The emergence of new electric vehicle (EV) corner concepts with in-wheel motors offers numerous opportunities to improve handling, comfort, and stability. This study investigates the potential of controlling the vehicle's corner positioning by changing wheel toe and camber angles. A high-fidelity simulation environment was used to evaluate the proposed solution. The effects of the placement of the corresponding actuators and the actuation point on the force required during cornering were investigated. The results demonstrate that the toe angle, compared to the camber angle, offers more effect for improving the vehicle dynamics. The developed direct yaw rate control with four toe actuators improves stability, has a positive effect on comfort, and contributes to the development of new active corner architectures for electric and automated vehicles.

@en

This paper presents a novel approach to automated drifting with a standard passenger vehicle, which involves a Nonlinear Model Predictive Control to stabilise and maintain the vehicle at high sideslip angle conditions. The proposed controller architecture is split into three components. The first part consists of the offline computed equilibrium maps, which provide the equilibrium points for each vehicle state given the desired sideslip angle and radius of the path. The second is the predictive controller minimising the errors between the equilibrium and actual vehicle states. The third is a path-following controller, which reduces the path error, altering the equilibrium curvature path. In a high-fidelity simulation environment, we validate the controller architecture capacity to stabilise the vehicle in automated drifting along a desired path, with a maximal lateral path deviation of 1 m. In the experiments with a standard passenger vehicle, we demonstrate that the proposed approach is capable of bringing and maintaining the vehicle at the desired 30 deg sideslip angle in both high and low friction conditions.

@en

This article introduces a methodology for conducting comparative evaluations of vibration-induced discomfort. The aim is to outline a procedure specifically focused on assessing and comparing the discomfort caused by vibrations. The article emphasizes the metrics that can effectively quantify vibration-induced discomfort and provides insights on utilizing available information to facilitate the assessment of differences observed during the comparisons. The study also addresses the selection of appropriate target scenarios and test environments within the context of the comparative evaluation procedure. A practical case study is presented, highlighting the comparison of wheel corner concepts in the development of new vehicle architectures. Currently, the evaluation criteria and difference thresholds available allow for comparative evaluations within a limited range of vehicle vibration characteristics.

@en

This paper presents an original approach to vehicle obstacle avoidance. It involves the development of a nonlinear Model Predictive Contouring Control, which uses torque vectoring to stabilise and drive the vehicle in evasive manoeuvres at the limit of handling. The proposed algorithm combines motion planning, path tracking and vehicle stability objectives, prioritising collision avoidance in emergencies. The controller's prediction model is a nonlinear double-track vehicle model based on an extended Fiala tyre to capture the nonlinear coupled longitudinal and lateral dynamics. The controller computes the optimal steering angle and the longitudinal forces per each of the four wheels to minimise tracking error in safe situations and maximise the vehicle-to-obstacle distance in emergencies. Thanks to the optimisation of the longitudinal tyre forces, the proposed controller can produce an extra yaw moment, increasing the vehicle's lateral agility to avoid obstacles while keeping the vehicle stable. The optimal forces are constrained in the tyre friction circle not to exceed the tyres and vehicle capabilities. In a high-fidelity simulation environment, we demonstrate the benefits of torque vectoring, showing that our proposed approach is capable of successfully avoiding obstacles and keeping the vehicle stable while driving a double-lane change manoeuvre, in comparison to baselines lacking torque vectoring or collision avoidance prioritisation.

@en

This paper proposes a novel vehicle sideslip angle estimator, which uses the physical knowledge from an Unscented Kalman Filter (UKF) based on a non-linear single-track vehicle model to enhance the estimation accuracy of a Convolutional Neural Network (CNN). The model-based and data-driven approaches interact mutually, and both use the standard inertial measurement unit and the tyre forces measured by load sensing technology. CNN benefits from the UKF the capacity to leverage the laws of physics. Concurrently, the UKF uses the CNN outputs as sideslip angle pseudo-measurement and adaptive process noise parameters. The back-propagation through time algorithm is applied end-to-end to the CNN and the UKF to employ the mutualistic property. Using a large-scale experimental dataset of 216 manoeuvres containing a great diversity of vehicle behaviours, we demonstrate a significant improvement in the accuracy of the proposed architecture over the current state-of-art hybrid approach combined with model-based and data-driven techniques. In the case that a limited dataset is provided for the training phase, the proposed hybrid approach still guarantees estimation robustness.

