This thesis presents a 48V-to-1V 10-level dual inductor hybrid converter (DIHC) containing 11 on-chip switches and an off-chip Gallium Nitride (GaN) switch. Thanks to the 10-level Dickson switched-capacitor (SC) circuit, most of the voltage stress will be taken over by off-chip capacitors, which reduces the voltage stress of each switch to 4.8 V and takes full advantage of the voltage pressure on the 5-V on-chip transistors. This proposed structure is implemented in a 0.18-μm BCD process to convert 48-V input to 1-V output with up to 18-A current load. The post-layout simulations show that a peak power efficiency of 90.6% can be achieved at 5.2-A loading and the power density is about 2093 W/in3 considering the power stage volume.
This thesis also proposes a 48V/3V multi-resonant DC-DC converter for data center applications, consisting of a 3Φ-SC stage and a 4-to-1 series-parallel stage. Thanks to the multi-phase resonant operation mode, the converter uses fewer components to achieve the same voltage conversion ratio as the conventional two-phase SC converters, and can further improve the efficiency by realising soft-charging. This topology is simulated in cadence spectre, and achieves a peak efficiency of 96.94%, and 95.0% full load efficiency at 30-A load.