(Bio)fouling is the most common problem in membrane processes used in water production. It is also a reported unavoidable problem, with mitigation strategies being frequently ineffective in addressing this problem. An ultrapure water plant (UPW) in Emmen (The Netherlands), fed with secondary effluent, comprises the following subsequent treatment steps: ultrafiltration (UF), biological oxygen-dosed activated carbon (BODAC) filtration and reverse osmosis (RO). The BODAC filters were designed to prevent fouling in RO membranes, and for ten years, they have been operated without significant fouling issues. The present work aims to provide insight into the role of the full-scale UF + BODAC in fouling prevention, by conducting a mass balance (MB) analysis to assess the removal/release of common fouling precursors. Positive MB results were noticed for particulate organic compounds, iron (Fe) and manganese (Mn) meaning their constant removal in the UF + BODAC. The UF + BODAC was shown to be an effective nitrification system, effectively converting all the ammonium and nitrite to nitrate. In conclusion, the combined removal of organics, Fe, and Mn species and nitrification by UF + BODAC is most likely an important factor in downstream fouling prevention, making this system an attractive process for fouling prevention. Nevertheless, further investigations to discover the mechanisms involved are needed.

@en

Canals and canalized rivers form a major part of surface water systems in European delta cities and societal ambitions to use these waters increase. This is the first assessment of how suitability of these waters can improve for three important uses: transportation, thermal energy extraction (TEE) and recreation. We assess suitability with Suitability Indices (SIs) and identify which alterations in the water system are needed to improve SI scores in Amsterdam, The Netherlands, and Ghent, Belgium. The results show spatial variability in suitability scores. Current suitability for transportation is low (SI score = 1) to excellent (SI score = 4), for TEE fair (SI score = 2) to excellent (SI score = 4), and suitability for recreation is low (SI score = 1). Suitability could improve by enlarging specific waterway dimensions, increasing discharge and clarity, and by enhancing microbiological water quality. The same methodology can be applied to optimize designs for new water bodies and for more water uses.

@en

The combined effect of climate change, rapid industrialisation and traditional water use has created freshwater stress situations in industrial delta regions. Alternative Water Sources (AWSs) offer opportunities to mitigate the freshwater stress issue and, thus, contribute to a sustainable industrial future. This study developed a Decision Support Model (DSM) to assist the decision-makers in selecting the most feasible AWS. In the study location, Tan Thuan Export and Processing Zone (TTZ) of Ho Chi Minh City, rainwater, industrial effluent and brackish water were selected as AWS options and evaluated for technical, environmental, economic, social and institutional criteria. The stakeholder organisations representing government organisations, industrial-zone management organisations and enterprises were selected as decision-makers based on their willingness to explore AWSs. Four DSM scenarios were derived from the varying decision-making power of the selected stakeholder organisations. The results obtained from applying DSM in TTZ showed rainwater as the most feasible AWS for all the scenarios, while the rank of other AWSs fluctuated for different scenarios. To implement the result of DSM in practice, the government should not only focus on formulating clear technological guidelines on AWS quality but also on providing subsidies and creating an environment of social acceptance of AWSs. The DSM allows the decision-makers to determine the most capable AWS in mitigating freshwater stress issues and the changes required to shift towards these AWSs.@en

Urban surface waters are used in many different ways. With increasing demand for human use functions, improved insight is required into the functional quality of these waters. A method to assess this functional quality in a systematic way and for a wide variety of use functions is not available. We propose to use suitability indices (SIs) for assessing the suitability of urban water bodies for a variety of specific human uses. This study provides a new protocol for this, building on the water quality index and ecosystem services approaches in literature, by extending traditional water quality parameters with other characteristics of water bodies that determine suitability for a specific use function. By assessing suitability instead of traditional water quality, the functional quality of a water body for all kinds of uses can be determined in a consistent way. The protocol was demonstrated to be effective in developing SIs for three specific urban water use functions, namely: thermal energy extraction, transportation of goods and primary contact recreation. Application of the suitability indices in a case study in the city of Amsterdam, The Netherlands, resulted in spatially explicit information about suitability of surface waters for the three selected use functions. Sub-scores per parameter showed which characteristics of the urban water bodies should be changed to improve the suitability for these three functions. In this way, the SI approach for assessment of the functional quality of urban surface waters can be used to support function-oriented planning, design and maintenance of urban surface water systems.

