Yasmine Mosleh
Please Note
71 records found
1
Despite the popularity of multidirectional laminates in many fatigue-prone design applications, there is still little understanding of how the adjacent plies’ fibre orientation affects interfacial crack (delamination) fatigue propagation. To expand our knowledge on this matter, we present a systematic experimental investigation of the delamination growth behaviour for different interfaces and under different opening modes. In mode I, off-axis plies (as in 90//0 and 45//0 interfaces) increase the effects of fibre bridging, shifting the Paris curves to higher strain energy release rates (SERR), and thus making the 0//0 results (highly) conservative. Instead, in the presence of mixed mode, the Paris curves of 0//0 interfaces were not conservative in case of low SERR and low crack growth rates. These effects need to be accounted for when predicting the fatigue behaviour of a multidirectional laminate.
This study comparatively investigates the in-plane compressive properties of 3D braided honeycomb composite core (3D-BHC) and 3D braided honeycomb-foam sandwich composite (3D-BHFSC). The effects of joint wall length on mechanical properties, energy absorption, and failure mechanisms were analyzed using quasi-static compression tests and 3D digital image correlation (3D-DIC). The results show that the maximum load and energy absorption of 3D-BHFSC increase with the number of free wall columns, while the failure displacement is primarily governed by free wall rows number. The addition of foam filling and face sheets to form sandwich structure (3D-BHFSC) significantly enhances structural performance: the maximum load approximately doubles compared with that of 3D-BHC, energy absorption improves by 1.7–1.8 times, and the in-plane compressive modulus rises by about 500 MPa. However, 3D-BHFSC exhibit reduced failure strains and displacements due to progressive damage accumulation. Strain-field analysis reveals shear-dominated failure modes in 3D-BHC, evolving into V-shaped or cross-shaped fractures in 3D-BHFSC. These findings unravel the interplay between honeycomb topology and sandwich performance and provide quantitative guidance for designing lightweight sandwich structures in aerospace, automotive, and defense applications.
FRP structures are subjected to a combination of environmental and mechanical loads that act in an interactive way, determining service life. This study investigates the isolated and combined effects of in-situ temperature and relative humidity on monotonic and tension-tension fatigue response of two flax/epoxy laminates ([0/90/0]S and [+45/-45]2S), benchmarked against equivalent GFRP laminates. Particular emphasis was given to stiffness evolution, strain accumulation, and hysteretic behaviour particularly energy dissipation. Increasing temperature consistently reduced stiffness, strength, and fatigue life for both flax FRP laminates, leading to downward shifts and tilts of the S–N curves. The effect of moisture alone was laminate-dependent: elevated moisture content reduced stiffness, strength and fatigue life in the shear-dominated [+45/-45]2S laminate, whereas the [0/90/0]S laminate showed increased fatigue life attributed to enhanced ductility and increased laminate strength. Combined elevated temperature and moisture content lead to reduced monotonic stiffness and strength whilst their effects on fatigue life were cumulative. The largest effect was observed for the [+45/-45]2S laminate, where fatigue life decreased by approximately three orders of magnitude. Across all hygrothermal conditions, energy dissipation was found to be an indicator of fatigue life with higher hysteretic energy dissipation per cycle correlated with reduced fatigue life. When assessed relative to baseline S–N behaviour, flax FRPs exhibit a proportional sensitivity to combined temperature and humidity comparable to GFRPs, indicating that flax composites are not disproportionately penalised under hot–wet fatigue loading.
