Connection of timber foundation piles to concrete extension piles

Conference paper (2021)

Authors

G.J.P. Ravenshorst Bio-based Structures & Materials - CEG
M. Mirra Bio-based Structures & Materials - CEG
René Steiger Swiss Federal Laboratories for Materials Science and Technology (Empa)
J.W.G. van de Kuilen Technische Universität München, Bio-based Structures & Materials - CEG
Research Group
Bio-based Structures & Materials (CEG) (TU Delft)
Copyright: © 2021 G.J.P. Ravenshorst, J.H. van Dalen, M. Mirra, René Steiger, J.W.G. van de Kuilen
More Info
expand_more

Published Date

2021

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Civil Engineering & Geosciences

Department

Engineering Structures

Research Group

Bio-based Structures & Materials

Abstract

In this work, the relationship for a socket-type connection in wooden foundation piles is investigated, and a trilinear moment-rotation diagram was determined by means of experiment.
Numerical and analytical models confirmed that the material properties for compression perpendicular to the grain are governing for the connections’ strength and stiffness properties. This was similar to the response found in the experiment, where ductile behaviour was observed, which can be explained from the plasticization after the compression strength perpendicular was reached. Although because of the specific configuration (confined in a circular tube) the found strength perpendicular to the grain cannot be assigned to other configurations, a good estimation of the stiffness of the connection can be made with FEM models, assuming an MOE90 of 70 N/mm2 for a fully saturated pile. With a conservative assumption for the strength perpendicular to the grain the influence of the connection in a pile-soil model can be investigated also for other configurations than the tested one.
A procedure to study the influence of tangential (usually horizontal) soil displacements on timber piles with concrete extensions piles on top is proposed.
The outcome of a specific situation from practice with high horizontal loads showed that the bending capacity of the timber pile will in most cases be governing and not the investigated socket connection.

Files

54_07_11_Connection_of_timber_... (pdf)
(pdf | 1.57 Mb)
Unknown license