@en

Scientific literature currently lacks comprehensive understanding of urban surface water use functions. This hampers sound analysis of the demand and potential supply of these functions. This study provides a comprehensive overview of potential use functions, by integrating knowledge from ecosystem services and integrated urban water management fields. Analysis of water-related management plans for Toronto and Amsterdam shows that surface water is currently being used for a variety of functions related to nutrition, energy, water regulation, recreation, symbolic use, transportation and floating buildings. Notably, many use functions involve in situ use, rather than water extractions. Interviewed water managers and spatial planners in both cities expect demand of most use functions to increase by 2040, especially demand for thermal energy extraction, recreation and transportation. Some identified novel demands, such as climate regulation and reuse of waste products from waterway maintenance. Increasing demand is mainly driven by urban growth, climate change and sustainability ambitions. This study found urban surface water uses that are usually not acknowledged in scientific literature on urban water management. This comprehensive overview supports planning, design, and maintenance of urban surface waters, laying the foundation for future research on supply and demand of urban water use functions.

@en

Land subsidence in low-lying peatlands can be caused by shrinkage and organic matter oxidation. When these areas have networks of ditches and canals for drainage purposes, the sediments that accumulate in the waterways can be used to reverse the process of land subsidence. The objective of this study is to understand how dredged sediments can be used to reverse the process of land subsidence by analysing the contribution of shrinkage and organic matter mineralization to the subsidence observed in an upland deposit. A deposit of dredged sediments in the Wormer- en Jisperveld—North Holland, the Netherlands—was characterized during 17 months in terms of subsidence of the sediments, subsidence of the soil underlying the deposit, geotechnical water content, organic matter content, type of organic matter and nutrients. The deposit was filled to a height of 195 cm, and after 17 months, the subsidence of the sediments was 88 cm. In addition, a subsidence of 19.5 cm of the underlying soil was observed. Subsidence could be attributed to shrinkage since no significant changes in the organic matter content and total organic carbon were observed. The type of organic matter changed in the direction of humification until winter 2014, stabilized from winter 2014 to spring 2015 and changed in the direction of mineralization after the spring of 2015. Subsidence of dredged sediments in upland deposits is caused by shrinkage during the first 17 months. The solution of spreading thinner layers of sediments over the land to decrease the subsidence rates should be explored since the pressure of the deposit on the underlying soil caused an extra subsidence of 19.5 cm.

@en

Purpose: In delta areas, dense networks of canals have been developed through time and have to be periodically dredged. Lowering the groundwater level in delta areas deepens the aerobic zone, leading to the oxidation of organic matter and possibly to land subsidence. The use of the dredged sediments on land can be a solution to mitigate land subsidence in delta areas. Materials and methods: Five types of dredged sediments with different organic matter content and particle size distribution were dewatered for 7 days and then submitted to biochemical ripening during 141 days on a laboratorial scale with constant temperature and relative humidity. The functional properties analysed were the type and content of organic matter, pH, total C, N, P and S, dry bulk density, water retention capacity, aggregate stability and load-bearing capacity. Results and discussion: After biochemical ripening, there was no significant loss in the mass of organic matter but there was an increase in the fraction of stable organic compounds, observed by an increase in oxygen-bearing compounds and a decrease in hydrocarbons during biochemical ripening. The pH was not affected by biochemical ripening, and the total C, N, P and S concentrations are high and therefore the dredged sediments can improve the quality of the land. Most volume lost during dewatering and biochemical ripening can be attributed to the loss of water. The water retention capacity of the dredged sediments changed with biochemical ripening. The soils formed from biochemical ripening have very stable aggregates, and its load-bearing capacity is enough to sustain cattle and tractors. Conclusions: Most volume lost during dewatering and biochemical ripening can be attributed to the loss of water and not organic matter. Therefore, the studied dredged sediments have potential to mitigate land subsidence in delta areas when spread on land.

@en

Sustainable urban resource management depends essentially on a sound understanding of a city’s resource flows. One established method for analyzing the urban metabolism (UM) is the Eurostat material flow analysis (MFA). However, for a comprehensive assessment of the UM, this method has its limitations. It does not account for all relevant resource flows, such as locally sourced resources, and it does not differentiate between flows that are associated with the city’s resource consumption and resources that only pass through the city. This research sought to gain insights into the UM of Amsterdam by performing an MFA employing the Eurostat method. Modifications to that method were made to enhance its performance for comprehensive UM analyses. A case study of Amsterdam for the year 2012 was conducted and the results of the Eurostat and the modified Eurostat method were compared. The results show that Amsterdam’s metabolism is dominated by water flows and by port-related throughput of fossil fuels. The modified Eurostat method provides a deeper understanding of the UM than the urban Eurostat MFA attributed to three major benefits of the proposed modifications. First, the MFA presents a more complete image of the flows in the UM. Second, the modified resource classification presents findings in more detail. Third, explicating throughput flows yields a much-improved insight into the nature of a city’s imports, exports, and stock. Overall, these advancements provide a deeper understanding of the UM and make the MFA method more useful for sustainable urban resource management. @en