The potential of Building Information Models (BIM) to establish rights and responsibilities for multi-level building complexes in cadastral registrations has been explored in many previous researches. However, the implementation of BIM-based cadastral registrations in practice remains limited due to the complex interplay between technical potentials and legal implications as well as uncertainty about the additional complexity of a BIM model and the extra work that will be required to generate the BIM Legal model. In collaboration with Netherlands Kadaster, we have investigated the data requirements for a BIM Legal model that will support the 3D cadastral registration of apartment complexes and that aligns with BIM creation processes in practice. The BIM Legal model aims to visualise the spatial aspects of apartment complexes and to align the cadastral registration to the 3D data that is generated in the design and construction phase of new buildings. The BIM Legal file will be submitted when an apartment complex is being registered and is based on IFC, the open standard established by BuildingSMART International and used in the BIM domain. To make the implementation of BIM Legal feasible legally, technically, and economically, we apply a 3-phase approach. This paper presents the BIM Legal model as defined in Phase 1, which enables to generate a BIM Legal model compliant with current legislation frameworks with no/minimal manual interaction from BIM models as commonly generated in design processes. The paper describes the 3-phase approach, the context of Phase 1, the data requirement analyses, the defined BIM Legal data model, as well the questions that emerged during the specification process that need to be answered to further improve the implementation of Phase 1 and to further develop BIM Legal for Phases 2 and 3.@en

In the evolving landscape of digitalization, automating building permit processes are crucial for municipalities and other governmental bodies. Our research addresses the complexities of modeling digital building permit regulations, considering the level of the information needs (LoIN) for geometry-based regulations in four municipalities (Prague, Lisbon, Vila Nova de Gaia, and Ascoli Piceno) as case study. We propose a methodology and guidelines for geometrical building modeling, addressing challenges of integrating geoinformation with Building Information Modeling (BIM) for environmental based digital building permit (DBP) checks. This paper provides BIM-IFC geometrical interpretation choices, ensuring a seamless conversion into 3D city models. It offers insights for software companies, developers, and standardization organizations towards in implementing DBP checks, and preliminary results for a future scalable approach.@en

The digitalisation of the built environment is a key challenge and opportunity for the construction industry. One of the emerging trends in this field is the development and use of digital twins, which are virtual representations of physical assets that can be used for simulation, analysis, and optimisation. However, creating and maintaining digital twins require interoperable and geospatially accurate data from different sources and formats. During the presentation, we introduce two software tools that have been developed by our team to facilitate the integration of geospatial and Building Information Modeling (BIM) data for digital twin applications. [...]@en

The role and adoption of 3D city models have been changing from a data endpoint to a centralised data source that is used for a variety of different analyses in different sectors. This change has not yet been fully completed and the transition process is still very noticeable at certain places. For example, data required for city-scale analyses are often missing, incorrect, or not stored in a standard way. A subset of these data (E.g. shell volume, shell area & footprint area) can be approximated from lower LoD shapes (LoD2.2 or lower) in the 3D city models. However, these models frequently simplify reality and therefore these approximations are not accurate. This paper proposes computing these data by voxelising Building Information Modelling (BIM) models representing the same buildings as the 3D city model. It is shown that a subset of these approximations (shell volume & footprint area) are more accurate than values computed from lower LoD shapes. Storing these data as attributes of the building models in 3D city models can improve the ease of use and the outcome of city-scale analyses. The computed values from BIM models can also be assigned to outputs of BIM to Geo conversions. This overturns the accuracy loss of the geometry caused by the conversion in which geometry is significantly generalised and simplified.@en

This paper introduces Property Valuation Application Domain Extension (ADE) within CityGML 3.0, aiming to integrate relevant indoor and outdoor 3D variables (cost estimation, view quality, etc.) for accurate property valuation. Current models lack the necessary features for this specific application. Leveraging IFC data for indoor elements, this ADE extends CityGML, addressing the existing gap. This paper identifies and categorizes data requirements, leading to the conceptualization and development of the model. By enriching CityGML 3.0 with IFC data, the approach introduces new features like the "Property Unit" to ensure adaptability across diverse valuation scenarios. Despite encountering data integrability challenges, we here commit to refining the model and overcoming these obstacles. A preliminary implementation using CityJSON demonstrates successful integration and paves the way for future implementation. These include developing an API platform and establishing an official repository to facilitate practical usability and scalability. This research significantly contributes to advancing property valuation processes by providing accurate valuations for stakeholders and promoting the use of 3D urban data in domain-specific extensions.@en

The integration of geoinformation with Building Information Models (BIM), termed GeoBIM, has garnered significant attention across academic and non-academic sectors due to its potential for analyzing the reciprocal impacts of new designs on their environment. However, achieving integration between 3D city models and BIM necessitates ensuring consistency and alignment between their respective features and specifications. Georeferencing, a fundamental task in GeoBIM, involves establishing a connection between digital models and the Earth’s surface through coordinate transformations. Despite its importance, accurate georeferencing of BIM models has often been overlooked, resulting in challenges for integrating BIM models and geographical data. To address this gap, our study proposes a novel approach to enhance the georeferencing accuracy of BIM models by integrating surveyed points, considering the varying levels of georeferencing precision applicable to Industry Foundation Classes (IFC) models. We explore the potential benefits and challenges associated with this integrated surveyed point methodology, providing insights to improve georeferencing within the GeoBIM framework.@en