The challenge of avoiding aliasing in the Doppler spectrum for precipitation is addressed. A novel integrative signal processing approach has been proposed to address the research gaps from various disciplines. The proposed approach consists of several steps. First, an aperiodic way of sampling the echoes (aperiodic sampling refers to aperiodic pulse train in the context of radar echoes in slow time) has been proposed by which the maximum unambiguous Doppler frequency (velocity) is enhanced. Second, the Doppler spectrum moment estimation is performed with the help of a parametric form of its covariance. The performance of the moment estimation is assessed by the bias and the variance in the estimated counterparts. The theoretical variance for the parameter estimation is also derived. An aperiodic pulse train design recommendation has been proposed for adequately and unambiguously estimating the Doppler moments for one extended target (like precipitation). Finally, a spectrum reconstruction technique is implemented after the moment estimation on simulated radar echo samples for a realistic precipitation-like event. The comparison with the other approaches proves its superiority for parameter estimation and Doppler spectrum reconstruction.

In this paper, we address the limitations of traditional constant false alarm rate (CFAR) target detectors in automotive radars, particularly in complex urban environments with multiple objects that appear as extended targets. We propose a data-driven radar target detector exploiting a highly efficient 2D CNN backbone inspired by the computer vision domain. Our approach is distinguished by a unique cross-sensor supervision pipeline, enabling it to learn exclusively from unlabeled synchronized radar and lidar data, thus^eliminating the need for costly manual object annotations. Using a novel large-scale, real-life multi-sensor dataset recorded in various driving scenarios, we demonstrate that the proposed detector generates dense, lidar-like point clouds, achieving a lower Chamfer distance to the reference lidar point clouds than CFAR detectors. Overall, it significantly outperforms CFAR baselines detection accuracy.

In this study, the problem of multipath in radar sensor networks for human activity recognition (HAR) has been examined. Traditionally considered as a source of additional clutter, the multipath is being investigated for its potential to be exploited through the creation of virtual radar nodes. These virtual nodes are conceptualized to observe targets from aspect angles that differ from those of physically existing radars. To realize this idea, an innovative processing pipeline is proposed that extracts information from multipath signals to improve HAR. The pipeline isolates and tracks the line-of-sight (LOS) and multipath components of a moving human target performing continuous sequences of activities observed by a network of three radar sensors. Furthermore, the method has been verified with experimental data consisting of six activities and 14 volunteers by comparing classification metrics with the use of a single radar as well as only the LOS components of the three radars in the network. A 12-layer convolutional neural network (CNN) classifier has been designed to operate on range-Doppler (RD) images derived from the LOS and multipath components, extracted by the proposed method. A substantial performance improvement using the leave-one-person-out (L1Po) test set is demonstrated in the order of +11% by exploiting a multiradar network with its LOS and multipath components.

Automotive radar interference problem between multiple radar sensors is investigated. Phase-coded frequency modulated continuous wave (PC-FMCW) radar structure with low sampling and processing power demands is introduced to blindly mitigate mutual interference. The interference resiliency of the proposed structure is evaluated and compared with the conventional frequency modulated continuous wave (FMCW) automotive radar. It is demonstrated that the proposed approach is more robust to both coherent and non-coherent interference types, allowing resilience to both external interference of radars but also the self-interference in the simultaneous multiple input multiple output (MIMO) transmission.

The problem of aliasing in precipitation Doppler spectrum with uniform pulse repetition time is addressed. This work focuses on de-aliasing such Doppler spectra using non-uniform sampling techniques, namely, Log-periodic and Periodic non-uniform sampling. These techniques reduce the ambiguous main lobes caused by aliasing (by going beyond the observable frequency limit) into ambiguous sidelobes that are distinguishable from the original spectra. The SNR is further enhanced by using an Iterative Adaptive Approach (IAA) algorithm. The performance of Doppler moment estimation is presented after applying the IAA algorithm on simulated precipitation-like radar echoes. However, the ambiguous sidelobe suppression is highly dependent on the spectral width of the Doppler spectra.

