Augmented reality (AR) has shown potential in computer-aided surgery. It allows for the visualization of hidden anatomical structures as well as assists in navigating and locating surgical instruments at the surgical site. Various modalities (devices and/or visualizations) have been used in the literature, but few studies investigated the adequacy/superiority of one modality over the other. For instance, the use of optical see-through (OST) HMDs has not always been scientifically justified. Our goal is to compare various visualization modalities for catheter insertion in external ventricular drain and ventricular shunt procedures. We investigate two AR approaches: (1) 2D approaches consisting of a smartphone and a 2D window visualized through an OST (Microsoft HoloLens 2), and (2) 3D approaches consisting of a fully aligned patient model and a model that is adjacent to the patient and is rotationally aligned using an OST. 32 participants joined this study. For each visualization approach, participants were asked to perform five insertions after which they filled NASA-TLX and SUS forms. Moreover, the position and orientation of the needle with respect to the planning during the insertion task were collected. The results show that participants achieved a better insertion performance significantly under 3D visualizations, and the NASA-TLX and SUS forms reflected the preference of participants for these approaches compared to 2D approaches.

Background: The aim of this study was to compare three surgical interventions for correction of sagittal synostosis-frontobiparietal remodeling (FBR), extended strip craniotomy (ESC), and spring-Assisted correction (SAC)-based on three-dimensional (3D) photogrammetry and operation characteristics. Methods: Patients who were born between 1991 and 2019 and diagnosed with nonsyndromic sagittal synostosis who underwent FBR, ESC, or SAC and had at least one postoperative 3D photogrammetry image taken during one of six follow-up appointments until age 6 were considered for this study. Operative characteristics, postoperative complications, reinterventions, and presence of intracranial hypertension were collected. To assess cranial growth, orthogonal cranial slices and 3D photocephalometric measurements were extracted automatically and evaluated from 3D photogrammetry images. Results: A total of 322 postoperative 3D images from 218 patients were included. After correcting for age and sex, no significant differences were observed in 3D photocephalometric measurements. Mean cranial shapes suggested that postoperative growth and shape gradually normalized with higher occipitofrontal head circumference and intracranial volume values compared with normal values, regardless of type of surgery. Flattening of the vertex seems to persist after surgical correction. The authors' cranial 3D mesh processing tool has been made publicly available as a part of this study. Conclusions: The findings suggest that until age 6, there are no significant differences among the FBR, ESC, and SAC in their ability to correct sagittal synostosis with regard to 3D photocephalometric measurements. Therefore, efforts should be made to ensure early diagnosis so that minimally invasive surgery is a viable treatment option. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Purpose: In minimally invasive spring-assisted craniectomy, surgeons plan the surgery by manually locating the cranial sutures. However, this approach is prone to error. Augmented reality (AR) could be used to visualize the cranial sutures and assist in the surgery planning. The purpose of our work is to develop an AR-based system to visualize cranial sutures, and to assess the accuracy and usability of using AR-based navigation for surgical guidance in minimally invasive spring-assisted craniectomy. Methods: An AR system was developed that consists of an electromagnetic tracking system linked with a Microsoft HoloLens. The system was used to conduct a study with two skull phantoms. For each phantom, five sutures were annotated and visualized on the skull surface. Twelve participants assessed the system. For each participant, model alignment using six anatomical landmarks was performed, followed by the participant delineation of the visualized sutures. At the end, the participants filled a system usability scale (SUS) questionnaire. For evaluation, an independent optical tracking system was used and the delineated sutures were digitized and compared to the CT-annotated sutures. Results: For a total of 120 delineated sutures, the distance of the annotated sutures to the planning reference was 2.4 ± 1.2 mm. The average delineation time per suture was 13 ± 5 s. For the system usability questionnaire, an average SUS score of 73 was obtained. Conclusion: The developed AR-system has good accuracy (average 2.4 mm distance) and could be used in the OR. The system can assist in the pre-planning of minimally invasive craniosynostosis surgeries to locate cranial sutures accurately instead of the traditional approach of manual palpation. Although the conducted phantom study was designed to closely reflect the clinical setup in the OR, further clinical validation of the developed system is needed and will be addressed in a future work.

Three-dimensional (3D) stereophotogrammetry is a novel imaging technique that has gained popularity in the medical field as a reliable, non-invasive, and radiation-free imaging modality. It uses optical sensors to acquire multiple 2D images from different angles which are reconstructed into a 3D digital model of the subject's surface. The technique proved to be especially useful in craniofacial applications, where it serves as a tool to overcome the limitations imposed by conventional imaging modalities and subjective evaluation methods. The capability to acquire high-dimensional data in a quick and safe manner and archive them for retrospective longitudinal analyses, provides the field with a methodology to increase the understanding of the morphological development of the cranium, its growth patterns and the effect of different treatments over time.This review describes the role of 3D stereophotogrammetry in the evaluation of craniosynostosis, including reliability studies, current and potential clinical use cases, and practical challenges. Finally, developments within the research field are analyzed by means of bibliometric networks, depicting prominent research topics, authors, and institutions, to stimulate new ideas and collaborations in the field of craniofacial 3D stereophotogrammetry.We anticipate that utilization of this modality's full potential requires a global effort in terms of collaborations, data sharing, standardization, and harmonization. Such developments can facilitate larger studies and novel deep learning methods that can aid in reaching an objective consensus regarding the most effective treatments for patients with craniosynostosis and other craniofacial anomalies, and to increase our understanding of these complex dysmorphologies and associated phenotypes.