As Autonomous Surface Vessels (ASVs) become increasingly prevalent in marine applications, ensuring their safe operation, in the presence of faults, is crucial to human safety. This paper presents a scheme that encompasses the detection and isolation of actuator faults within ASVs to ensure uninterrupted and safe operation. The method primarily addresses the loss of thruster effectiveness as a specific actuator fault. For fault detection, the proposed method leverages residuals generated by nonlinear observers, coupled with adaptive thresholds, enhancing fault detection accuracy. The active fault isolation strategy employs actuator redundancy to insulate specific system states from faults by dynamically reconfiguring the actuation configuration in response to detected faults. Comprehensive simulation results demonstrate the effectiveness of this methodology across diverse marine traffic scenarios where the ASV needs to perform a collision avoidance maneuver.

As inland waterway usage intensifies, it increasingly intersects and conflicts with railway and road transportation modes, highlighting the need for efficient management of these critical junctures. In particular, movable bridges represent a key intersection of highway and waterway Traffic but also a potential source of conflict. This paper proposes and analyzes the use of automatic schedulers that consider both highway and waterway Traffic, reduce conflicts, and make key decisions about bridge use. The METANET macroscopic Traffic model is elaborated to allow the simulation of drawbridge openings on the highway mainline, based on the modelling of mainstream metering. Several MPC-based schedulers are proposed using the designed highway Traffic model and key vessel information, aiming to study the impact of the bridge opening and scheduling on highway Traffic. The simulation results indicate a significant reduction in Traffic conflicts at drawbridge intersections due to the implementation of these schedulers. The functioning of the schedulers is shown to be robust and demonstrate verifiable behavior, indicating their high potential in real-world applications.

This paper proposes a greedy stochastic optimization algorithm for the sensor set decomposition used in the sensor fault monitoring of marine propulsion systems, based on fault isolability criteria. These criteria are expressed mathematically in terms of the number of unique columns in the theoretical fault signature matrices (FSMs) used during the sensor fault isolation process. Due to the large scale and complexity of marine propulsion plants, the diagnostic layer follows a distributed architecture with a combinatorial logic used for fault isolation in two cyber levels; the local and global decision logic. As a result, the FSMs of both levels are formulated as an integrated optimization problem. Each solution regarding the sensor set decomposition is then used to generate the respective distributed monitoring architecture, using semantic (qualitative) knowledge for the propulsion plant. Thus, the need for an analytical model of the plant is removed. Moreover, based on the design of the distributed monitoring architecture, the respective theoretical FSMs (quantitative) are Automatically generated and used for the evaluation of the objective function. Finally, simulation results are used to illustrate the application of the greedy stochastic optimization algorithm and its efficiency.

This paper presents a rule-compliant trajectory optimization method for the guidance and control of Autonomous Surface Vessels. The method builds on Model Predictive Contouring Control and incorporates the International Regulations for Preventing Collisions at Sea relevant to motion planning. We use these rules for traffic situation assessment and to derive traffic-related constraints that are inserted in the optimization problem. Our optimization-based approach enables the formalization of abstract verbal expressions, such as traffic rules, and their incorporation in the trajectory optimization algorithm along with the dynamics and other constraints that dictate the system's evolution over a sufficiently long planning horizon. The ability to plan considering different types of constraints and the system's dynamics, over a long horizon in a unified manner, leads to a proactive motion planner that mimics rule-compliant maneuvering behavior, suitable for navigation in mixed-traffic environments. The efficacy and scalability of the derived algorithm are validated in different simulation scenarios, including complex traffic situations with multiple Obstacle Vessels.

This article proposes a distributed model-based methodology for the diagnosis of faults affecting multiple sensors used for condition monitoring and control of marine internal combustion engines (ICEs). To handle the complexity of the ICE, we consider it as a set of interconnected physical subsystems that constitute the physical layer. For every subsystem, the detection of sensor faults relies on the design of cyber agents, where every agent monitors one subsystem. To handle the heterogeneous dynamics of each subsystem in the fault detection decision-making process, each agent uses differential and algebraic residuals alongside adaptive bounds. For isolation purposes, a combinatorial decision logic is employed, realized in two cyber levels: the local and the global decision logic. The first aims at the recognition of all sensor fault patterns that might have affected the engine based on the local agent fault signatures and certain binary decision matrices. The latter is used to capture the propagation of sensor faults between the different monitoring agents. Simulation results are used to showcase the proposed methodology's efficiency in tackling the problem and its applicability.

