Three imidazole-based compounds (imidazole, 2-mercaptobenzimidazole, and 2-mercapto-1-methylbenzimidazole) were studied as corrosion inhibitors of Cu, Zn, and a family of Cu-xZn brass alloys (x = 10−40 wt%) in 3 wt% NaCl solution. The composition of inhibitor layers on the surface was studied using X-ray photoelectron and infrared spectroscopies. The molecular adsorption modes on Cu and Zn were modelled using density-functional theory (DFT) calculations. Mercapto-based inhibitors act as efficient inhibitors on all materials studied due to the formation of inhibitor layer through bonding with nitrogen and sulphur atoms. In contrast, imidazole is a moderate inhibitor for Zn, while it is much less efficient for Cu.

The often used simplistic correlations between molecular electronic parameters and experimentally determined corrosion inhibition efficiencies are critically evaluated for a set of 24 heterocyclic organic compounds, tested as corrosion inhibitors for copper in 3 wt.% NaCl aqueous solution. Twelve different molecular electronic descriptors—such as ionization potential, electron affinity, HOMO–LUMO gap, dipole moment—are tested and it is shown that none of them displays any noticeable correlation with the inhibition efficiency. Our results, therefore, cast serious doubt on reported correlations between such parameters and inhibition efficiency, obtained for only a few inhibitors, which are abundant in the literature. We also discuss some pros and cons of inhibition efficiency as a metric for evaluating the performance of corrosion inhibitors, and introduce a new metric termed inhibition power that uses the universal logarithmic scale and dimensionless decibel (dB) units.

Efficiency of corrosion inhibitors in aqueous solutions depends on several interfacial parameters, which may vary over time. Therefore, reliable electrochemical techniques are demanded for screening the efficiency of corrosion inhibitors and monitoring their performance over time. Here, we evaluate corrosion inhibition efficiency of imidazole-based compounds on bare Cu surfaces and highlight the importance of electrochemical evaluation of the inhibitor over time, characterized by linear polarization resistance techniques as a reliable, instantaneous and non-invasive method for assessing intrinsic inhibitor performance in lab screening studies.