Satellite observations are critical for air quality and climate monitoring, and for developing the process understanding needed for reliable planning and predictions. Our current space-based observing system stands at a crossroads with the early missions approaching their end-of-life. We articulate the challenges and needs to sustain and develop these environmental records into the future, focusing specifically on observations of gas-phase atmospheric composition.@en

We have analyzed Sentinel-5 Precursor TROPOspheric Monitoring Instrument (TROPOMI) data over the Copperbelt mining region (Democratic Republic of Congo and Zambia). Despite high background values, annual 2019–2022 means of TROPOMI NO₂ (nitrogen dioxide) show local enhancements consistent with six point sources (four copper/cobalt mines, two cities) where high-emission industrial activities take place. We have quantified annual NO_x (nitrogen oxides) emissions from these point sources, identified temporal trends in emissions, and found strong correlations with production data from colocated mines and one oil refinery. The Copernicus Atmosphere Monitoring Service Global Anthropogenic (CAMS-GLOB-ANT) version 5 inventory underpredicts TROPOMI-derived emissions and lacks the temporal trends observed in TROPOMI and mine/refinery production. These results demonstrate the potential for satellite monitoring of mining and other industrial activities, often unreported or underestimated, which impact the air quality of local communities. This is particularly important for Africa, where mining is increasing aggressively.

@en

The Multi-Scale Infrastructure for Chemistry and Aerosols Version 0 (MUSICAv0) is a new community modeling infrastructure that enables the study of atmospheric composition and chemistry across all relevant scales. We develop a MUSICAv0 grid with Africa refinement (∼ 28 km × 28 km over Africa). We evaluate the MUSICAv0 simulation for 2017 with in situ observations and compare the model results to satellite products over Africa. A simulation from the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), a regional model that is widely used in Africa studies, is also included in the analyses as a reference. Overall, the performance of MUSICAv0 is comparable to WRF-Chem. Both models underestimate carbon monoxide (CO) compared to in situ observations and satellite CO column retrievals from the Measurements of Pollution in the Troposphere (MOPITT) satellite instrument. MUSICAv0 tends to overestimate ozone (O3), likely due to overestimated stratosphere-to-troposphere flux of ozone. Both models significantly underestimate fine particulate matter (PM2.5) at two surface sites in East Africa. The MUSICAv0 simulation agrees better with aerosol optical depth (AOD) retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS) and tropospheric nitrogen dioxide (NO2) column retrievals from the Ozone Monitoring Instrument (OMI) than WRF-Chem. MUSICAv0 has a consistently lower tropospheric formaldehyde (HCHO) column than OMI retrievals. Based on model–satellite discrepancies between MUSICAv0 and WRF-Chem and MOPITT CO, MODIS AOD, and OMI tropospheric NO2, we find that future field campaign(s) and more in situ observations in the East African region (5∘ S–5∘ N, 30–45∘ E) could substantially improve the predictive skill of atmospheric chemistry model(s). This suggested focus region exhibits the largest model–in situ observation discrepancies, as well as targets for high population density, land cover variability, and anthropogenic pollution sources.@en

COVID-19 caused a historic collapse in fossil fuel demand, a general decline in economic activity, and hydrocarbon price volatility. This resulted in an unprecedented scenario to evaluate the contribution of the O&G (Oil and Gas) industry NO₂ (nitrogen dioxide) emissions in the Permian basin (United States), currently the second largest hydrocarbon-bearing area on Earth. TROPOMI (Tropospheric Monitoring Instrument), on board the Sentinel-5P satellite, has captured the impact of the oil and gas industry emissions during the COVID-19 lockdown. A generalized drop (∼30%) of NO₂ emissions derived using the divergence method in comparison with 2019 was observed following the decline in production and drilling (13% and 68% respectively) during the lockdown. NO₂ tropospheric columns were less impacted with a smaller decrease (∼4%) across the basins. This study demonstrates that the impact of the COVID-19 lockdown on NO₂ emissions was not only present in urban areas but also in vast O&G production regions, which shows the potential of TROPOMI to assess future pollution mitigation strategies for this industry.