@en

Integrated chassis control systems represent a significant advancement in the dynamics of ground vehicles, aimed at enhancing overall performance, comfort, handling, and stability. As vehicles transition from internal combustion to electric platforms, integrated chassis control systems have evolved to meet the demands of electrification and automation. This paper analyses the overall control structure of automated vehicles with integrated chassis control systems. Integration of longitudinal, lateral, and vertical systems presents complexities due to the overlapping control regions of various subsystems. The presented methodology includes a comprehensive examination of state-of-the-art technologies, focusing on algorithms to manage control actions and prevent interference between subsystems. The results underscore the importance of control allocation to exploit the additional degrees of freedom offered by over-actuated systems. This paper systematically overviews the various control methods applied in integrated chassis control and path tracking. This includes a detailed examination of perception and decision-making, parameter estimation techniques, reference generation strategies, and the hierarchy of controllers, encompassing high-level, middle-level, and low-level control components. By offering this systematic overview, this paper aims to facilitate a deeper understanding of the diverse control methods employed in automated driving with integrated chassis control, providing insights into their applications, strengths, and limitations. @en

The acceptance of automated driving is under the potential threat of motion sickness. It hinders the passengers' willingness to perform secondary activities. In order to mitigate motion sickness in automated vehicles, we propose an optimization-based motion planning algorithm that minimizes the distribution of acceleration energy within the frequency range that is found to be the most nauseogenic. The algorithm is formulated into integral and receding-horizon variants and compared with a commonly used alternative approach aiming to minimize accelerations in general. The proposed approach can reduce frequency-weighted acceleration by up to 11.3% compared with not considering the frequency sensitivity for the price of reduced overall acceleration comfort. Our simulation studies also reveal a loss of performance by the receding-horizon approach over the integral approach when varying the preview time and nominal sampling time. The computation time of the receding-horizon planner is around or below the real-time threshold when using a longer sampling time but without causing significant performance loss. We also present the results of experiments conducted to measure the performance of human drivers on a public road section that the simulated scenario is actually based on. The proposed method can achieve a 19% improvement in general acceleration comfort or a 32% reduction in squared motion sickness dose value over the best-performing participant. The results demonstrate considerable potential for improving motion comfort and mitigating motion sickness using our approach in automated vehicles.

@en

A prime concern for automated vehicles is motion comfort, as an uncomfortable ride may reduce acceptance of the technology amongst the general population. However, it is not clear how transient motions typical for travelling by car affect the experience of comfort. Here, we determine the relation between properties of vehicle motions (i.e., acceleration and jerk) and discomfort empirically, and we evaluate the ability of normative models to account for the data. 23 participants were placed in a moving-base driving simulator and presented sinusoidial and triangular motion pulses with various peak accelerations (A_max0.4 − 2 ms⁻²) and jerks (J_max0.5 − 15 ms⁻³), designed to recreate typical vehicle accelerations. Participants provided discomfort judgments on absolute ‘Verbal Qualifiers’ and relative ‘Magnitude Estimates’ associated with these motions. The data show that discomfort increases with acceleration amplitude, and that the strength of this effect depends on the direction of motion. We furthermore find that higher jerks (shorter duration pulses) are considered more comfortable, and that triangular pulses are more comfortable than sinusoidal pulses. ME responses decrease (i.e., reduced discomfort) with increasing pulse duration. Evaluations of normative models of vibration and shock (ISO 2631), and perceived motion intensity provide mixed results. The vibration model could not account for the data well. Reasonable agreement between predictions and observations were found for the shock model and perceived intensity model, which emphasize the role of acceleration. We present novel statistical models that describe motion comfort as a function of acceleration, jerk, and direction. The present findings are essential to develop motion planning algorithms aimed at maximizing comfort.

@en

Driving simulators have been used in the automotive industry for many years because of their ability to perform tests in a safe, reproducible and controlled immersive virtual environment. The improved performance of the simulator and its ability to recreate in-vehicle experience for the user is established through motion cueing algorithms (MCA). Such algorithms have constantly been developed with model predictive control (MPC) acting as the main control technique. Currently, available MPC-based methods either compute the optimal controller online or derive an explicit control law offline. These approaches limit the applicability of the MCA for real-time applications due to online computational costs and/or offline memory storage issues. This research presents a solution to deal with issues of offline and online solving through a hybrid approach. For this, an explicit MPC is used to generate a look-up table to provide an initial guess as a warm-start for the implicit MPC-based MCA. From the simulations, it is observed that the presented hybrid approach is able to reduce online computation load by shifting it offline using the explicit controller. Further, the algorithm demonstrates a good tracking performance with a significant reduction of computation time in a complex driving scenario using an emulator environment of a driving simulator.

