General matrix-matrix multiplications with double-precision real and complex entries (DGEMM and ZGEMM) in vendor-supplied BLAS libraries are best optimized for square matrices but often show bad performance for tall & skinny matrices, which are much taller than wide. NVIDIA’s current CUBLAS implementation delivers only a fraction of the potential performance as indicated by the roofline model in this case. We describe the challenges and key characteristics of an implementation that can achieve close to optimal performance. We further evaluate different strategies of parallelization and thread distribution and devise a flexible, configurable mapping scheme. To ensure flexibility and allow for highly tailored implementations we use code generation combined with autotuning. For a large range of matrix sizes in the domain of interest we achieve at least 2/3 of the roofline performance and often substantially outperform state-of-the art CUBLAS results on an NVIDIA Volta GPGPU.

@en

The symmetric sparse matrix-vector multiplication (SymmSpMV) is an important building block for many numerical linear algebra kernel operations or graph traversal applications. Parallelizing SymmSpMV on today's multicore platforms with up to 100 cores is difficult due to the need to manage conflicting updates on the result vector. Coloring approaches can be used to solve this problem without data duplication, but existing coloring algorithms do not take load balancing and deep memory hierarchies into account, hampering scalability and full-chip performance. In this work, we propose the recursive algebraic coloring engine (RACE), a novel coloring algorithm and open-source library implementation that eliminates the shortcomings of previous coloring methods in terms of hardware efficiency and parallelization overhead. We describe the level construction, distance-k coloring, and load balancing steps in RACE, use it to parallelize SymmSpMV, and compare its performance on 31 sparse matrices with other state-of-the-art coloring techniques and Intel MKL on two modern multicore processors. RACE outperforms all other approaches substantially. By means of a parameterized roofline model, we analyze the SymmSpMV performance in detail and discuss outliers. While we focus on SymmSpMV in this article, our algorithm and software are applicable to any sparse matrix operation with data dependencies that can be resolved by distance-k coloring.

@en

The increasing complexity of hardware and software environments in high-performance computing poses big challenges on the development of sustainable and hardware-efficient numerical software. This article addresses these challenges in the context of sparse solvers. Existing solutions typically target sustainability, flexibility, or performance, but rarely all of them. Our new library PHIST provides implementations of solvers for sparse linear systems and eigenvalue problems. It is a productivity platform for performance-aware developers of algorithms and application software with abstractions that do not obscure the view on hardware-software interaction. The PHIST software architecture and the PHIST development process were designed to overcome shortcomings of existing packages. An interface layer for basic sparse linear algebra functionality that can be provided by multiple backends ensures sustainability, and PHIST supports common techniques for improving scalability and performance of algorithms such as blocking and kernel fusion. We showcase these concepts using the PHIST implementation of a block Jacobi-Davidson solver for non-Hermitian and generalized eigenproblems. We study its performance on a multi-core CPU, a GPU, and a large-scale many-core system. Furthermore, we show how an existing implementation of a block Krylov-Schur method in the Trilinos package Anasazi can benefit from the performance engineering techniques used in PHIST.

@en

General matrix-matrix multiplications (GEMM) in vendor-supplied BLAS libraries are best optimized for square matrices but often show bad performance for tall & skinny matrices, which are much taller than wide. Nvidia’s current CUBLAS implementation delivers only a fraction of the potential performance (as given by the roofline model) in this case. We describe the challenges and key properties of an implementation that can achieve perfect performance. We further evaluate different approaches of parallelization and thread distribution, and devise a flexible, configurable mapping scheme. A code generation approach enables a simultaneously flexible and specialized implementation with autotuning. This results in perfect performance for a large range of matrix sizes in the domain of interest, and at least 2/3 of maximum performance for the rest on an Nvidia Volta GPGPU.

@en

The ESSEX project has investigated programming concepts, data structures, and numerical algorithms for scalable, efficient, and robust sparse eigenvalue solvers on future heterogeneous exascale systems. Starting without the burden of legacy code, a holistic performance engineering process could be deployed across the traditional software layers to identify efficient implementations and guide sustainable software development. At the basic building blocks level, a flexible MPI+X programming approach was implemented together with a new sparse data structure (SELL-C-σ) to support heterogeneous architectures by design. Furthermore, ESSEX focused on hardware-efficient kernels for all relevant architectures and efficient data structures for block vector formulations of the eigensolvers. The algorithm layer addressed standard, generalized, and nonlinear eigenvalue problems and provided some widely usable solver implementations including a block Jacobi–Davidson algorithm, contour-based integration schemes, and filter polynomial approaches. Adding to the highly efficient kernel implementations, algorithmic advances such as adaptive precision, optimized filtering coefficients, and preconditioning have further improved time to solution. These developments were guided by quantum physics applications, especially from the field of topological insulator- or graphene-based systems. For these, ScaMaC, a scalable matrix generation framework for a broad set of quantum physics problems, was developed. As the central software core of ESSEX, the PHIST library for sparse systems of linear equations and eigenvalue problems has been established. It abstracts algorithmic developments from low-level optimization. Finally, central ESSEX software components and solvers have demonstrated scalability and hardware efficiency on up to 256 K cores using million-way process/thread-level parallelism.

