Circular Image

Z. Qian

info

Please Note

6 records found

Alkali-activated concrete (AAC) is a sustainable alternative to ordinary Portland cement concrete, but its large-scale structural performance remains insufficiently understood, particularly in terms of long-term durability. To ensure safe application, continuous monitoring of AAC structures is essential. This paper develops and validates ultrasonic-based damage indicators (DIs) intended to support future lifetime monitoring of precast AAC bridge members. Full-scale laboratory tests were performed on two prestressed AAC beams and a solid slab consisting of three beams with embedded piezoelectric sensors. Active ultrasonic measurements collected throughout loading were processed to derive two DIs: (1) reduction in waveform coherency using direct wave interferometry to indicate crack initiation, and (2) relative wave velocity obtained from an arrival-time picker to track crack propagation. The waveform coherency-based DI consistently identified the onset of cracking at or even before the first visible cracks appeared in digital image correlation (DIC) images, while the velocity-based DI provided a qualitative measure of crack propagation and orientation. Both indicators responded sensitively once degradation developed, enabling early warning of structural deterioration. The validated DIs are intended to inform the development of a lifetime monitoring scheme on a pilot precast AAC bridge on a Dutch national road. This study also provides a practical pathway toward risk-informed operation and broader adoption of AAC in bridge applications. ...
Book chapter (2026) - Mladena Lukovic, Zhenxu Qian, Jelle Bezemer, Arkamitra Kar, Choi Lin Chan, Mingzhong Zhang, Frank Dehn, Guang Ye
The increasing demand for sustainable development in engineering practice has triggered researchers to explore solutions to reduce the CO2 footprint caused by Portland cement (PC) production. Alkali-activated concrete (AAC), made by alkali activation of industrial by-products, poses to be a sustainable alternative to traditional Portland cement concrete. Despite vast studies on its material properties, there is still insufficient knowledge on the structural performance of reinforced AAC members, which impedes its widespread application. Bond between concrete and embedded reinforcement is critical for the structural behaviour of reinforced members, including crack propagation (crack opening and crack spacing), load carrying capacity, deformational capacity and seismic resistance. In this chapter, a critical review on the bond behaviour between AAC and reinforcement is given. A vast variety of tests have been used for studying the AAC-reinforcement bond. Similar to traditional PC concrete, different setup configurations and specimen geometries affect not only the measured bond strength, but also the nature of the bond response. Therefore, in this review different bond tests are discussed, focusing on application of both conventional steel and fibre reinforced polymer (FRP) as reinforcement. Given that AAC is a wide class of materials with largely varying mechanical properties, this study systematically classifies bond results based on different types of precursors used. Furthermore, numerical methods to predict AAC flexural response as well as the applicability of existing PC concrete design codes are summarized. It is concluded that AAC beams show comparable short-term bond behaviour with traditional PC concrete of the same strength class. Although the design codes for traditional concrete turn out to be usually applicable for the AAC-reinforcement bond, opposite trends were also reported. Finally, whereas the short-term behaviour has been widely investigated for AAC bond, systematic studies dealing with its long-term behaviour are lacking. Time dependent effects must be considered when developing reliable guidelines and recommendations for future structural design of AAC. ...
Doctoral thesis (2026) - Z. Qian, M. Lukovic, G. (Guang) Ye, E.O.L. Lantsoght
Alkali-activated concrete (AAC) is a promising sustainable alternative to Portland cement concrete (PCC), as it can reduce the environmental impact associated with cement production. However, the structural behaviour of AAC members, especially prestressed members, remains unknown. Certain AAC mixtures, especially those made from high-calcium precursors, can exhibit reduced mechanical properties under drying, along with significant shrinkage and creep, affecting the long-term performance of AAC structural members. The primary aim of this thesis is to investigate the time-dependent flexural behaviour of reinforced and prestressed AAC members, focusing on the influence of curing/exposure conditions.
Material and structural behaviour of self-compacting AAC (SCAAC) was tested. The material tests showed that SCAAC was sensitive to drying. Exposure to drying led to decrease in splitting tensile strength and elastic modulus, while under continuous moist curing, compressive strength, splitting tensile strength and elastic modulus of SCAAC increased or remained constant. The reduction is attributed to drying-induced microcracking and carbonation. Free shrinkage and creep of SCAAC continued to increase over approximately 3 years and 1 year, respectively. Unlike SCAAC, the strength and elastic modulus of the reference PCC mixture increased or remained constant under drying.
