East/West (E/W) vertical bifacial photovoltaic (PV) modules can achieve higher profits than the conventional North/South (N/S) tilted configuration depending on the design choices and external conditions. In this study a model based on 2D view factor concept is developed to estimate the power generated by a large-scale bifacial PV farm, considering the non-uniformity of the incident irradiance and the spectral impact. A validation using measured data is performed, focusing on the non-uniformity of the rear irradiance. This model is used to compare the profitability between E/W vertical and N/S tilted PV farm configurations, considering higher prices during noon with respect to morning/evening periods. The results identify the ratio between these two price values as the key variable that influences the comparison between the PV farm configurations. Specifically, a sufficiently high price ratio ensures the higher profitability of E/W vertical modules, however, the exact value is dependent on the location and the design variables. In general, higher row-to-row distance and lower diffuse fraction enhance the profitability of the E/W vertical over the N/S tilted configuration. On the other hand, elevation of the modules, curtailment strategies and hybrid solutions have a minor influence.@en

In this chapter, we introduce the physic principle and applications of bifacial PV technology. We present different bifacial PV cell and module technologies as well as investigate the advantages of using bifacial PV technology in the field. We describe the measurement and modeling of Albedo, which is one of the important factors for the energy yield of bifacial PV technology. For an accurate assessment of the performance ratio of bifacial PV strings, it is necessary to measure the albedo irradiance using an albedometer or the front- and rear-side plane of array (POA) irradiance. We also discuss the advanced techniques for the characterization of bifacial PV modules. By means of simulation, we give insight into what boundary conditions result in new bifacial technology gains and the influence of the mounting position of irradiance sensors. We executed several simulations by varying the sensor positions on the rear side of the PV modules, different places, different albedo numbers, mounting heights, different geographical locations with various tilts, seasons, and weather types. To validate the simulation results, we performed various experiments in the field under different conditions. The results prove that the bifacial gain is highly dependent on the mounting heights of PV modules, tilt angles, weather conditions, latitude, and location.@en

The accurate computation of the irradiance incident on the surface of photovoltaic modules is crucial for the simulation of the energy yield of a photovoltaic system. Depending on the geometrical complexity of the surroundings, different approaches are commonly employed to calculate the irradiance on the photovoltaic system. In this article, we introduce a backward ray tracing simulation approach to calculate the irradiance on photovoltaic systems in geometrically complex scenarios. We explain how the repetition of time-consuming simulation steps can be avoided with the proposed approach by storing a selection of the results from the most computationally expensive parts of the problem, and we show that the irradiance calculated with the proposed approach is in good agreement with the results of Radiance, a well-established irradiance simulation tool. Furthermore, we present an experimental validation carried out using a pyranometer and a reference cell over a period of 6 months in a complex scenario, which shows errors lower than 5% in the calculation of the daily irradiation. Finally, we compare high-resolution spectral simulations with measurements taken with a spectroradiometer under different sky conditions. The proposed approach is particularly well-suited for the simulation of bifacial and tandem photovoltaic modules in complex urban environments, for it enables the efficient simulation of high-resolution spectral irradiance in scenarios with time-varying reflectance properties.

@en