@en

We first briefly report on the status and recent achievements of the ELPA-AEO (Eigen value Solvers for Petaflop Applications—Algorithmic Extensions and Optimizations) and ESSEX II (Equipping Sparse Solvers for Exascale) projects. In both collaboratory efforts, scientists from the application areas, mathematicians, and computer scientists work together to develop and make available efficient highly parallel methods for the solution of eigenvalue problems. Then we focus on a topic addressed in both projects, the use of mixed precision computations to enhance efficiency. We give a more detailed description of our approaches for benefiting from either lower or higher precision in three selected contexts and of the results thus obtained.

@en

In order to efficiently use the future generations of supercomputers, fault tolerance and power consumption are two of the prime challenges anticipated by the High Performance Computing (HPC) community. Checkpoint/Restart (CR) has been and still is the most widely used technique to deal with hard failures. Application-level CR is the most effective CR technique in terms of overhead efficiency but it takes a lot of implementation effort.

@en

While many of the architectural details of future exascale-class high performance computer systems are still a matter of intense research, there appears to be a general consensus that they will be strongly heterogeneous, featuring “standard” as well as “accelerated” resources. Today, such resources are available as multicore processors, graphics processing units (GPUs), and other accelerators such as the Intel Xeon Phi. Any software infrastructure that claims usefulness for such environments must be able to meet their inherent challenges: massive multi-level parallelism, topology, asynchronicity, and abstraction. The “General, Hybrid, and Optimized Sparse Toolkit” (GHOST) is a collection of building blocks that targets algorithms dealing with sparse matrix representations on current and future large-scale systems. It implements the “MPI+X” paradigm, has a pure C interface, and provides hybrid-parallel numerical kernels, intelligent resource management, and truly heterogeneous parallelism for multicore CPUs, Nvidia GPUs, and the Intel Xeon Phi. We describe the details of its design with respect to the challenges posed by modern heterogeneous supercomputers and recent algorithmic developments. Implementation details which are indispensable for achieving high efficiency are pointed out and their necessity is justified by performance measurements or predictions based on performance models. We also provide instructions on how to make use of GHOST in existing software packages, together with a case study which demonstrates the applicability and performance of GHOST as a component within a larger software stack. The library code and several applications are available as open source.

@en

The ESSEX project is an ongoing effort to provide exascale-enabled sparse eigensolvers, especially for quantum physics and related application areas. In this paper we first briefly summarize some key achievements that have been made within this project. Then we focus on a projection-based eigensolver with polynomial approximation of the projector. This eigensolver can be used for computing hundreds of interior eigenvalues of large sparse matrices. We describe techniques that allow using lower-degree polynomials than possible with standard Chebyshev expansion of the window function and kernel smoothing. With these polynomials, the degree, and thus the number of matrix–vector multiplications, typically can be reduced by roughly one half, resulting in comparable savings in runtime.

@en

Numerous challenges have to be mastered as applications in scientific computing are being developed for post-petascale parallel systems. While ample parallelism is usually available in the numerical problems at hand, the efficient use of supercomputer resources requires not only good scalability but also a verifiably effective use of resources on the core, the processor, and the accelerator level. Furthermore, power dissipation and energy consumption are becoming further optimization targets besides time-to-solution. Performance Engineering (PE) is the pivotal strategy for developing effective parallel code on all levels of modern architectures. In this paper we report on the development and use of low-level parallel building blocks in the GHOST library (“General, Hybrid, and Optimized Sparse Toolkit”). We demonstrate the use of PE in optimizing a density of states computation using the Kernel Polynomial Method, and show that reduction of runtime and reduction of energy are literally the same goal in this case. We also give a brief overview of the capabilities of GHOST and the applications in which it is being used successfully.

@en

As we approach the exascale computing era, disruptive changes in the software landscape are required to tackle the challenges posed by manycore CPUs and accelerators. We discuss the development of a new ‘exascale enabled’ sparse solver repository (the ESSR) that addresses these challenges—from fundamental design considerations and development processes to actual implementations of some prototypical iterative schemes for computing eigenvalues of sparse matrices. Key features of the ESSR include holistic performance engineering, tight integration between software layers and mechanisms to mitigate hardware failures.

@en

Block variants of the Jacobi-Davidson method for computing a few eigenpairs of a large sparse matrix are known to improve the robustness of the standard algorithm when it comes to computing multiple or clustered eigenvalues. In practice, however, they are typically avoided because the total number of matrix-vector operations increases. In this paper we present the implementation of a block Jacobi-Davidson solver. By detailed performance engineering and numerical experiments we demonstrate that the increase in operations is typically more than compensated by performance gains through better cache usage on modern CPUs, resulting in a method that is both more efficient and robust than its single vector counterpart. The steps to be taken to achieve a block speedup involve both kernel optimizations for sparse matrix and block vector operations, and algorithmic choices to allow using blocked operations in most parts of the computation. We discuss the aspect of avoiding synchronization in the algorithm and show by numerical experiments with our hybrid parallel implementation that a significant speedup through blocking can be achieved for a variety of matrices on up to 5 120 CPU cores as long as at least about 20 eigenpairs are sought.@en

The ESSEX project investigates computational issues arising at exascale for large-scale sparse eigenvalue problems and develops programming concepts and numerical methods for their solution. The project pursues a coherent co-design of all software layers where a holistic performance engineering process guides code development across the classic boundaries of application, numerical method, and basic kernel library. Within ESSEX the numerical methods cover widely applicable solvers such as classic Krylov, Jacobi-Davidson, or the recent FEAST methods, as well as domain-specific iterative schemes relevant for the ESSEX quantum physics application. This report introduces the project structure and presents selected results which demonstrate the potential impact of ESSEX for efficient sparse solvers on highly scalable heterogeneous supercomputers.

@en