To integrate and assist the system and automation design phases of complex marine vessels, this paper proposes a two-level semantically enhanced scheme. At the design level, the system components are described and automatically connected by a developed graph-making tool using semantic 'knowledge'. Decisions regarding the system selection are made based on certain Quality of Service Criteria (QoS) and enforced in the final semantic database using a dedicated cognitive agent. The automation level leverages the selected systems semantic information with that of the associated automation components and reuses the graph-making tool to update the connection graph. The resulting knowledge-graph is then used to 'reason' for the creation of feasible closed-loop control architectures while a cognitive agent determines which closed-loop architecture to use based on various QoS criteria. The chosen closed-loop architecture can then change in an online manner during the vessel operation in case that system reconfiguration is required either due to malfunctioning components, or aiming to satisfy mission's goals. The applicability and efficiency of the proposed method are shown using a case study for marine propulsion.

This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor.

The regulatory endorsement of the International Maritime Organization (IMO) and the support of pivotal shipping market players in recent years motivate the investigation of the potential role that autonomous vessels play in the shipping industry. As the complexity and scale of the envisioned applications increase, research works gradually transform the focus from single-vessel systems to multi-vessel systems. Thus, autonomous multi-vessel systems applied in the shipping industry are becoming a promising research direction. One of the typical research directions is floating object manipulation by multiple tugboats. This paper offers a comprehensive literature review of the existing research on floating object manipulation by autonomous multi-vessel systems. Based on the prior knowledge of object manipulation problems in multi-robot systems, four typical ways of maritime object manipulation are summarized: attaching, caging, pushing, and towing. The advantages and disadvantages of each manipulation way are discussed, including its typical floating object and application scenarios. Moreover, the aspects of control objective, control architecture, collision avoidance operation, disturbances consideration, and role of each involved vessel are analyzed for gaining insight into the approaches for solving these problems. Finally, challenges and future directions are highlighted to give possible inspiration.

Transportation of a large offshore platform from inland waters to the open sea is a hazardous and challenging mission. With the development of the autonomous surface vessel (ASV), the problem of large floating object transportation has a chance to be solved by applying multiple physical-connected autonomous tugboats. This article proposes a distributed dynamic coordination control scheme for a multivessel autonomous towing system to transport an offshore platform under environmental disturbances. Where the dynamic coordination decision mechanism is based on the relative position of the two neighbor waypoints, the controllers are designed based on the multilayer model-predictive control (MPC) strategy with several specific cost functions, and the distributed control architecture is built based on the alternating direction method of multipliers (ADMM) with augmented Lagrangian function. The simulation experiment indicates that the proposed control scheme can achieve better consensus for the distributed control architecture accomplishment and more efficiently transport an offshore platform under environmental disturbances.

Autonomous surface ships have become increasingly interesting for commercial maritime sectors. Before deep learning (DL) was proposed, surface ship autonomy was mostly model-based. The development of artificial intelligence (AI) has prompted new challenges in the maritime industry. A detailed literature study and examination of DL applications in autonomous surface ships are still missing. Thus, this article reviews the current progress and applications of DL in the field of ship autonomy. The history of different DL methods and their application in autonomous surface ships is briefly outlined. Then, the previously published works studying DL methods in ship autonomy have been categorized into four groups, i.e., control systems, ship navigation, monitoring system, and transportation and logistics. The state-of-the-art of this review paper majorly lies in presenting the existing limitations and innovations of different applications. Subsequently, the current issues and challenges for DL application in autonomous surface ships are discussed. In addition, we have proposed a comparative study of traditional and DL algorithms in ship autonomy and also provided the future research scope as well.

Nowadays, marine vessels constitute safety-critical assets facilitating the transport of millions of passengers and tons of cargo worldwide. As such, they require a large number of heterogeneous sensors dispersed in the various on-board machinery for operational and condition monitoring of their vital systems, such as the propulsion system. Despite the vast availability of data from on-board sensors, there is hardly any collaboration between the spatially distributed sensor devices to boost vessel performance. Up to this day, physical redundancy has been mostly discussed in maritime literature and has also been required by certain ship system design regulations. The use of virtual sensors (software-based) has not been properly investigated yet for maritime applications, despite their successful application in other fields like aircraft control and process control. This paper proposes a novel switching mechanism to alternate between physical and virtual sensors used in the primary propulsion control layer of marine vessels aiming to compensate for the effects of sensor faults. The switching mechanism focuses on ensuring the safe performance of the propulsion grid after the sensor faults occur. The software sensors are constructed using mathematical models describing the nonlinear dynamics of the propulsion system and the input and sensor output data. Simulation results are used to illustrate the switching mechanism’s performance in the case of a hybrid propulsion system, where the different subsystems are controlled in a distributed configuration.