@en

Emissions of methane (CH₄) in the Permian basin (USA) have been derived for 2019 and 2020 from satellite observations of the Tropospheric Monitoring Instrument (TROPOMI) using the divergence method, in combination with a data driven method to estimate the background column densities. The resulting CH₄ emission data, which have been verified using model data with known emissions, have a spatial resolution of approximately 10 km. The CH₄ emissions show moderate spatial correlation with the locations of oil and gas production and drilling activities in the Permian basin, as well as with emissions of nitrogen oxides (NO_x). Analysis of the emission maps and time series indicates that a significant fraction of methane emissions in the Permian basin is from frequent widespread emissions sources, rather than from a few infrequent very large unplanned releases, which is important considering possible CH₄ emission mitigation strategies. In addition to providing spatially resolved emissions, the divergence method also provides the total emissions of the Permian basin and its main sub-basins. The total CH₄ emission of the Permian is estimated as 3.0 ± 0.7 Tg yr⁻¹ for 2019, which agrees with other independent estimates based on TROPOMI data. For the Delaware sub-basin, it is estimated as 1.4 ± 0.3 Tg yr⁻¹ for 2019, and for the Midland sub-basin 1.2 ± 0.3 Tg yr⁻¹. In 2020 the emissions are 9% lower compared to 2019 in the entire Permian basin, and respectively 19% and 27% for the Delaware and Midland sub-basins.

@en

We analyzed observational and model data to study the sources of formaldehyde over oil and gas production regions and to investigate how these observations may be used to constrain oil and gas volatile organic compound (VOC) emissions. The analysis of aircraft and satellite data consistently found that formaldehyde over oil and gas production regions during spring and summer is mostly formed by the photooxidation of precursor VOCs. Formaldehyde columns over the Permian Basin, one of the largest oil- and gas-producing regions in the United States, are correlated with the production locations. Formaldehyde simulations by the atmospheric chemistry and transport model WRF-Chem, which included oil and gas NO_x and VOC emissions from the fuel-based oil and gas inventory, were in very good agreement with TROPOMI satellite measurements. Sensitivity studies illustrated that VOCs released from oil and gas activities are important precursors to formaldehyde, but other sources of VOCs contribute as well and that the formation of secondary formaldehyde is highly sensitive to NO_x. We also investigated the ability of the chemical mechanism used in WRF-Chem to represent formaldehyde formation from oil and gas hydrocarbons by comparing against the Master Chemical Mechanism. Further, our work provides estimates of primary formaldehyde emissions from oil and gas production activities, with per basin averages ranging from 0.07 to 2.2 kg h^-1 in 2018. A separate estimate for natural gas flaring found that flaring emissions could contribute 5 to 12% to the total primary formaldehyde emissions for the Permian Basin in 2018.

@en

The aim of this paper is to highlight how TROPOspheric Monitoring Instrument (TROPOMI) trace gas data can best be used and interpreted to understand event-based impacts on air quality from regional to city scales around the globe. For this study, we present the observed changes in the atmospheric column amounts of five trace gases (NO2, SO2, CO, HCHO, and CHOCHO) detected by the Sentinel-5P TROPOMI instrument and driven by reductions in anthropogenic emissions due to COVID-19 lockdown measures in 2020. We report clear COVID-19-related decreases in TROPOMI NO2 column amounts on all continents. For megacities, reductions in column amounts of tropospheric NO2 range between 14g % and 63g %. For China and India, supported by NO2 observations, where the primary source of anthropogenic SO2 is coal-fired power generation, we were able to detect sector-specific emission changes using the SO2 data. For HCHO and CHOCHO, we consistently observe anthropogenic changes in 2-week-Averaged column amounts over China and India during the early phases of the lockdown periods. That these variations over such a short timescale are detectable from space is due to the high resolution and improved sensitivity of the TROPOMI instrument. For CO, we observe a small reduction over China, which is in concert with the other trace gas reductions observed during lockdown; however, large interannual differences prevent firm conclusions from being drawn. The joint analysis of COVID-19-lockdown-driven reductions in satellite-observed trace gas column amounts using the latest operational and scientific retrieval techniques for five species concomitantly is unprecedented. However, the meteorologically and seasonally driven variability of the five trace gases does not allow for drawing fully quantitative conclusions on the reduction in anthropogenic emissions based on TROPOMI observations alone. We anticipate that in future the combined use of inverse modeling techniques with the high spatial resolution data from S5P/TROPOMI for all observed trace gases presented here will yield a significantly improved sector-specific, space-based analysis of the impact of COVID-19 lockdown measures as compared to other existing satellite observations. Such analyses will further enhance the scientific impact and societal relevance of the TROPOMI mission.

