Hydrogen gained momentum as a viable alternative to crude-derived fuels. Scalable production of green hydrogen harnessing solar energy emerged as one of the promising sustainable options that can be facilitated by photocatalyst-assisted water splitting. One-step and two-step photoexcitation systems for overall water splitting (OWS) processes gained much importance because of the ease with which they can be scaled up. This chapter gives a profound insight into the fundamental aspects of these systems, along with a broader picture regarding their possible pathway for commercial implementation. Thermodynamic and kinetic requisites of these novel systems have been described in detail and a critical appraisal of the selectivity of co-catalysts in the photocatalytic OWS process is presented. Subsequently, this chapter provides a comprehensive focus on various novel scalability studies like thin film systems, baggie reactors and the solar hydrogen farm project. The ultimate motive of this chapter is to summarize the current state-of-the-art strategies for producing green hydrogen through heterogeneous photocatalysis and the various limitations it possesses that preclude the system from reaching the market so far. By this it will motivate people to develop innovative pathways that would rectify the problems associated with it.@en

The development of antibacterial coatings is a promising approach to preventing biofilm formation and reducing the overuse of systemic antibiotics. However, widespread antibiotic use has resulted in antibiotic-resistant bacteria, limiting the efficacy of antibiotic-based coatings. Herein, an antibacterial coating is developed by layer-by-layer (LbL) assembly of two polymers namely PDLG (poly (D,L-lactide-co-glycolide)) and gelatin methacryloyl (GelMA) while chicken cathelicidin-2 (CATH-2), a cationic and amphipathic peptide, is loaded between these polymer layers. The electrospray method is used to apply the coatings to achieve efficient peptide loading and durability. The CATH-2 bactericidal concentration ranges are first identified, followed by a study of their cytotoxicity to human mesenchymal stem cells (hMSCs) and macrophage cell lines. Later, different LbL electrospray coating assemblies loaded with the optimal peptide concentration are sought. Various coating strategies are investigated to identify an LbL coating that exhibits prolonged and biocompatible CATH-2 release. The resulting CATH-2-coated titanium surfaces exhibit strong antibacterial activity against both Staphylococcus aureus and Escherichia coli bacteria for 4 days and are biocompatible with hMSCs and macrophage cells. This coating can be considered as a versatile delivery system platform for the delivery of CATH-2 peptides while avoiding cytotoxicity, particularly for the prevention of infections associated with implants.@en

Electrochemical reduction of carbon dioxide (CO₂) to useful products is an emerging power-to-X concept, which aims to produce chemicals and fuels with renewable electricity instead of fossil fuels. Depending on the catalyst, a range of chemicals can be produced from CO₂ electrolysis at industrial-scale current densities, high Faraday efficiencies, and relatively low cell voltages. One of the main challenges for up-scaling the process is related to (bi)carbonate formation (carbonation), which is a consequence of performing the reaction in alkaline media to suppress the competing hydrogen evolution reaction. The parasitic reactions of CO₂ with the alkaline electrolytes result in (bi)carbonate precipitation and flooding in gas diffusion electrodes, CO₂ crossover to the anode, low carbon utilization efficiencies, electrolyte carbonation, pH-drift in time, and additional cost for CO₂ and electrolyte recycling. We present a critical review of the causes, consequences, and possible solutions for the carbonation effect in CO₂ electrolyzers. The mechanism of (bi)carbonate crossover in different cell configurations, its effect on the overall process design, and the economics of CO₂ and electrolyte recovery are presented. The aim is to provide a better understanding of the (bi)carbonate problem and guide research directions to overcome the challenges related to low-temperature CO₂ electrolysis in alkaline media.

@en

The development of an effective and reliable sensor with the capability to detect ammonia (NH₃) gas at room temperature exerts a significant influence on the sensor industry. The gas sensing performance is notably improved by the formation of a heterostructure between metal oxide with metal sulfides. In this study, pure ZnIn₂S₄ (ZIS), Cu₂O and heterostructures of ZIS with 5, 10 and 20 wt% of Cu₂O were successfully prepared using hydrothermal, co-precipitation and heat treatment methods, respectively. A thorough investigation has been carried out to examine the sensing capabilities of all the materials upon exposure to NH₃ with different concentrations (1, 5, 10, 15, 20, 25 and 50 ppm) at room temperature (RT). Impressively, the composite material 0.9ZnIn₂S₄/0.1Cu₂O (ZIS-10) has exhibited remarkable gas sensitivity compared to pristine ZIS and Cu₂O towards 25 ppm NH₃, low limit of detection (1 ppm) with fast response/recovery times (37/25 sec). The improved performance of the ZIS-10 composite sensor may be ascribed to the synergistic effect between ZIS and Cu₂O, which facilitates the electron transfer from ZIS to the Cu₂O at the interface. The plausible gas-sensing mechanism and the pathways responsible for enhanced sensing are also discussed in detail.

@en

Operando spectroscopic techniques (Diffusive Reflective Infrared Fourier-Transform and Mössbauer emission spectroscopy) were combined to investigate the role of oxygenates deposition on deactivation of cobalt on titania Fischer-Tropsch catalysts at high pressure. Clear formation of carboxylates was seen for catalysts prepared via both impregnation and precipitation, but more and heavier carboxylates were seen on the impregnated catalyst. This effect is related to a higher olefin content in the products obtained with the impregnated sample, resulting to increased formation of oxygenates through the hydroformylation side reaction. The combined gas chromatography/infrared spectroscopy data demonstrated that the surface carboxylate species are not involved in the catalyst deactivation, being most likely spectator species on the titania support.

@en

Fischer-Tropsch synthesis (FTS) is a catalytic reaction, which involves the production of liquid hydrocarbon fuel from synthesis gas obtained from natural gas, biomass or coal via gasification and steam reforming. From an industrial perspective, both Co and Fe based catalysts have been applied. However, Co-based catalysts are preferred in FTS particularly for gas-to-liquid (GTL) processes as they have high activity, high selectivity to linear hydrocarbons and low activity for the unwanted water-gas shift reaction. However, Co-based catalysts are relatively expensive and deactivate in time. To make the FTS process economically more effective, a stable performance of the catalyst is required. Therefore, studying the catalyst deactivation is an important topic in the development of better industrial catalysts. Oxidation, sintering of active phase and deposition of oxygenated compounds are potential causes for deactivation. The possible role of oxygenates and their effect of catalyst deactivation, however, is less understood. With the aim to investigate the deposition of oxygenated compounds, particularly carboxylates, as hypothetical deactivation mechanism, operando characterisation techniques were adapted to monitor the chemical and physical properties and structure-activity relationship of the catalyst during the reaction. Operando Diffuse Reflectance Infrared Fourier Transform (DRIFT) and Mössbauer emission spectroscopy setups were employed that can be operated at industrially relevant FTS conditions.@en