Incoherent backscattering of mm-waves from natural rough surfaces is considered. A novel method is proposed to determine the statistical properties of surface scattering from range profile measurements. The method is based on modeling the road surface as a grid of uncorrelated scattering elements, described by normalized scattering matrices. Using this model, expressions are derived to estimate the mean value and covariance matrix of surface scattering from measurement data. This procedure is then applied to measurement data of four road surface types, namely: 1) dry asphalt, 2) wet asphalt, 3) asphalt covered by basalt gravel, and 4) old asphalt. Using the derived statistical normalized radar cross-section models, two novel applications are proposed. First, a procedure for synthesizing/simulating surface clutter is proposed. This procedure is subsequently used to simulate received power from surfaces comprising patches of one or multiple road surface conditions. Excellent agreement between simulation and measurement results is demonstrated. Second, a method for determining the optimal polarization of the electromagnetic sensing waves used in a single-polarized radar system is proposed. This method is based on factorizing the antenna polarization vector into two bounded parameters, allowing for numerical evaluation of the minima and maxima for targets with a specified scattering matrix. This method is further extended to work with statistical descriptions of scattering matrices by means of Monte Carlo simulations.

In this paper, an algorithm to generate a sparse linear antenna array for Direction of Arrival (DoA) estimation that works well in combination with Bayesian Compressive Sensing (BCS) is proposed. The proposed algorithms rely on the provided information inherent to BCS, i.e., the entropy of the recovered estimation vector, to place new sensor antenna elements in an initially empty array, so that the most additional information is gathered about the observed scene. It is shown by means of simulation and radar measurements that BCS methods for DoA estimation using sparse sensor arrays provide promising results in terms of detection probability and estimation accuracy. Furthermore, the proposed algorithms are able to generate sparse sensor arrangements which provide an improved performance when compared against randomly generated sparse arrays.

Additive manufacturing (AM) is increasingly recognized as an enabling technology for novel devices with increased functionality and bandwidth for microwave applications. However, due to the layer-by-layer build approach employed by most AM techniques, internal patterns are introduced to printed materials, which cause an effective anisotropy in their material parameters. An electrostatic model inspired by parallel plate capacitors, describing the dielectric anisotropy of materials manufactured with fused filament fabrication (FFF) AM techniques is proposed in this work. The accuracy of the model's predictions about the permittivity tensor of printed materials is investigated via numerical simulations. Furthermore, permittivity tensor measurements are carried out for samples printed with various materials and print settings. Measurement data is fitted to the model via a least squares approach, and excellent agreement is observed. Novel conclusions about the impact of material and print parameters on the effective permittivity of additively manufactured materials, improving the accuracy in modeling and designing additively manufactured microwave devices are drawn.

Both thermal and electromagnetic performance of substrate-integrated waveguide (SIW) and microstrip line-fed shaped-beam arrays with slot and patch radiating elements are conducted. Three array types operating at 26 GHz band, namely SIW slot array, SIW array with patches, and proximity coupled patch array, are considered. The array performances regarding shaped radiation pattern stability with frequency and maximal temperature at the power amplifier chips are discussed. The study highlights intriguing trade-offs between radiation pattern performance and cooling ability in phased arrays.

A novel ensemble prediction technique is introduced to enhance the accuracy of far-field embedded element pattern (EEP) prediction under mutual coupling (MC) effects, while relaxing the training data size challenge in neural network (NN)-based algorithms. The proposed method integrates a two-stage NN for direct EEP prediction from full-wave simulated pattern data in spherical coordinates with a fully connected NN for the prediction of excitation coefficients of an array of infinitesimal dipoles, approximating the full-wave simulated EEPs via constrained infinitesimal dipole modeling (IDM). Quasi-randomly distributed five-element pin-fed S-band patch antenna arrays are used for demonstration purpose. It is shown that, for a large-sized (3500 topologies) and relatively small-sized (1500 topologies) dataset, incorporating IDM-NN with the benchmarked direct EEP-NN in an ensemble technique increases the pattern prediction accuracy by 11% and 60% on average, respectively.

In this paper, the problem of formulating effective processing pipelines for indoor human tracking is investigated, with the usage of a Multiple Input Multiple Output (MIMO) Frequency Modulated Continuous Wave (FMCW) radar. Specifically, two processing pipelines starting with detections on the Range-Azimuth (RA) maps and the Range-Doppler (RD) maps are formulated and compared, together with subsequent clustering and tracking algorithms and their relevant parameters. Experimental results are presented to validate and assess both pipelines, using a 24 GHz commercial radar platform with 250 MHz bandwidth and 15 virtual channels. Scenarios where 1 and 2 people move in an indoor environment are considered, and the influence of the number of virtual channels and detectors' parameters is discussed. The characteristics and limitations of both pipelines are presented, with the approach based on detections on RA maps showing in general more robust results.