The storage of renewable hydrogen in salt caverns requires fast injection and production rates to cope with the imbalance between energy production and consumption. This raises concerns about the mechanical stability of salt caverns under such operational conditions. The use of appropriate constitutive models for salt mechanics is an important step in investigating this issue, therefore many constitutive models with several parameters have been presented in the literature. However, a robust calibration strategy to reliably determine which model and parameter set represents the given rock, based on stress–strain data sets, remains an unsolved challenge. In this paper, for the first time in the community, we present a multi-step strategy to determine a single parameter set based on many deformation data sets for salt rocks. Towards this end, we first develop a comprehensive constitutive model able to capture all relevant nonlinear deformation physics of transient, reverse, and steady-state creep. The determination of the single set of representative material parameters is then achieved by framing the calibration process as an optimization problem, for which the global Particle Swarm Optimization algorithm is employed. To allow for dynamic data integration, a multi-step calibration strategy is developed for a situation where experiments are included one at a time, as they become available. Additionally, due to the existing mild heterogeneity in the experimental rock samples, our optimization strategy is made flexible to allow for this slight heterogeneity. The devised optimization strategy, based on the multi-physics comprehensive constitutive modeling framework, results in a single set of representative material properties of all the deformation data sets. As a rigorous mathematical analysis for the presented method and the lack of relevant experimental data sets, we consider a wide range of synthetic experimental data sets, inspired by the existing sparse relevant data in the literature. The results of our performance analyses show that the proposed calibration strategy is robust. Moreover, the results become increasingly more accurate as more data sets become available.

@en

Natural fracture network characteristics can be establishes from high-resolution outcrop images acquired from drone and photogrammetry. Such images might also be good analogues of subsurface naturally fractured reservoirs and can be used to make predictions of the fracture geometry and efficiency at depth. However, even when supplementing fractured reservoir models with outcrop data, gaps will remain in the model and fracture network extrapolation methods are required. In this paper we used fracture networks interpreted from two outcrops from the Apodi area, Brazil, to present a revised and innovative method of fracture network geometry prediction using the multiple-point statistics (MPS) method.

The MPS method presented in this article uses a series of small synthetic training images (TIs) representing the geological variability of fracture parameters observed locally in the field. The TIs contain the statistical characteristics of the network (i.e. orientation, spacing, length/height and topology) and allow for the representation of a complex arrangement of fracture networks. These images are flexible, as they can be simply sketched by the user.

We proposed to simultaneously use a set of training images in specific elementary zones of the Apodi outcrops in order to best replicate the non-stationarity of the reference network. A sensitivity analysis was conducted to emphasise the influence of the conditioning data, the simulation parameters and the training images used. Fracture density computations were performed on selected realisations and compared to the reference outcrop fracture interpretation to qualitatively evaluate the accuracy of our simulations. The method proposed here is adaptable in terms of training images and probability maps to ensure that the geological complexity in the simulation process is accounted for. It can be used on any type of rock containing natural fractures in any kind of tectonic context. This workflow can also be applied to the subsurface to predict the fracture arrangement and fluid flow efficiency in water, geothermal or hydrocarbon fractured reservoirs.@en