This paper addresses the problem of guaranteeing efficient inland waterway transport in the presence of sequential movable bridges, which must be operated to grant vessel passage. The main contribution is the formulation of the vessel passage scheduling problem as a mixedinteger programming problem. The scheduling algorithm receives vessel widths and voyage plans, and determines feasible vessel passage through bridges that best matches vessel plans. Process optimization is carried out using a rolling horizon implementation to keep the problem computationally tractable in real-time applications. Finally, a realistic case study based on the Rhine-Alpine corridor is used to test the approach and demonstrate its effectiveness.

This paper proposes a virtual sensor scheme designed to compensate for sensor fault effects in marine fuel engines. The proposed scheme design follows a distributed approach, where the marine fuel engine is decomposed in several subsystems. Then, for each subsystem we design a monitoring agent that can actively compensate for the effects of sensor faults occurring in the specific subsystem. This is realized using virtual sensors that can estimate the sensor fault in order to reconstruct the faulty measurements. Due to the Differential-Algebraic mathematical description of marine fuel engine dynamics, we design three types of virtual sensors; using adaptive observers, Set Inversion via Interval Analysis (SIVIA) and static models. Simulation results are used to illustrate the efficiency of the method.

This paper considers the inland waterborne transport (IWT) problem, and presents a scheduling approach for inland vessels and locks to generate optimal vessel and lock timetables. The scheduling strategy is designed in the switching max-plus-linear (SMPL) systems framework, as these are characterized by a number of features that make them well suited to represent the IWT problem. In particular, the resulting model is linear in the max-plus algebra, and SMPL systems can switch between modes, an interesting feature due to the presence of vessel routing and ordering constraints in the model. Moreover, SMPL systems can be transformed into mixed-integer linear programming (MILP) problems, for which efficient solvers are available. Finally, a realistic case study is used to test the approach and assess its effectiveness.

This paper presents a rule-compliant trajectory optimization method for the guidance and control of autonomous surface vessels. The method builds on Model Predictive Contouring Control and incorporates the International Regulations for Preventing Collisions at Sea - known as COLREGs - relevant for motion planning. We use these traffic rules to derive a trajectory optimization algorithm that guarantees safe navigation in mixed-traffic conditions, that is, in traffic environments with human operated vessels. The choice of an optimization-based approach enables the formalization of abstract verbal expressions, such as traffic rules, and their incorporation in the trajectory optimization algorithm along with the dynamics and other constraints that dictate the system's evolution over a sufficiently long receding horizon. The ability to plan considering different types of constraints over a long horizon in a unified manner leads to a proactive motion planner that mimics rule-compliant maneuvering behavior. The efficacy of the derived algorithm is validated in different simulation scenarios.

This paper proposes a novel dynamic coordination control scheme for a physically connected multi-vessel towing system to transport an offshore platform. The transportation process is executed by four tugboats, and each of them has a leading or following role. To render the transportation faster, the roles of the tugboats can be switched in the towing process. The dynamic coordination decision mechanism is designed to allocate in real-time a combination of roles to the tugs by comparing the position and heading of the offshore platform to the next waypoint position. A control allocation strategy is developed to optimally control the position and heading of the tugboats considering multiple constraints. The reference trajectory of the tugboats is dynamically calculated based on the assigned role of each tugboat. A simulation experiment indicates that the proposed control scheme can enhance the maneuver-ability of the physically connected multi-vessel towing system and increase the efficiency of offshore platform transportation.

This paper proposes a multi-objective cooperative control method for a ship-towing system in congested water traffic environments. The control objectives are to coordinate multiple autonomous tugboats for transporting a ship to: (i) follow the waypoints, (ii) adjust the heading, (iii) track the speed profile, and (iv) resolve collisions. The problem is tackled by the design of multiple control agents distributed in two control layers. Based on the strategy of model predictive control (MPC), the supervisory controller in the higher layer calculates the towing angles and forces of the ship, the tug controller in the lower layer computes the tug thruster forces and moment. The consensus between the lower and higher layer control is achieved by using the altering direction method of multipliers (ADMM) that makes the predicted tug position and heading approach to the desired tug trajectory. Simulation experiments indicate that the proposed method coordinates multiple autonomous tugboats to transport a ship smoothly and effectively and succeeds in multiple control objectives, in the meantime, the avoidance operation complies with COLREGS rules.