@en

To achieve optimal robot behavior in dynamic scenarios we need to consider complex dynamics in a predictive manner. In the vehicle dynamics community, it is well know that to achieve time-optimal driving on low friction surface, the vehicle should utilize drifting. Hence, many authors have devised rules to split circuits and employ drifting on some segments. These rules are suboptimal and do not generalize to arbitrary circuit shapes (e.g., S-like curves). So, the question “When to go into which mode and how to drive in it?” remains unanswered. To choose the suitable mode (discrete decision), the algorithm needs information about the feasibility of different modes (continuous motion). This makes it a class of Task and Motion Planning (TAMP) problems, which are known to be hard to solve optimally in real-time. In the AI planning community, search methods are commonly used. However, they cannot be directly applied to TAMP problems due to the continuous component. Here, we present a search-based method that effectively solves this problem and efficiently searches in a highly dimensional state space with nonlinear and unstable dynamics. The space of the possible trajectories is explored by sampling different combinations of motion primitives guided by the search. Our approach allows to use multiple locally approximated models to generate motion primitives (e.g., learned models of drifting) and effectively simplify the problem without losing accuracy. The algorithm performance is evaluated in simulated driving on a mixed-track with segments of different curvatures (right and left). Our code is available at https://git.io/JenvB.

@en

In the transition from partial to high automation, occupants will no longer be actively involved in driving. This will allow the use of travel time for work or leisure, where high comfort levels preventing motion sickness are required. In this paper, an optimal trajectory planning algorithm is presented in order to minimise motion sickness in automated vehicles. A predefined path is provided as an input to the algorithm, to generate an optimal path with limited lateral deviation and the corresponding optimal velocity profile, for the minimisation of motion sickness. An optimal control problem is formulated with a cost function combining both motion sickness and travel time. For a sickening curvy road, the algorithm reduced the motion sickness dose value (MSDV) up to 52% depending on the allowed lateral deviation and the weighting on travel time. The efficacy of the proposed algorithm has been evaluated via human-in-the-loop experiments using a moving-base driving simulator. Motion cueing parameters were selected to optimally transmit the sickening stimuli resulting in close to full vibration transmission above 0.2 Hz. During the experiment, the participants were asked to rate their experience based on the standard MIsery SCore ratings. According to these, sickness levels were reduced on average by 65% with reduced motion sickness in all 16 participants.

@en

This paper presents an innovative combined control using Model Predictive Control (MPC) to enhance the stability of automated vehicles. It integrates path tracking and vehicle stability control into a single controller to satisfy both objectives. The stability enhancement is achieved by computing two expected yaw rates based on the steering wheel angle and on lateral acceleration into the MPC model. The vehicle's stability is determined by comparing the two reference yaw rates to the actual one. Thus, the MPC controller prioritises path tracking or vehicle stability by actively varying the cost function weights depending on the vehicle states. Using two industrial standard manoeuvres, i.e. moose test and double lane change, we demonstrate a significant improvement in path tracking and vehicle stability of the proposed MPC over eight benchmark controllers in the high-fidelity simulation environment. The numerous benchmark controllers use different path tracking and stability control methods to assess each performance benefit. They are split into two groups: the first one uses differential braking in the control output, while the second group can only provide an equal brake torque for the wheels in the same axle. Furthermore, the controller's robustness is evaluated by changing various parameters, e.g. initial vehicle speed, mass and road friction coefficient. The proposed controller keeps the vehicle stable at higher speeds even with varying conditions.

@en

Automated vehicles promise numerous advantages to their users. The proposed benefits could however be overshadowed by a rise in the susceptibility of passengers to motion sickness due to their engagement in non-driving tasks. Increasing attention is paid to designing vehicle motion to mitigate motion sickness. In this work, the deep reinforcement learning (DRL) method is used to plan vehicle trajectories, with a focus on minimizing low-frequency accelerations. These are known to be the primary cause of motion sickness. The goal is achieved by incorporating a frequency-weighted discomfort term into the reward function during training. The ability of the trained agent to target undesirable frequencies in accelerations is verified by comparing it with another agent trained for improving overall acceleration comfort. A reduction of 9.6% in frequency-weighted discomfort is achieved. The motion plan from the DRL agent is further compared with trajectories generated by human drivers in real-world scenarios. The results demonstrate comparable performance between the DRL agent and human drivers. Meanwhile, a significant reduction in online computation time has been observed when compared to a motion planner based on numerical optimization.

