A. Scarpas
Please Note
164 records found
1
Pavement materials that could enhance the mechanical properties of open-graded porous asphalt mixtures in long-term service periods could offer a solution to produce long-life pavements, causing a reduction of interventions' needs, as well as the associated disruptions to road users and user costs. One option to improve the longevity of open-graded porous mixtures is with the use of epoxy asphalt that, despite its high initial cost, offers enhanced longevity that might offset any future user and intervention costs. This study aimed to evaluate the durability of plant-produced epoxy-modified open-graded porous asphalt mixtures. A batch production plant was employed to produce loose mixtures, which were used to pave a test road in the Province of Gelderland, the Netherlands, and compact specimens in the laboratory. Control mixtures with a non-epoxy-modified asphalt binder were also produced in the same plant. The durability of laboratory- and field-compacted mixtures was evaluated by conducting indirect tensile tests before and after oven conditioning. Results illustrated that the epoxy-modified asphalt demonstrated the highest strength and stiffness values, while the strength was reduced after conditioning in a water bath with the retained strength within the allowable specification limits. This attribute was confirmed from drill cores obtained from the test road after one year in service. Also, the materials compacted in the field had slightly higher strength and stiffness values than the laboratory-produced mixtures. Although the results provided have illustrated the improvement of durability of open-graded porous asphalt with implementing epoxy modification, further evidence from the test road over the years is needed for validation.
This study presents finite element (FE) modelling of tire pavement interaction based on a micromechanical pavement surface. The FE model of the pavement surface is created using CT scan images of an actual pavement specimen to accurately represent the micromechanical surface morphology of the pavement. The micromechanical FE model of the pavement consists of aggregate, binder, and air voids. Using the micromechanical pavement model, tire pavement interaction simulations are performed using ABAQUS by setting binder and rubber as viscoelastic materials and aggregate as an elastic material. Moreover, the FE model includes layers of asphalt, base course, and subgrade to mimic a real pavement. The interaction between tire and the pavement surface is modelled via the surface-to-surface contact.
The structural evaluation of existing pavements forms the basis for formulating cost-effective maintenance and rehabilitation strategies. A promising tool for pavement structural evaluation at network level is the Traffic Speed Deflectometer (TSD) test. However, the application of the TSD test is hindered by the lack of a robust and efficient parameter identification technique. To solve this problem, a theoretical model for the TSD test is first formulated. Then, a minimisation algorithm which works best with the theoretical TSD model for parameter identification is selected. Finally, the performance of this combination in processing field TSD measurements is studied. The results show that the modified Levenberg-Marquardt algorithm using all the 9 detection points is most suitable to be combined with the theoretical TSD model for parameter identification, which gives a promising parameter identification technique for TSD tests of pavements. The presented work contributes to the development of technologies for pavement structural evaluation.
Membranes of sufficient bonding characteristics could improve the integrity of the multi-layer structures on orthotropic steel deck bridges (OSBDs), enhancing thus the structural response of these systems and, ultimately, their service life. In this research, full-scale experiments were performed at the LINTRACK accelerated pavement testing facility of the Delft University of Technology to evaluate the performance of two surfacing systems commonly used in the Netherlands, giving emphasis on assessing the interface response of membranes with the surrounding materials. Results indicated that the tensile strains remain almost uniform at the top of porous asphalt, in both transverse and longitudinal directions, as no appreciable loss in stress-carrying capabilities was seen even at the end of the testing program. The sections exhibited similar behaviour in terms of strains, with some differences in strains indicating the impacts of membranes at interfaces. The importance of membranes of the desired bonding characteristics was also reflected by the relative displacement measurements. The relative interlayer slip had been higher in the transverse direction than the longitudinal one, with slightly higher displacements in one of the test sections. Overall, no cracking was observed on either section, and the current findings support the use of membranes between surfacing layers on OSBDs.
Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. The current study aims to further improve the prediction accuracy of micromechanical models for CRMB by considering the interparticle interactions. To accomplish this goal, two different strategies were used. Firstly, the (n+1)-phase model was applied to the CRMB system by considering the multilayer properties of swollen rubber particles. Secondly, a new micromechanical scheme called the J-C model was used to account for the interparticle interaction issue. Results show that the (n+1)-phase models slightly increase the prediction accuracy but the underestimation of complex modulus at lower frequencies remains unsolved. The J-C model remedies the underestimation of modulus in the low-frequency range by other models and provides an overall improvement for the relative prediction accuracy by properly addressing the interparticle interactions from the perspective of particle configuration.
Asphalt mixtures with high porosities (known as porous asphalt (PA) mixes) are becoming a popular choice among road authorities as it provides better skid resistance while also reducing tire-pavement noises. Towards the design and manufacture of PA mix pavement, the evaluation of the mechanical properties of PA mixes is of great importance. To predict the mechanical properties of PA mixes, micromechanical models have been considered as an effective tool. In most research studies, continuum-based micromechanical models, i.e. the Self-consistent model, the Mori-Tanaka model, etc. are widely used to predict the stiffness of asphalt mixtures. However, the limitation of these models is that they cannot describe the characteristics of individual particles and thus they cannot provide accurate predictions. On the other hand, the discrete-based micromechanical model (DBMM) which simulates a granular material as an assembly of bonded particles seems to be a promising alternative. Limited research studies have focused on studying the utilization and the applicability of this model for asphalt mixes. Therefore, this paper aims to propose a framework to use DBMM and to evaluate its performance in estimating a PA mix's stiffness. Based on the obtained results, both the merits and limitations of this model were highlighted.
Bitumen ageing is one of the principal factors causing the deterioration of asphalt pavements. As bitumen ages, the pavement loses its ability to relax stresses during loading/unloading and thermal cooling process, thus the risk of cracking increases. Oxidation and ultraviolet (UV) radiation are believed to be the main factors that can cause bitumen ageing during pavement service life. The aim of this study is to evaluate the mechanical behavior of porous and dense asphalt pavements during field ageing. Pavement test sections were constructed in 2014 and are being exposed to actual environmental conditions since then. To investigate the effect of UV radiation on ageing, UV reflective glass-plates were utilized to cover part of the pavement surface. To study the evolution of the pavements’ mechanical properties, asphalt cores were collected from the test sections periodically (at one-year intervals). The changes in the stiffness modulus of the mixtures were determined via cyclic indirect tensile tests. The results show that the effect of mineral aggregate packing, and hence of air-void distribution and connectivity, on the ageing sensitivity (both thermal and UV ageing sensitivity) of the pavements with time was found to be significant, as the changes of the stiffness of the porous mixtures were greater than that of dense mixtures.
The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM software, developed based on linear elastic and Burger's viscoelastic constitutive equations. The macroscale parameters of asphalt mortar were characterized using the nonlinear regression analysis of master curves obtained from Dynamic Shear Rheometer (DSR) tests. The verification process of EVCM successfully indicated that the computations trends fall within the range of expected values for the typical asphalt mixture material. Further, a Superpave Gyratory Compaction (SGC) test was carried out and the obtained sample was scanned using X-ray Computed Tomography (X-ray CT) to capture the air void distributions. The DEM was utilized where digital samples were established to simulate the overall process of laboratory and field compaction. The simulation results showed that the model provided a comparable prediction of responses and demonstrated the capability of SGC to fabricate a representative sample. The influence of temperature on the asphalt compaction process was explored and the results implied that temperature decreasing adversely affects the compactability and dramatically increases the demanded compaction efforts which are consistent with the law of viscoelasticity. On the contrary, when the temperature is high, the asphalt binder becomes too fluid and roller loads will simply displace, or “shove” the mat rather than compact it. Tracking the change in the air voids proportion indicates that the motion of aggregates is rather compound. The aggregates flowed vertically downwards in line with the compacting orientation while moved horizontally outwards away from the center. The results demonstrated that the model effectively simulated the compaction process, the developed model, and can be considered as a useful tool. All in all, the findings confirm that the concept is technically practicable, affording the model a tremendous potential to help researchers understand the microstructural phases of asphalt mixture during the compaction.