Development and assessment of a nonlinear elasto–viscoelastic–viscoplastic model for cyclic and sustained loading with subsequent recovery in wood under compression
Changxi Yang (Technische Universität München)
Mostafa Abdelrahman (Suez Canal University, Technische Universität München)
Ani Khaloian-Sarnaghi (Graz University of Technology)
Yaman Dalal (Technische Universität München)
Jan Willem van de Kuilen (Technische Universität München, TU Delft - Civil Engineering & Geosciences)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Timber structures are evolving rapidly, featuring increasing spans, greater heights, longer service lives, and a broader range of applications. Some of these applications require a comprehensive understanding of wood’s mechanical behavior, including both creep and fatigue. While wood is known to exhibit nonlinear time-dependent mechanical behavior, existing studies are largely limited to single or static loads, whereas complex load cases, such as varying stress levels or a mixture of fatigue and rheological effects, are underinvestigated. To address this, this study presents an integrated experimental and modeling framework on European ash loaded in longitudinal compression under controlled constant climate conditions. The proposed program employed repeated load–recovery sequences on the same specimen, enabling comparison across multiple stress levels. Three types of loading were studied and compared—ramp, creep, and fatigue at two frequencies (0.1 Hz and 1 Hz). The results revealed elastic, viscoelastic, and viscoplastic strain components across all three loading types. Notably, the irrecoverable strain resulted from both the applied stress level and the duration of the load. Following these observations, a numerical model with a rate-dependent viscoelastic–viscoplastic framework was proposed and calibrated using multi-specimen creep data via a microstructure-based parameter-scaling approach. The calibrated model was used to predict fatigue test results at different frequencies and stress levels. While it captured the time-dependent strain response under sustained loading reasonably well, discrepancies of varying magnitudes were observed relative to the fatigue tests, indicating limitations of the current viscoplastic formulation in describing cyclic strain response. These findings offer new insights about the nonlinear creep and fatigue behavior of complex biomaterials such as wood, and provide opportunities to incorporate additional frequency-dependent mechanisms in advanced applications.