Flexural Properties of 3D Braided Jute/Epoxy Composite Honeycombs
Structure–Property Relationships
An integrated molding composite honeycomb has been proposed, in which a seamless, 3D braided natural fiber cellular fabric serves as the reinforcement, with epoxy resin as the matrix. Three-point bending behaviors of the honeycomb, taking account of the effects of joint wall length and opening angle, were investigated. The fracture mechanisms during bending were monitored using 3D Digital Image Correlation. The validated Finite element model was developed and used to perform a parametric analysis identifying the effect of material Young's modulus and geometric variations on the flexural stiffness. The results reveal that fracture occurs at the junction of the joint wall and the free wall, characterized by shear-type failure and structural geometry parameters significantly affect flexural performance. Decreasing the joint wall length from 55 to 4 mm in 90° honeycombs reduced the maximum load by approximately 26% and the flexural stiffness (P/y) by about 55%, accompanied by an increase in maximum deflection. Conversely, for specimens with a 17 mm joint wall, increasing the opening angle from 60° to 120° decreased the maximum load and P/y by approximately 32% and 55%, respectively, while the flexural deflection gradually increased. The knowledge generated from this study is key in design and performance evaluation of 3D braided composite honeycomb cores for sandwich structures, which is crucial for enhancing the out-of-plane bending resistance of sandwich structures.
This study investigates unidirectional flax fibre composites with epoxy (EP) and partially bio-based unsaturated polyester (UP) matrices conditioned to three humidity conditions (20%RH, 50%RH, and 85%RH) to assess how the resin system influences mechanical performance under hygroscopic exposure. Specimens were subjected to quasi-static tension, flexion, and tension-tension fatigue. Moisture uptake was observed to strongly influence both the quasi-static and fatigue behaviour of the flax fibre composites. Increasing the relative humidity from 20% to 85% led to a reduction in both tensile and flexural modulus, with decreases of approximately 12% for EP-Flax and about 24% for UP-Flax. The modulus measured during fatigue decreased by approximately 25% for both composites with increasing humidity. The effect of humidity on fatigue life depended on the matrix system, with EP-Flax exhibiting greater fatigue resistance than UP-Flax. Increasing humidity also increased hysteresis energy, loss factor and residual strain, indicating greater irreversible deformation. Interrupted cross-sectional microscopy revealed earlier fibre-bundle cracking in UP-Flax and a humidity-dependent shift towards cracking within individual fibres. Post-fatigue fibre pull-out also increased with humidity, indicating reduced interfacial resistance. These apparently competing effects suggest that, in the fibre-dominated EP-Flax laminates, increased deformation capacity and stress redistribution can delay final failure despite partial interfacial degradation.
Given the long-term use of carbon fibre reinforced polymers (CFRP) in harsh environments, this study investigates the isolated and combined effects of temperature and moisture variations on mode I fatigue delamination propagation. Several levels of temperature and relative humidity were applied as preconditioning and as in-service during fatigue testing to evaluate their effects on the Paris curve. In addition, statistical analyses, including analysis of variance (ANOVA), semi-empirical interpolation modelling, and fractographic assessments, were conducted to provide a comprehensive understanding of the failure mechanisms. The results indicate that the moisture absorbed during hygrothermal preconditioning and the in-service temperature applied during fatigue test individually affect the Paris curve slope. These factors interact synergistically, significantly altering the fatigue crack growth rate. An empirical model capturing this interaction showed good agreement with experimental data, enabling reliable prediction of environmental degradation trends. Fractographic evidence supported the observed changes in fracture patterns, linking changes in fibre bridging formation, surface roughness, and energy dissipation to the observed shifts in fatigue behaviour.
Morphological analysis of inosculated connections in weeping figs
Insights on density, geometry, fiber structures, and compositional variations
The present work experimentally explored the various effects of fibre orientation on fatigue delamination growth in the different fracture modes. IM7/8552 carbon fibre epoxy prepreg (Hexcel), a material system commonly adopted in aerospace field, was tested under mode I Double Cantilever Beam (DCB), mode II End-Loaded Split (ELS), and Mixed-Mode Bending (MMB) tests. For all cases a combination of different interfacial fibre orientations were tested and the crack growth rate curves were compared in relation to the observed fracture behaviour.
...
