Purpose: Only recently have historic concrete buildings received attention and the need for their protection has been understood. Their listing as architectural heritage in most countries is ruled by legislations. The research carried out within the framework of the CONSECH20 JPI project on the conservation of historic concrete buildings in the Czech Republic, Cyprus, Italy and the Netherlands has allowed to study the legislations in the four aforementioned countries and how these are brought to practice. This paper aims at the evaluation of these legislations and of their function in practice. Design/methodology/approach: The legislations have been examined focussing on the protection of historic buildings and the guidelines to achieve a correct technical conservation. These were assessed in practical situations. The situations of the four countries were studied and the parameters used allowed comparisons. Findings: Concrete buildings are at risk and the guidelines should be further developed to meet actual conservation needs, including historical and aesthetical compatibility. The re-use of listed concrete buildings often means transforming and adapting these to a variety of modern needs and norms: the complexity of this assignment asks for a multidisciplinary teamwork. The bottom-up Dutch programme for quality in conservation, striving to bring ethical and technological principles to practice, could be a sound basis for developing respectful conservation strategies of heritage concrete buildings. Research limitations/implications: The research concerns the four countries involved in the CONSECH30 project and could be extended to include more countries. Practical implications: More stakeholders have to be involved in the process of conservation and transformation of heritage concrete buildings. This should be directed by the legislation. Social implications: No direct social implications are foreseen from the outcome of the research. However, the suggestion is made that social involvement is essential in planning concrete building transformations. Originality/value: The study focussed on the application of theory (the legislation) to practice (thus showing the limits of the legislation), which is an innovative way of contributing to the conservation of historic concrete buildings.

@en

Renders and plasters have significant functions in buildings. Their functionality is closely related to their properties, which depend on the mortar itself, the application technology, the interaction with the environment and the substrate. There are many basic characteristics that influence the performance of renders and plasters; however, many of them are interrelated, thus the set of characteristics to be determined in each case is different, depending on the specific at each time use. These characteristics, their interrelations and the grouping of them are discussed and schematically described in the first and introductory section. Three groups are considered for renders and plasters: properties of fresh mortars; properties related to the hygric behaviour; and the mechanical behaviour. The properties of lime-based mortars measured in laboratory are highly affected by factors, such as: need of long time for development of representative values for prediction of their life-time behaviour, proper climatic conditions adequate for carbonation or/and hydration, sensitivity to the suction of water by the substrate. The last two factors—environment and substrate—have an important role for rendering and plastering with lime-based mortars, since both their exposed surfaces and the substrate areas they cover are large. Due to those specificities, the current test methods that have been mainly developed for cement-based mortars are not always fitted to characterize lime-based mortars, and in particular to assess lime-based renders and plasters. In section two the main characteristics and current standardized test methods are discussed based on experience in using them. Furthermore, needs of improvement are identified and changes are proposed, or, in some cases, new methods are outlined. Some of the most significant changes proposed are the possibility, as an option, to apply the mortar on a porous substrate, instead of moulding specimens in metallic moulds, together with modifications on curing conditions and times of mixing and testing. Additionally, test methods developed at laboratory to evaluate the cracking tendency due to restrained shrinkage and to determine the modulus of elasticity of under checking mortars are proposed, as well as alternative test methods for adhesion. In the case of testing other properties, smaller changes are proposed, in order for the standardized test methods to be adapted to the particularities of lime-based renders and plasters. As conclusions, in the third section, a synthesis of the proposed changes and complementary tests has been made in formulated tables, that could be considered as a first approach of adapted requirements for better performance of lime-based mortars for renders and plasters.

@en

Salt crystallization is a major cause of damage in porous building materials. Accelerated salt weathering tests carried out in the laboratory are among the most common methods to assess the durability of material to salt decay. However, existing standards and recommendations for salt weathering tests have limitations in terms of effectiveness and/or reliability. In the framework of the RILEM Technical Committee 271-ASC, a procedure has been developed which proposes a new approach to salt crystallization tests. It starts from the consideration that salt damage can be seen as a process developing in two phases: accumulation of the salt in the material and propagation of the decay. In the first phase, salts are introduced in the material and accumulate close to the evaporation surface, while in the second phase damage propagates because of repeated dissolution and crystallization cycles, induced by re-wetting with liquid water and by relative humidity changes. In this paper, the procedure is described and the results of a first round robin validation of the test, carried out on 7 materials and involving 10 laboratories, are presented. The results show that the procedure is effective to cause decay within the time period of the test (about 3 months) and that the decay increases with subsequent cycles. The decay observed differs in type and severity depending on the salt type and concentration and on the type of substrate. The decay types detected in the laboratories are generally representative of those observed in the field for the selected substrates. The differences in durability between the various substrates, as assessed at the end of the test, are in line with the durability expected based on field observation. The reproducibility of the results in terms of decay type is good; some differences have been observed in terms of material loss. These are more significant in the case of NaCl contaminated specimens. Based on the results, proposals for fine-tuning of the procedure are given.

@en

The RILEM TC ASC-271 is developing a new laboratory test to assess the durability of porous building materials to salt crystallisation. The test encompasses two phases: salt accumulation and damage propagation. This paper focuses on designing a procedure for the accumulation phase; this is considered successful when salts crystallise at the material's evaporative surface (common situation observed on site) without the occurrence of damage. Two procedures were developed and tested on two limestones with different porosity: (1) capillary absorption of a salt solution followed by drying, and (2) continuous capillary absorption. Sodium chloride or sodium sulphate solutions were used. Several methods for assessing the salt distribution were employed: ultrasonic pulse velocity, drilling/scratching resistance, hygroscopic moisture content, ion chromatography, scanning electron microscopy, and micro X-ray fluorescence. The results enabled the selection of the most effective protocol for the salt accumulation phase.

@en

Historic concrete buildings are at risk. Limited knowledge of concrete technology until the 1960s led to more sensitive buildings than modern concrete buildings. In addition, the lack of sensibility regarding their heritage value and insufficient protection is leading to remorseless demolition. Still, concrete has proved to be a resilient material that can last over a century with proper care. There is not yet an estimation of the status of historic concrete buildings in Europe. Until now, a few attempts have been done to secondarily, and subjectively, gauge their conservation status. This paper is the result of a joint investigation studying forty-eight historic concrete buildings distributed in four countries. They were surveyed by expert teams according to a predefined methodology. The study aims to identify recurrent damages and parameters affecting the conservation state. It also aims to serve as the first trial for an objective and measurable methodology, to apply it with a statistically significant number of cases. Damages related to the corrosion of reinforcement and moisture-related processes were the most recurrent. The use of plasters, flat roofs, and structural façade walls show a positive effect in protecting the concrete. The state of conservation has a great variability across countries. @en

The durability of building materials with respect to salt crystallization is commonly determined by accelerated weathering tests, carried out in the laboratory. An effective laboratory weathering test should assess the durability and, in the case of conservation of historic buildings, the compatibility of repair materials with those existing. Besides, the test should provide reliable results within a reasonable period of time, accelerating the deterioration process without however altering its mechanism. Despite several national and international standards, recommendations and guidelines, a commonly accepted testing protocol does not yet exist. Researchers often develop and apply their own procedure, a fact that complicates comparison between different studies. The RILEM Technical Committee 271 ASC has been set up with the scope of developing improved test procedures for the assessment of the behaviour of materials under the influence of salt crystallization, which should overcome the limitations of existing standards and recommendations. This paper constitutes one of the first results of the work of the Technical Committee. It critically reviews the literature on salt crystallization tests, identifies advantages and limitations of the several test protocols and provides new ideas for the development of improved salt crystallization procedures.

@en