As the installed capacity of individual turbines increases, so do costs associated with manufacture and maintenance. One proposed solution to this problem is the Multi-Rotor System (MRS) which utilises many small rotors to yield the same energy capture as a single large turbine. The operational advantage of the MRS is the built in redundancy between rotors on the same structure. However, despite this advantage, an increase in number of components is likely to result in an increase in transfers. This work examines the balance between additional crew and vessel requirements for such a structure against the expected savings in downtime due to redundancy and small rotor power rating. Three scenarios are analysed to determine the distribution of the failures which contribute to downtime. The study aims to find the optimal vessel fleet which limits downtime without drastically increasing direct operational expenditure (OpEx). As site size increases, the impact of global failures, which shut down the whole asset, is lessened. However, there is a significant increase in the number of vessels required to reduce downtime to <10% of the total OpEx. While a large fleet can offer significant downtime savings, there are practical limitations and challenges which must be acknowledged.

The upscaling of wind turbines results in fewer units per installed MW reducing infrastructure and maintenance costs of offshore wind farms. Multi rotor systems (MRS), comprising many wind turbine rotors on a single support structure, are potentially a means to maximize the upscaling benefit in achieving larger unit capacities than is feasible or economic with the conventional, 3-bladed horizontal axis wind turbine (HAWT). The MRS has an inherent upscaling advantage which, for a system with many rotors compared to a single rotor, reduces the total weight and cost of rotor-nacelle assemblies by a large factor. An innovative MRS design is presented based on vertical axis wind turbine (VAWT) rotors of the 2-bladed, H-type. Many disadvantages of VAWT design compared to HAWT in a single rotor system (reduced power performance and higher drive train torque, for example) are resolved in the MRS configuration. In addition, reduced component number and simpler components is advantageous for reliability and O&M cost. This MRS concept has many synergies arising from the choice of VAWT rotors. Results comprise a high-level evaluation of system characteristics and the first stage of more detailed investigation of aerodynamics of the high aspect ratio VAWT.

This paper represents an expert view from Europe of future emerging technologies within the wind energy sector considering their potential, challenges, applications and technology readiness and how they might evolve in the coming years. These technologies were identified as originating primarily from the academic sector, some start-up companies and a few larger industrial entities. The following areas were considered: airborne wind energy, offshore floating concepts, smart rotors, wind-induced energy harvesting devices, blade tip-mounted rotors, unconventional power transmission systems, multi-rotor turbines, alternative support structures, modular high voltage direct current generators, innovative blade manufacturing techniques, diffuser-augmented turbines and small turbine technologies. The future role of advanced multiscale modelling and data availability is also considered. This expert review has highlighted that more research will be required to realise many of these emerging technologies. However, there is a need to identify synergies between fundamental and industrial research by correctly targeting public and private funding in these emerging technology areas as industrial development may outpace more fundamental research faster than anticipated.