or enhancing current window frames. To better understand the printing process and explore various geometric configurations, a section of a window frame was printed as proof of the concept. ...
Conference paper (2024) - L.-M. Mueller, C. Andriotis, M. Turrin
It is now within reach to use generative artificial intelligence (AI) to autonomously generate full building geometries. However, existing literature utilizing 3D data has focused to a limited degree on architecture and engineering disciplines. A critical first step to expanding the use of generative deep learning models in generative design research is making training data available. This study investigates 3D building model data characteristics that make it suitable for generative AI applications. Key data set attributes are identified through a systematic review of the object-containing datasets currently used to train state-of-the-art 3D GANs. These requirements are then compared to attributes of existing available building datasets. This comparison shows that publicly available data sets of 3D building models lack essential characteristics for generative deep learning. Features that make these building models inadequate for the task include but are not limited to, their mesh formats, low resolution and levels of detail, and inclusion of irrelevant geometry. To achieve the desired properties in this work, necessary transformations of the data are incorporated into a tailored preprocessing pipeline. The pipeline is applied to an existing dataset that contains 3D models of single-family homes. The transformed dataset is tested within state-of-the-art GAN models to assess training performance and document future data requirements for applying deep generative design to buildings. Our experiments show promise for the impact that architectural datasets can make on deep learning applications within the discipline. It also highlights the need for additional 3D building model data to increase the diversity and robustness of new designs. ...
Journal article (2023) - Miktha Farid Alkadri, Francesco De Luca, Michela Turrin, Muhammad Rafif Cahyadi Agung
This study proposes a novel method of solar geometry by considering the potential application of point cloud data combined with the simulation of solar radiation. With the support of geometric and radiometric information stored in the point cloud such as position information (XYZ) color information (RGB), and reflection intensity (I), architects may compensate for missing information on the existing context during the simulation, especially due to the limited capacity of current 3D modelling sites. However, the dataset often comes in the format of unstructured point cloud data retrieved from merged data scans and as a result, the radiometric information is difficult to occupy due to multiple reference points. Through a 3D subtractive procedure, this study not only examines volumetric samples of the three-dimensional matrix that fulfills the criteria of solar envelopes but also finds the optimal values of the merged data scan for input of solar radiation. In this regard, simulation of solar radiation contributes to identifying the most and the least exposed areas to the sun in existing contexts. This provides information related to visible sun hours that can be used to perform ray tracing analysis between the proposed 3D plot and surrounding contexts. Our proposed method ultimately helps architects not only generate solar geometry based on real contextual settings but also to understand comprehensively the microclimate conditions of the design context. ...
CAAD Futures is a biennial international conference on Computer-Aided Architectural Design under the umbrella of the CAAD Futures Foundation, and it is active world-wide in advancing and documenting related research. On 5–7 July 2023, the 20th CAAD Futures conference was hosted at Delft University of Technology. The CAAD Futures Foundation was established in 1985, holding the first conference on 18–19 September of that year at the very same University. The return of the conference to Delft for its 20thedition offered a chance to reflect on the past, present and future role of Computation in Architecture and the Built Environment. With reference to the theme of “INTERCONNECTIONS: Co-computing beyond boundaries”, CAAD Futures 2023 reflected on the role of computation to interconnect in and for Architectural Design. ...