Flexural behaviour of reinforced SCAAC beams was investigated at different testing ages. Drying-exposed SCAAC beams showed decrease in cracking load and stiffness over time, as well as larger maximum crack widths than the 28-day beam. Slightly smaller crack spacing was observed in drying-exposed SCAAC beams tested at later ages, which was not captured by the existing analytical models. The performance of moist-cured SCAAC beams and reference drying-exposed PCC beams was almost constant over time. The changes in the flexural behaviour of drying-exposed SCAAC beams were partially attributed to the evolution of elastic modulus and tensile strength. The shrinkage effects in reinforced beams also contributed to reductions in cracking load and stiffness, and to the increase in crack width. Considering these effects improved the analytical predictions of the flexural behaviour of drying-exposed SCAAC beams.
The time-dependent flexural behaviour of composite AAC girders comprising a precast prestressed girder and cast-in-situ topping, a common composite construction system in the Netherlands, was also studied. The experimental programme included 28-day flexural tests, deflection measurements of two specimens subjected to self-weight and additional sustained loading over 9 months, and subsequent flexural tests at 9 months. Similar to reinforced SCAAC beams, the 9-month composite girders exhibited reduced stiffness, decreased cracking load and larger crack widths compared to the 28-day specimen. The lower cracking load arose from prestress losses due to ongoing shrinkage and creep. Larger crack widths indicate a reduction of bond between AAC and prestressing strands over time. Distinct failure patterns were found in the 9-month specimens: anchorage failure for specimen subjected to self-weight only and flexural failure for specimen exposed to additional sustained load. This highlights the role of creep on the bond behaviour between prestressing strands and AAC, particularly as a function of varying stress at the level of strands. The prestress losses could be predicted analytically once the effects of restrained deformation (i.e. creep and shrinkage) between the precast girder and topping AAC were considered.
A numerical study was performed to investigate the influence of drying on the time-dependent behaviour of AAC. A staggered lattice modelling approach, combining lattice moisture and lattice fracture models, was applied to simulate moisture exchange, drying shrinkage-induced fracture, and fracture behaviour under external load. The simulations showed that drying led to concrete cracking, development of steel stresses, and bond reduction, thereby reducing the cracking load and stiffness of reinforced beams over time. The model could well reproduce the experimental observations and provide further insights into shrinkage-induced stresses and damage.
This thesis addresses the knowledge gap regarding the long-term behaviour of AAC under exposure to drying (i.e. 20 ℃ and 50% RH). The study reveals that, for the investigated high-calcium AACs, 28-day tests do not provide a safe reference for design. The testing methods, including curing/exposure conditions before testing, and the analytical models used for PCC cannot be unconditionally adopted. Unlike for PCC, 28-day compressive strength cannot provide a safe reference for the design of AAC exhibiting pronounced time-dependent behaviour. Elastic modulus is more sensitive to internal changes (e.g. microcracking) and therefore can provide better insight into the long-term behaviour of AAC. The influence of restrained shrinkage and creep should be considered for structural members produced by such AAC.
Building on the obtained knowledge, recommendations are provided for mixture design and curing conditions, key tests, prediction methods and post-construction monitoring. These recommendations can further be adapted to other AAC mixtures and boundary conditions after validation and therefore provide a basis for developing more general guidance for AAC applications. ...
Journal article (2025) - Zhenxu Qian, Shizhe Zhang, Guang Ye, Stijn Matthys, Mladena Luković
