We introduce Microgel-based Etalon Membranes (MEMs), based on the combination of stimuli-responsive microgels with an etalon, which is an optical device consisting of two reflecting plates and is used to filter specific wavelengths of light. The microgels are sandwiched between two reflective layers and, in response to a stimulus (e.g., temperature, pH, or biomarker concentration), swell or de-swell, thereby changing the distance between the two reflective layers and generating multiple peaks in the reflectance spectra. This property gives a MEM the unique capability of simultaneous separation and tunable responses to environmental changes and/or biomarker concentrations. We propose a design based on gold layers on a silicon nitride wafer membrane. Our comprehensive characterization, employing permeability experiments, in situ optical reflectance spectroscopy, in-liquid atomic force microscopy (AFM) analysis, and captive bubble contact angle measurements, elucidates the dynamic response of MEM to pH, temperature, and glucose stimuli and the corresponding effect of microgel swelling/de-swelling on the membrane properties, e.g., permeability. The AFM results confirm the dynamic changes of the microgel layer’s thickness on the membrane surface in response to the stimuli. Although the microgel’s swelling/de-swelling influences the effective pore radius, the decrease in the membrane’s permeance is limited to less than 10%. In the swollen state of the microgels, the etalon membranes show a prominent hydrophilic behavior, while they become less hydrophilic in the microgels’ de-swollen state. This work introduces MEM and provides novel insights into their behavior. The fundamental understanding that we reveal opens the way to applications ranging from point-of-care testing to continuous environmental monitoring.

@en

Microfluidic technology is a powerful tool to enable the rapid, accurate, and on-site analysis of forensically relevant evidence on a crime scene. This review paper provides a summary on the application of this technology in various forensic investigation fields spanning from forensic serology and human identification to discriminating and analyzing diverse classes of drugs and explosives. Each aspect is further explained by providing a short summary on general forensic workflow and investigations for body fluid identification as well as through the analysis of drugs and explosives. Microfluidic technology, including fabrication methodologies, materials, and working modules, are touched upon. Finally, the current shortcomings on the implementation of the microfluidic technology in the forensic field are discussed along with the future perspectives.@en

Acoustic manipulation of particles in microchannels has recently gained much attention. Ultrasonic standing wave (USW) separation of oil droplets or particles is an established technology for microscale applications. Acoustofluidic devices are normally operated at optimized conditions, namely, resonant frequency, to minimize power consumption. It has been recently shown that symmetry breaking is needed to obtain efficient conditions for acoustic particle trapping. In this work, we study the acoustophoretic behavior of monodisperse oil droplets (silicone oil and hexadecane) in water in the microfluidic chip operating at a non-resonant frequency and an off-center placement of the transducer. Finite element-based computer simulations are further performed to investigate the influence of these conditions on the acoustic pressure distribution and oil trapping behavior. Via investigating the Gor’kov potential, we obtained an overlap between the trapping patterns obtained in experiments and simulations. We demonstrate that an off-center placement of the transducer and driving the transducer at a non-resonant frequency can still lead to predictable behavior of particles in acoustofluidics. This is relevant to applications in which the theoretical resonant frequency cannot be achieved, e.g., manipulation of biological matter within living tissues.

@en

Nature has been a constant source of inspiration for technological developments. Recently, the study of nature-inspired materials has expanded to the micro- and nanoscale, facilitating new breakthroughs in the design of materials with unique properties. Various types of superhydrophobic surfaces inspired by the lotus/rice leaf are examples of nature-inspired surfaces with special wettability properties. A new class of functional surfaces whose design is inspired by the pitcher plant are the slippery liquid-infused porous surfaces (SLIPS). This Review summarizes the properties, design criteria, fabrication strategies, and working mechanisms of both surfaces with specific focus on SLIPS. The applications of SLIPS in the field of membrane technology [slippery liquid-infused membranes (SLIMs)] are also reviewed. These membranes are also known as liquid gating membranes due to the gating functionality of the capillary-stabilized liquid in the membrane pores leading to a smart gating mechanism. Similar to the gating ion channels in biological systems, the pores open and close in response to the ambient stimuli, e.g., pressure, temperature, and ions. Different types of stimuli-responsive smart gating membranes are introduced here, and their properties and applications are reviewed in detail. Finally, challenges and perspectives on both SLIPS and smart gating membranes are discussed. This Review provides a thorough discussion and practical applications of nature-inspired functional surfaces and membranes to pave the way for future research and further developments in this emerging field.

@en