Since the mid-1990s laser scanning or light detection and ranging (Lidar) has matured into a sophisticated mapping technology routinely used for 3D modelling of cities, power stations and factories; power line mapping; dike and dune inspection for flood prevention; monitoring of forests, open pit mines, construction sites, tunnels and glaciers; and many other applications. A laser scanner emits laser beams for measuring: (1) range – distance from the sensor to the first surface hit by the laser beam; (2) scan angle; and (3) intensity of the return. These measurements combined with GNSS (Global Navigation Satellite System) 3D positioning and the inertial measurements unit (IMU) result in accurate 3D coordinates of object points. To further improve the accuracy and to transform the 3D coordinates to a common reference frame, registration of the diverse scans and ground control points (GCP) are required. Lidar sensors can be mounted on a wide variety of platforms, including vehicles, the human back and manned and unmanned aircraft and helicopters. This chapter first elaborates on basics of laser light and point clouds, then continues with georeferencing, followed by the principles of airborne Lidar and ground-based Lidar and a comparison of their point characteristics.@en

Built environments developed on compressible soils are susceptible to land deformation. The spatiotemporal monitoring and analysis of these deformations are necessary for sustainable development of cities. Techniques such as Interferometric Synthetic Aperture Radar (InSAR) or predictions based on soil mechanics using in situ characterization, such as Cone Penetration Testing (CPT) can be used for assessing such land deformations. Despite the combined advantages of these two methods, the relationship between them has not yet been investigated. Therefore, the major objective of this study is to reconcile InSAR measurements and CPT measurements using machine learning techniques in an attempt to better predict land deformation.

@en

People continue to migrate from rural areas to major cities, driving sustained urban growth and increasing the demand for accurate, detailed and up-to-date 3D city models. The creation of such models is still a cumbersome endeavour but new advancements, such as the combination of three sensor types – nadir camera, oblique cameras and a Lidar unit – in one and the same geodata acquisition system, may bring relief. Aerial surveys conducted in major cities in the UK and Ireland demonstrate the potential of this solution.@en

The use of an unmanned aerial system (UAS) – cameras and Lidar sensors mounted on an unmanned aerial vehicle (UAV or ‘drone’) – to acquire geodata for mapping purposes has evolved beyond infancy and is now rapidly maturing. How will UAS mapping evolve in foreseeable future? To envisage where exactly UAS technology is heading, it is appropriate to start with the big picture before examining the details.@en

Accurate geoinformation about urban areas, public buildings or historical sites is in great demand. It has become astonishingly easy to capture these scenes through cameras or laser scanning or to acquire open data from a diversity of sources. Professionals without a surveying background can do the job, but such professionals require reliable, robust, easy-to-use and affordable processing tools. Today, cloud computing can meet that need, enabling users to work with software packages running on remote servers on either a pay-per-use or a subscription basis. This article presents a cloud computing service dedicated to geoinformation software@en

The battle against poverty in developing countries has always been associated with the issue of land. Since the turn of the millennium, the focus has been on facilitating the official registration of land rights by the poor and the vulnerable. Many countries in sub-Saharan Africa still lack a well-functioning land administration system, notwithstanding many dedicated aid programmes. Such programmes were designed by Western institutions and often copied Western land administration architectures. In this article, the author advocates a bottom-up approach using census-taking as a paradigm. First the capabilities of advanced technologies are identified, then the way aid is brought to the vulnerable is explored and lastly an approach based on conducting population and housing censuses in sub-Saharan Africa is considered.@en

Did you know that you can waste a week or more per year hunting for a parking space in busy cities? Nowadays, smart parking apps offer a much-needed answer to the problem – and mobile mapping point clouds and imagery are core ingredients of the solution. Besides saving time by guiding you straight to an available spot close to your destination, smart parking apps also reduce unnecessary fuel consumption, air pollution and greenhouse gas emissions. One such app is AppyParking by London-based AppyWay.@en

Terrestrial laser scanning is becoming an increasingly preferred surveying technique for the 3D documentation of historical buildings. 3D point clouds provide a wealth of information which advanced 3D mapping software can exploit in a relatively simple way, at least when compared to the tedious surveying techniques of the past. However, effective cooperation between architects and the survey team of experts is necessary in order to get the best out of this geodata acquisition technology. In this article, the authors first provide an overview of equipment based on the size of the site and the surveying aim, and subsequently give four examples of how terrestrial laser scanning can benefit the restoration of damaged historical buildings.@en

This paper presents our work on automated classification of Mobile Laser Scanning (MLS) point clouds of urban scenes with features derived from cylinders around points of consideration. The core of our method consists of spanning up a cylinder around points and deriving features, such as reflectance, height difference, from the points present within the cylindrical neighbourhood. Crucial in the approach is the selection of features from the points within the cylinder. An overall accuracy could be achieved, exploiting two bench mark data sets (Paris-rue-Madame and IQmulus & TerraMobilita) of 83% and 87% respectively.

@en

The demand for 3D maps of cities and road networks is steadily increasing and mobile mapping systems are often the preferred acquisition method for capturing such scenes. Manual processing of point clouds is labour intensive and thus time consuming and expensive. This article focuses on the state of the art of automatic classification and 3D mapping of road objects from point clouds acquired by mobile mapping systems and considers the feasibility of exploiting scene knowledge to increase the robustness of classification.@en

The ‘smart city’ concept entirely relies on a permanent stream of massive amounts of data acquired by a great variety of sensors distributed throughout the city. Smart use of all this data requires integration with 3D city maps for which point clouds, acquired by laser scanning or photogrammetry, are the main sources. The author of this article identifies the abilities of point clouds to support the smart city concept.@en

A knowledge-based system exploits the knowledge, which a human expert uses for completing a complex task, through a database containing decision rules, and an inference engine. Already in the early nineties knowledge-based systems have been proposed for automated image classification. Lack of success faded out initial interest and enthusiasm, the same fate neural networks struck at that time. Today the latter enjoy a steady revival. This paper aims at demonstrating that a knowledge-based approach to automated classification of mobile laser scanning point clouds has promising prospects. An initial experiment exploiting only two features, height and reflectance value, resulted in an overall accuracy of 79% for the Paris-rue-Madame point cloud bench mark data set.@en

This paper focusses on the feasibility of classifiers, developed for classifying multispectral images, for assigning classes to point clouds of urban scenes. The motivation of our research is that dense point clouds require fast classification methods to extract meaningful information within a reasonable amount of time and multispectral classifiers do have this property. We employ two encoding methods acting on one feature: the altitude above street level. We emphasize computation time and therefore we use just one feature in this prelimina@en

The demand for 3D maps of cities and road networks is steadily growing and mobile laser scanning (MLS) systems are often the preferred geo-data acquisition method for capturing such scenes. Because MLS systems are mounted on cars or vans they can acquire billions of points of road scenes within a few hours of survey. Manual processing of point clouds is labour intensive and thus time consuming and expensive. Hence, the need for rapid and automated methods for 3D mapping of dense point clouds is growing exponentially. The last five years the research on automated 3D mapping of MLS data has tremendously intensified. In this paper, we present our work on automated classification of MLS point clouds. In the present stage of the research we exploited three features - two height components and one reflectance value, and achieved an overall accuracy of 73%, which is really encouraging for further refining our approach.@en

NUBIGON is a start-up company with offices in Turkey and Austria that has developed powerful reality capture software. The company’s solution visualises Lidar and photogrammetric point clouds in real time and in full HD, while retaining the accurate precision that is needed by many professionals who are working with point clouds. GIM International decided to interview Murat Arikan, the company’s ambitious founder and lead software developer, to find out more.@en