The terahertz frequency region of the electromagnetic spectrum is crucial for understanding the formation and evolution of galaxies and stars throughout the universe's history, as well as the process of planet formation. Detecting the unique spectral signatures of molecules and atoms requires terahertz spectrometers, which must be operated in space observatories due to water vapor absorption in the Earth's atmosphere. However, current terahertz spectrometers face challenges such as low resolution, limited bandwidth, large volume, and complexity. In this paper, the issues of size and weight are addressed by demonstrating a concept for a centimeter-sized, low-weight terahertz spectrometer using a metasurface. The design of the metasurface spectrometer is first discussed for the 1.85 to 2.4 THz range, followed by its fabrication. Next, an array of quantum cascade lasers operating at slightly different frequencies around 2.1 THz is utilized to characterize the spectrometer. Finally, a spectrum inversion method is applied to analyze the measured data, confirming a resolution R (λ/Δλ) of at least 273. This concept can be extended to other application areas, such as planetary observations and various wavelengths in the far-infrared (FIR) and near-infrared (NIR) ranges.

We present an 8-beam local oscillator (LO) for the astronomically significant [OI] line at 4.7 THz. The beams are generated using a quantum cascade laser (QCL) in combination with a Fourier phase grating. The grating is fully characterized using a third order distributed feedback (DFB) QCL with a single mode emission at 4.7 THz as the input. The measured diffraction efficiency of 74.3% is in an excellent agreement with the calculated result of 75.4% using a 3D simulation. We show that the power distribution among the diffracted beams is uniform enough for pumping an array receiver. To validate the grating bandwidth, we apply a far-infrared (FIR) gas laser emission at 5.3 THz as the input and find a very similar performance in terms of efficiency, power distribution, and spatial configuration of the diffracted beams. Both results represent the highest operating frequencies of THz phase gratings reported in the literature. By injecting one of the eight diffracted 4.7 THz beams into a superconducting hot electron bolometer (HEB) mixer, we find that the coupled power, taking the optical loss into account, is in consistency with the QCL power value.

We have performed frequency locking of a dual, forward reverse emitting 3rd order distributed feedback quantum cascade laser (QCL) at 3.5 THz. By using both directions of THz emission in combination with two gas cells and two power detectors, we can for the first time perform frequency stabilization, while monitor the frequency locking quality independently. We also characterize how the use of a less sensitive pyroelectric detector can influence the quality of frequency locking, illustrating experimentally that the sensitivity of the detectors is crucial. Using both directions of THz radiation has a particular advantage for the application of a QCL as a local oscillator, where radiation from one side can be used for frequency/phase stabilization, leaving the other side to be fully utilized as a local oscillator to pump a mixer.

We report an extensive study of the effect of an additional dielectric layer on the frequency of terahertz quantum cascade lasers (QCLs). QCLs with third-order distributed feedback structure at frequencies of 3.5 and 4.7 THz are used in our experiment. The dielectric layer applied is either Silicon-dioxide (SiO₂) or Polymethylmethacrylaat (PMMA). We find that both dielectric layers can down shift the lasing frequency up to 6GHz on a 3.5THz QCL, and 13GHz for a 4.7THz QCL. Full 3D FEM simulations suggest that the effect is dominated by the effective thickness of the dielectric on the vertical walls of the laser structure, and also confirm that for a given dielectric layer the effect is stronger in the 4.7THz QCL due to its larger out-distribution of electric-magnetic field. The knowledge provides guideline to shift the frequency of an existing QCL used as a local oscillator in practical applications.

We report an extensive study of the effect of an additional dielectric layer on the frequency of terahertz quantum cascade lasers (QCLs). QCLs with third-order distributed feedback structure at frequencies of 3.5 and 4.7 THz are used in our experiment. The applied dielectric layer is either Silicon dioxide (SiO₂) or Polymethylmethacrylaat (PMMA). We find that both dielectric layers can shift the lasing frequency by up to-6 GHz on a 3.5-THz QCL, and up to-13 GHz for a 4.7-THz QCL. Full 3-D FEM simulations suggest that the effect is dominated by the effective thickness of the dielectric on the side walls of the laser structure, and also confirm that for a given dielectric layer, the effect is stronger in the 4.7-THz QCL due to its different extension of the electromagnetic field to the free space. This study provides a guideline for shifting the frequency of an existing QCL for frequency critical applications such as spectroscopy or use as a local oscillator.