The present work experimentally explored the various effects of fibre orientation on fatigue delamination growth in the different fracture modes. IM7/8552 carbon fibre epoxy prepreg (Hexcel), a material system commonly adopted in aerospace field, was tested under mode I Double Cantilever Beam (DCB), mode II End-Loaded Split (ELS), and Mixed-Mode Bending (MMB) tests. For all cases a combination of different interfacial fibre orientations were tested and the crack growth rate curves were compared in relation to the observed fracture behaviour.
Therefore, this study proposes a novel methodology to estimate fatigue energy dissipation in FRP composites using only monotonic test data. The approach introduces the total work ratio (RW,tot), defined as the ratio between the cumulative dissipated work and the cumulative applied work over the fatigue life. Provided the applied work can be determined, based on material stiffness and loading parameters, RW,tot enables estimation of fatigue energy dissipation. Because the method is grounded in monotonic experiments, it inherently captures material-specific dissipative mechanisms.
The methodology is validated through experimental testing on a [0/90/0] glass FRP laminate and two flax fibre-reinforced biocomposite laminates: [0/90/0]S and [(+45/−45)2]S. Fatigue results indicate a linear dependence of RW,tot on the applied stress level that interestingly align with monotonic results. For the [0/90/0]S flax composite, this linear relationship intersects the origin, allowing direct estimation of RW,tot in fatigue solely from monotonic data under matched strain rates. In contrast, the [(+45/−45)2]S laminate does not exhibit origin-crossing linearity, potentially due to time-dependent mechanisms such as viscoelastic creep.
While further investigation is required to generalise the method across diverse laminate architectures, the findings highlight a simple, experimentally grounded, and physically interpretable approach for estimating energy dissipation in fatigue of FRP composites, potentially enabling more efficient fatigue life prediction.
...
Therefore, this study proposes a novel methodology to estimate fatigue energy dissipation in FRP composites using only monotonic test data. The approach introduces the total work ratio (RW,tot), defined as the ratio between the cumulative dissipated work and the cumulative applied work over the fatigue life. Provided the applied work can be determined, based on material stiffness and loading parameters, RW,tot enables estimation of fatigue energy dissipation. Because the method is grounded in monotonic experiments, it inherently captures material-specific dissipative mechanisms.
The methodology is validated through experimental testing on a [0/90/0] glass FRP laminate and two flax fibre-reinforced biocomposite laminates: [0/90/0]S and [(+45/−45)2]S. Fatigue results indicate a linear dependence of RW,tot on the applied stress level that interestingly align with monotonic results. For the [0/90/0]S flax composite, this linear relationship intersects the origin, allowing direct estimation of RW,tot in fatigue solely from monotonic data under matched strain rates. In contrast, the [(+45/−45)2]S laminate does not exhibit origin-crossing linearity, potentially due to time-dependent mechanisms such as viscoelastic creep.
While further investigation is required to generalise the method across diverse laminate architectures, the findings highlight a simple, experimentally grounded, and physically interpretable approach for estimating energy dissipation in fatigue of FRP composites, potentially enabling more efficient fatigue life prediction.
In-plane compressive properties of 3D braided jute/epoxy composite honeycombs
Structure-property relationships
Additionally, the pre-creeping and fatigue interruptions were found to substantially impact fatigue life, particularly in laminates with yarn twist, leading to a 1.7-fold increase due to interruptions and a threefold increase following pre-creeping. The latter also yielding a near-elimination of strain accumulation. Therefore, pre-creeping is proposed as an effective strategy to reduce in-service strain accumulation and extend fatigue life in predominantly UD flax FRPs with twisted yarns. ...
Additionally, the pre-creeping and fatigue interruptions were found to substantially impact fatigue life, particularly in laminates with yarn twist, leading to a 1.7-fold increase due to interruptions and a threefold increase following pre-creeping. The latter also yielding a near-elimination of strain accumulation. Therefore, pre-creeping is proposed as an effective strategy to reduce in-service strain accumulation and extend fatigue life in predominantly UD flax FRPs with twisted yarns.