@en

The benefits of automated driving can only be fully realized if the occupants are protected from motion sickness. Active suspensions hold the potential to raise the comfort level in automated passenger vehicles by enabling new functionalities in chassis control. One example is to actively lean the vehicle body toward the center of the corner to counteract the inertial lateral acceleration. Commonly known as curve tilting, the concept is deemed effective in reducing postural disturbance on the occupants and the visual-vestibular conflict when the occupants do not have an external view. We present in this article a nonlinear model predictive control (NMPC) method for the curve tilting functionality. The controller incorporates the nonlinear suspension forces in the prediction model to help achieve high tracking accuracy near the physical limit of the suspension system. The optimization process is accelerated with an explicit initialization method that is based on piecewise-affine (PWA) modeling and offline solution to an alternative optimal control problem (OCP). The controller is able to operate at 20 Hz in a hardware-in-the-loop (HIL) setup. Given sufficient computational resources, we observe a significant reduction in the lateral acceleration sensed by the passenger over a vehicle with passive suspensions, namely, by 46.5%, 25.4%, and 25.4% in the highway, rural, and urban driving scenarios, respectively. The NMPC also outperforms the baseline proportional-integral-derivative (PID) controller by achieving lower tracking error, namely, by 12.9%, 16.4%, and 38.0% in the aforementioned scenarios.

@en

This paper presents the validation of an integrated chassis controller that unites three groups of actuators for the electric vehicle (EV) with independent in-wheel electric motors (IWMs) for each wheel. Controlled actuators are the IWMs, the active suspension, and the braking system. The models of test benches and the designed architecture of the X-in-the-loop network are presented. The proposed design approach allows testing the developed controller on a vehicle model in real-time and on hardware components.@en

This paper presents a novel methodology to auto-tune an Unscented Kalman Filter (UKF). It involves using a Two-Stage Bayesian Optimisation (TSBO), based on a t-Student Process to optimise the process noise parameters of a UKF for vehicle sideslip angle estimation. Our method minimises performance metrics, given by the average sum of the states’ and measurement’ estimation error for various vehicle manoeuvres covering a wide range of vehicle behaviour. The predefined cost function is minimised through a TSBO which aims to find a location in the feasible region that maximises the probability of improving the current best solution. Results on an experimental dataset show the capability to tune the UKF in 79.9% less time than using a genetic algorithm (GA) and the overall capacity to improve the estimation performance in an experimental test dataset of 9.9% to the current state-of-the-art GA.@en

In future automated vehicles we will often engage in non-driving tasks and will not watch the road. This will affect postural stabilization and may elicit discomfort or even motion sickness in dynamic driving. Future vehicles will accommodate this with properly designed seats and interiors, whereas comfortable vehicle motion will be achieved with smooth driving styles and well-designed (active) suspensions. To support research and development in dynamic comfort, this paper presents the validation of a multi-segment full-body human model, including visuo-vestibular and muscle spindle feedback, for postural stabilization. Dynamic driving is evaluated using a “sickening drive”, including a 0.2 Hz 4 m/s² slalom. Vibration transmission is evaluated with compliant automotive seats, applying 3D platform motion and evaluating 3D translation and rotation of pelvis, trunk and head. The model matches human motion in dynamic driving and reproduces fore–aft, lateral and vertical oscillations. Visuo-vestibular and muscle spindle feedback are shown to be essential, in particular, for head–neck stabilization. Active leg muscle control at the hips and knees is shown to be essential to stabilize the trunk in the high-amplitude slalom condition but not with low-amplitude horizontal vibrations. However, active leg muscle control can strongly affect 4–6 Hz vertical vibration transmission. Compared to the vibration tests, the dynamic driving tests show enlarged postural control gains to minimize trunk and head roll and pitch and to align head yaw with driving direction. Human modelling can enable the insights required to achieve breakthrough comfort enhancements, while enabling efficient developments for a wide range of driving conditions, body sizes and other factors. Hence, modelling human postural control can accelerate the innovation of seats and vehicle motion-control strategies for (automated) vehicles.

@en

A realistic steering feel is one of the key elements to guarantee fidelity on a driving simulator in general, and in particular to replicate on-centre vehicle handling. This requires precise modelling of the steering dynamics, a high bandwidth control loading system, and coupling of virtual and physical components in agreement with computational requirements and hardware limitations. For such a coupling, the common approach position-based control uses the measured signals of steering wheel angle and steering rate as inputs to the steering system model. This paper proposes an alternative torque-based control scheme using steering torque as an input to the steering system with additional compensation. Torque-based control was designed and evaluated in conjunction with detailed electric power steering models including state-of-the-art friction models, a neuromuscular driver model, and two driver-in-the-loop experiments in a high-end driving simulator. The objective analysis performed by means of the neuromuscular driver model reveals that the driver applies less impedance i.e. the driver is less stiff on a driving simulator when steering feedback is provided with the torque-based control compared to the position-based control. The investigations demonstrate that torque-based control reduces haptic response delay and vibrations caused by friction modelling compared to position-based control. The driver-in-the-loop experiments show significant objective effects on steering performance and subjective evaluation of fidelity and effort. We conclude that the proposed approach closes the vehicle-driver loop with more realism in a driving simulator.

@en