Alkali-Activated Concrete (AAC) is considered as a promising alternative to conventional Portland Cement Concrete (PCC) due to its potential to reduce environmental impacts. However, its application in practical engineering is limited by, among others, insufficient understanding of the long-term structural behaviour of reinforced and prestressed AAC elements. To address this, a series of experiments were conducted on composite girders to investigate the long-term flexural behaviour. The composite girder is formed by a prefabricated prestressed AAC inverted-T girder with cast-in-situ ACC topping concrete. The midspan deflection of two composite girders, subjected to self-weight and additional sustained loading, were measured over a 9-month period. Subsequently, flexural tests under four-point bending configuration were performed at the age of 9 months and the reference age of 28 days. The results showed that the specimens tested at 9 months exhibited reduced initial stiffness, decreased cracking load and larger crack widths in the precast prestressed girder compared to those tested at 28 days. The reduction in stiffness likely stems from decreased elastic modulus and structural cracking. Meanwhile, the lower cracking load arises from prestress losses caused by ongoing (restrained) shrinkage and creep, consistent with AAC material test observations. Larger crack widths observed in the precast girder may result from a degradation of bond between AAC and prestressing strands over time. The distinct failure patterns of the 9-month specimens (anchorage failure for sample subjected to self-weight only and flexural failure for sample exposed to additional sustained load), highlighted the role of creep on bond behaviour between prestressing strands and AAC, particularly as a function of varying stress levels at the level of strands. Finally, analytical models were applied to evaluate the prestress loss and flexural behaviour of the specimens. The effective prestressing force and cracking loads at both testing ages were overestimated when the effects of (partially) restrained deformations between precast and cast-in-situ AAC were neglected. More accurate analytical predictions were achieved when these long-term effects and the level of restraint in the composite girder were considered. ...
Journal article (2023) - Bo Jiang, Zhenxu Qian, Dawei Gu, Jinlong Pan
Aimed at realizing the effective strengthening and durable repair of concrete structures, particularly in emergencies like traffic interruption triggered by broken roads and damaged bridges, nine groups of specimens were designed and tested in this paper to develop the high-early-strength Engineered Cementitious Composites (HES-ECC) featured as both high early-strength and superior long-term-deformability. The high-early-strength effect of sulphoaluminate cement, silica fume, and Portland cement on HES-ECC was compared, as well as their influence on the deformation ability of HES-ECC. Moreover, the interfacial behaviors between HES-ECC and existing concrete structure were clarified, considering the effects of interfacial agents, interfacial treatment methods, and interfacial roughness. The results indicate that HES-ECC with 6% silica fume mixed could obtain both the high early-strength and superior long-term-deformability. The flexural strength at 3 h could reach 66.67% of that at 28d. The compressive strength could reach up to 28.7 MPa at 3 h, and the ultimate tensile strain could remain 4.21% at 28d. Cement paste interfacial agent could enhance the chemical adhesive bonding between HES-ECC and existing concrete while polymer modified interfacial agent was incompatible. The increased roughness of chiseled interface was beneficial to both the bearing capacity and the deformation ability. Interfacial shear performance of the grooved interface was scarcely deteriorated even if the roughness decreased by 54.18% compared with the chiseled interface. The recommended interfacial treatment is chiseled interface combined with grooved interface, as well as a thickness of 1–2 mm cement paste interfacial agent. This study provides valuable and credible experimental data for promoting the application of HES-ECC in repairing existing concrete structures in practice. ...
Conference paper (2022) - Z. Qian, E.O.L. Lantsoght, M. Lukovic
The increasing demand for sustainable development in engineering practice has triggered researchers to explore solutions to reduce the CO2 footprint caused by ordinary Portland cement (OPC) production. Alkali-activated concrete (AAC), made of by-products using alkali activation, is of great potential as a promising alternative to conventional concrete (CC). Despite vast studies on its material properties, there is still insufficient scientific research on the structural performance of AAC, which impedes its widespread application. In this paper, an overview of the fundamental behavior of AAC beams under different loading conditions is presented. The experimental investigations on mechanical performance of AAC beams are reviewed in terms of ultimate capacity, ductility and cracking behavior. Moreover, numerical methods to predict AAC structural response as well as the applicability of existing CC design codes are summarized. It is concluded that AAC beams show comparable short-term behavior with CC counterparts. Besides, the design codes for CC turn out to be applicable but conservative for most steel-reinforced AAC beams. Though short-term flexural behavior has been widely investigated for AAC beams, the challenge remains to clarify shear behavior and long-term behavior. Furthermore, reliable guidelines are needed to be developed, providing recommendations for future structural design. ...