Although strain engineering and soft-clamping techniques for attaining high Q-factors in nanoresonators have received much attention, their impact on nonlinear dynamics is not fully understood. In this study, we show that nonlinearity of high-Q Si₃N₄ nanomechanical string resonators can be substantially tuned by support design. Through careful engineering of support geometries, we control both stress and mechanical nonlinearities, effectively tuning nonlinear stiffness of two orders of magnitude. Our approach also allows control over the sign of the Duffing constant resulting in nonlinear softening of the mechanical mode that conventionally exhibits hardening behavior. We elucidate the influence of support design on the magnitude and trend of the nonlinearity using both analytical and finite element-based reduced-order models that validate our experimental findings. Our work provides evidence of the role of soft-clamping on the nonlinear dynamic response of nanoresonators, offering an alternative pathway for nullifying or enhancing nonlinearity in a reproducible and passive manner.

Resonant sensors hold great promise in measuring small masses, to enable future mass spectrometers, and small forces in applications like atomic and magnetic force microscopy. During the last decades, scaling down the size of resonators has led to huge enhancements in sensing resolution, but has also raised the question of what the ultimate limit is. Current knowledge suggests that this limit is reached when a resonator oscillates at the maximum amplitude for which its response is predominantly linear. We present experimental evidence that it is possible to obtain better resolutions by oscillation amplitudes beyond the onset of nonlinearities. An analytical model is developed that explains the observations and unravels the relation between ultimate sensing resolution and speed. In the high-speed limit, we find that the ultimate resolution of a resonator is improved when decreasing its damping. This conclusion contrasts with previous works, which proposed that lowering the damping does not affect or even harms the ultimate sensing resolution.

In recent years, the Q-factor of Si 3 N 4 nanomechanical resonators has significantly been increased by soft-clamping techniques using large and complex support structures. To date, however, obtaining similar performance with smaller supports has remained a challenge. Here, we make use of torsion beam supports to tune the Q-factor of Si 3 N 4 string resonators. By design optimization of the supports, we obtain a 50% Q-factor enhancement compared to the standard clamped-clamped string resonators. By performing experimental and numerical studies, we show that further improvement of the Q-factor is limited by a trade-off between maximizing stress and minimizing torsional support stiffness. Thus, our study also provides insight into dissipation limits of high-stress string resonators and outlines how advanced designs can be realized for reaching ultimate f 0 × Q product while maintaining a small footprint.

For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there are remarkable strides in achieving low-dissipation mechanical sensors by utilizing high tensile stress, the performance of even the best strategy is limited by the tensile fracture strength of the resonator materials. In this study, a wafer-scale amorphous thin film is uncovered, which has the highest ultimate tensile strength ever measured for a nanostructured amorphous material. This silicon carbide (SiC) material exhibits an ultimate tensile strength of over 10 GPa, reaching the regime reserved for strong crystalline materials and approaching levels experimentally shown in graphene nanoribbons. Amorphous SiC strings with high aspect ratios are fabricated, with mechanical modes exceeding quality factors 10⁸ at room temperature, the highest value achieves among SiC resonators. These performances are demonstrated faithfully after characterizing the mechanical properties of the thin film using the resonance behaviors of free-standing resonators. This robust thin-film material has significant potential for applications in nanomechanical sensors, solar cells, biological applications, space exploration, and other areas requiring strength and stability in dynamic environments. The findings of this study open up new possibilities for the use of amorphous thin-film materials in high-performance applications.