The chemical irreversible hardening of epoxy modified bitumen is affected by various physical factors and the successful application of this technology is directly linked with full understanding of chemo-rheological material characteristics. This study proposes a model to describe the material viscosity evolution during hardening of epoxy modified bitumen. The findings from numerical analyses performed to assess the mechanical response of epoxy modified bituminous binders are presented. Information of the chemical interaction of epoxy within a bituminous matrix was collected and all the influential factors have been determined. The proposed chemo-rheological model accounting for the polymerization of the epoxy in the bitumen was formulated and the sensitivity of material parameters, such as activation energy, reaction order and extent of hardening reaction until the gel point of epoxy modified binders, was demonstrated. Results of the analyses suggest that lower levels of activation energy increase the degree of hardening and the rate of viscosity development. By decreasing the hardening reaction until the gel point the achieved viscosity of epoxy modified bitumen was increased showing the importance of gel reaction extent on material viscosity evolution. The numerical studies have shown also that the polymerization rate in the epoxy modified bitumen is highly dependent on the temperature under various (non-) isothermal conditions. Also, the polymerization rate should be considered through all the material curing processes to avoid unwanted variations in the mechanical properties.

@en

Epoxy modified bitumen (EMB) is a promising technology for long lasting paving materials ensuring higher resistance to rutting, oxygen- and moisture-induced damage. In this paper, an analysis of the chemical reactions that take place during the chemical hardening process (curing) of epoxy modified bitumen
was conducted by means of Fourier Transform Infrared (FT-IR) spectrometer. For various amount of epoxy resin modification in bitumen, the hardening process was evaluated under various conditions. The fluctuation of the most crucial chemical groups occurring during the hardening process was identified and discussed. After the interpretation of chemical hardening, the critical hardening conditions were determined and fatigue tests were performed by Dynamic Shear Rheometer (DSR). Comparison with the unmodified bitumen shows that the fatigue resistance of epoxy modified binders improved significantly with increasing the amount of the epoxy resin in bitumen.@en