Potential and limitation to 3D print building elements with cellulose & lignin

Under urgent sustainability targets, the building industry craves for renewable and recyclable biomaterials as cellulose is a fiber; Lignin is a plant-derived low-cost polymer with remarkable properties, yet its valorization is in its infancy. Recent studies have shown potentials to combine cellulose and lignin into a renewable bio-based material for the built environment, with the use of additive manufacturing to allow geometric customization and local control of material. However, previous studies also highlighted crucial issues to be solved. One main challenge is the lack of knowledge on combinations of lignin and cellulose with different binders to achieve a paste suitable for 3D printing, leading to a material applicable in the built environment. To contribute overcoming the challenge, this research aimed to explore various combinations of cellulose, lignin, and binders and to study the extrudability of the resulting paste using a clay extruder installed on a robotic arm. Several combinations were explored, evaluated, and compared. The four recipes with the highest scores were used to produce samples for tensile and three-point bending tests, water absorption and retention tests, and microscope analysis. The overall outcome has shown similarities between the mechanical properties of the mixture developed using methylcellulose as the binding agent and rigid polymer foams, such as the ones commonly used as insulation panels. Moreover, the material mix with the highest score in the preliminary assessment was further applied to fabricate samples with varied geometries to assess its potential and limitations combined with the fabrication process. Finally, two demonstrators were produced to explore the printing process for different geometric configurations: conceptual window frame and structural node were designed, and 3D printed as proof of concept. ...
Conference paper (2023) - S. de Groot, E. Brembilla, A. Dahlmann-Noor, L. Price, M. Khazova, A. Eijkelenboom, M. Turrin
Myopia is on the rise worldwide and its onset can be triggered by environmental factors, including light exposure. Guaranteeing an adequate exposure to daylight is particularly important for young children, whose eyes need the best conditions for a healthy development. Monitoring and assessing light levels in school buildings is therefore paramount for studies on myopia but it can prove challenging. This paper paves the way for the use of climate-based daylight simulation as a tool to complement field studies on myopia. Existing simulation tools were found to characterise vertical spot illuminance with an acceptable error range (rMBE=8,7%; rMAE=35,4%), as well as cumulative daily illuminance (rMBE=-10%; rMAE=12,6%). Spectral simulation resulted instead in larger errors, mostly for wavelengths at the edges of the visible range, previously found to be important factors in the onset of myopia. Despite current limitations, simulation tools could become an essential support for future research on myopia. ...
Journal article (2023) - F. Setaki, F. Tian, M. Turrin, M.J. Tenpierik, L. Nijs, A. van Timmeren
This paper discusses a novel, compact sound absorption solution with high performance at various frequencies, including low frequencies, achieved through the effective use of Computational Design and Additive Manufacturing (AM). Sound absorption is widely applied for reducing noise and improving room acoustics; however, it is often constrained by conventional design, material properties and production techniques, which offer limited options for customising performance. This research highlights that AM, in combination with computational design tools, can support the development of novel sound-absorbing products with high performance based on the principle of viscothermal wave propagation in prismatic tubes. The potential of these designs was explored via two studies of customised sound-absorbing panels whose performance was measured in a reverberation room. A custom measurement technique was used based on logarithmic sweeps with high-resolution FFT analysis. A comparison of the measurement results with the theory of viscothermal wave propagation indicated good agreement; thus, this study demonstrates the possibility of developing new concepts and design methods for novel room acoustic devices. ...
Journal article (2023) - F. Setaki, F. Tian, Michela Turrin, M. Tenpierik, L. Nijs, A. van Timmeren
The original online version of this article was revised: M. Turrin’s name was updated to Michela Turrin. ...
Journal article (2022) - Erron Estrado, Michela Turrin, Peter Eigenraam
As technology advances, architects often employ innovative, non-standard shapes in their designs for the fast-growing number of high-rise buildings. Conversely, climate change is bringing about an increasing number of dangerous wind events causing damage to buildings and their surroundings. These factors further complicate the already difficult field of structural wind analysis. Current methods for calculating structural wind response, such as the Eurocode, do not provide methods for unconventional building shapes or, in the case of physical wind tunnel test and in-depth computational fluid dynamics (CFD) simulation, they are prohibitively expensive and time-consuming. Thus, wind load analysis is often relegated to late in the design process. This paper presents the development of a computational method to analyze the effect of wind on the structural behavior of a 3D building model and optimize the external geometry to reduce those effects at an early design phase. It combines CFD, finite-element analysis (FEA), and an optimization algorithm in the popular parametric design tool, Grasshopper. This allows it to be used in an early design stage for performance-based design exploration in complement to the more traditional late-stage methods outlined above. After developing the method and testing the timeliness and precision of the CFD, and FEA portions on case study buildings, the tool was able to output an optimal geometry as well as a database of improved geometric options with their corresponding performance for the wind loading. ...
Journal article (2022) - T. Du, M. Turrin, S.C. Jansen, A.A.J.F. van den Dobbelsteen, Francesco De Luca
Architectural space layout has proven to be influential on building energy performance. However, the relationship between different space layouts and their consequent energy demands has not yet been systematically studied. This study thoroughly investigates such a relationship. In order to do so, a computational method was developed, which includes a method to generate space layouts featuring energy-related variables and an assessment method for energy demand. Additionally, a design of experiments was performed, and its results were used to analyse the relationship between space layouts and energy demands. In order to identify their relationship, four types of design indicators of space layout were proposed, both for the overall layout and for each function. Finally, several optimisations were performed to minimise heating, cooling and lighting demands. The optimisation results showed that the maximum reduction between different layouts was up to 54% for lighting demand, 51% for heating demand and 38% for cooling demand. The relationship analysis shows that when comparing the four types of design indicators, the façade area-to-floor area ratio showed a stronger correlation with energy demands than the façade area ratio, floor area ratio and height-to-depth ratio. Overall, this study shows that designing a space layout helps to reduce energy demands for heating, cooling and lighting, and also provides a reference for other researchers and designers to optimise space layout with improved energy performance. ...

A new design approach for loadbearing monolithic glass components of reduced annealing time

Up to now, fabricating cast glass components of substantial mass and/or thickness involves a lengthy and perplex annealing process. This has limited the use of this glass manufacturing method in the built environment to simple objects up to the size of regular building bricks, which can be annealed within a few hours. For the first time, structural topological optimization (TO) is investigated as an approach to design monolithic loadbearing cast-glass elements of substantial mass and dimensions, with significantly reduced annealing times. The research is two-fold. First, a numerical exploration is performed. The potential of reducing mass while maintaining satisfactory stiffness of a structural component is done through a case-study, in which a cast-glass grid shell node is designed and optimised. To achieve this, several design criteria in respect to glass as a material, casting as the manufacturing process and TO as a design method, are formulated and applied in the optimisation. It is concluded that a TO approach fully suited for three-dimensional glass design is as of yet not available. For this research, strain- or compliance based TO is selected for the optimization of the three-dimensional, cast glass grid shell node; in our case, we consider that a strain based TO allows for a better exploration of the thickness reduction, which, in turn, has a major influence on the annealing time of cast glass. In comparison, in a stress-based optimization, the considerably lower tensile strength of glass would become the main restrain, leaving underutilized the higher compressive strength. Furthermore, it is determined that a single, unchanging and dominant load-case is most suited for TO optimisation. Using ANSYS Workbench, mass reductions of up to 69% compared to an initial, unoptimized geometry are achieved, reducing annealing times by an estimated 90%. Following this, the feasibility of manufacturing the resulting complex-shaped glass components is investigated though physical prototypes. Two manufacturing techniques are explored: lost-wax casting using 3D-printed wax geometries, and kiln-casting using 3D-printed disposable sand moulds. Several glass prototypes were successfully cast and annealed. From this, several conclusions are drawn regarding the applicability and limitations of TO for cast glass components and the potential of alternative manufacturing methods for making such complex-shaped glass components. ...