@en

The Ozone Monitoring Instrument (OMI) was launched on 15 July 2004, with an expected mission lifetime of 5 years. After more than 17 years in orbit the instrument is still functioning satisfactorily and in principle can continue doing so until the expected decommissioning of its platform Aura in 2025. In order to continue the datasets acquired by OMI and the Microwave Limb Sounder, the mission was extended up to at least 2023. Actions have been taken to ensure the proper functioning of the OMI operations, the data processing, and the calibration monitoring system until the eventual end of the mission. For the data processing a new level-0 (L0) to level-1b (L1b) data processor was built based on the recent developments for the TROPOspheric Monitoring Instrument (TROPOMI). With corrections for the degradation of the instrument now included, it is feasible to generate a new data collection to supersede the current collection-3 data products and reprocess the data of the entire mission up to now. This paper describes the differences between the collection-3 and collection-4 data. It will be shown that the collection-4 L1b data comprise a clear improvement with respect to the previous collections. By correcting for the gentle optical and electronic aging that has occurred over the past 17 years, OMI's ability to make trend-quality ozone measurements has further improved.

@en

Nitrogen dioxide (NO₂) is an important contributor to air pollution and can adversely affect human health^1–9. A decrease in NO₂ concentrations has been reported as a result of lockdown measures to reduce the spread of COVID-19^10–20. Questions remain, however, regarding the relationship of satellite-derived atmospheric column NO₂ data with health-relevant ambient ground-level concentrations, and the representativeness of limited ground-based monitoring data for global assessment. Here we derive spatially resolved, global ground-level NO₂ concentrations from NO₂ column densities observed by the TROPOMI satellite instrument at sufficiently fine resolution (approximately one kilometre) to allow assessment of individual cities during COVID-19 lockdowns in 2020 compared to 2019. We apply these estimates to quantify NO₂ changes in more than 200 cities, including 65 cities without available ground monitoring, largely in lower-income regions. Mean country-level population-weighted NO₂ concentrations are 29% ± 3% lower in countries with strict lockdown conditions than in those without. Relative to long-term trends, NO₂ decreases during COVID-19 lockdowns exceed recent Ozone Monitoring Instrument (OMI)-derived year-to-year decreases from emission controls, comparable to 15 ± 4 years of reductions globally. Our case studies indicate that the sensitivity of NO₂ to lockdowns varies by country and emissions sector, demonstrating the critical need for spatially resolved observational information provided by these satellite-derived surface concentration estimates.

@en

The production of crude oil and natural gas is associated with emissions of air pollutants, such as nitrogen oxides (NOx = NO + NO2) and volatile organic compounds, which are precursors for the formation of ground-level ozone. Knowledge of these emissions is critical to the understanding and mitigation of local air quality. NOx emissions from oil and gas production activities are not well described in commonly used emission inventories, and discrepancies of several factors have been found in the past. Here we present an easy and computationally efficient method to quantify NOx emissions from satellite NO2 observations that can be applied to evaluate common emission inventories and provide timely input for chemistry transport models. Using NO2 columns from the TROPOspheric Monitoring Instrument (TROPOMI), we calculated annually averaged NOx emissions from the divergence of NO2 column fluxes for six oil and gas production regions in the United States. Derived NOx emissions for the years 2018 to 2020 range between 4.8 and 81.1 t/day, and observed trends over time are consistent with changes in industrial activity. To evaluate the method, we compared our results with the fuel-based oil and gas NOx inventory (FOG) and performed sensitivity studies using model output from the Weather Research Forecasting model with Chemistry (WRF-Chem). We found that annually averaged NOx emissions from oil and gas production activities can in most cases be calculated within an uncertainty of 50%, while simultaneously derived emission maps show the spatial distribution of NOx emissions with a high level of detail. For future use, this method can easily be applied globally.

@en

This paper reports on consolidated ground-based validation results of the atmospheric NO2 data produced operationally since April 2018 by the TROPOspheric Monitoring Instrument (TROPOMI) on board of the ESA/EU Copernicus Sentinel-5 Precursor (S5P) satellite. Tropospheric, stratospheric, and total NO2 column data from S5P are compared to correlative measurements collected from, respectively, 19 Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS), 26 Network for the Detection of Atmospheric Composition Change (NDACC) Zenith-Scattered-Light DOAS (ZSL-DOAS), and 25 Pandonia Global Network (PGN)/Pandora instruments distributed globally. The validation methodology gives special care to minimizing mismatch errors due to imperfect spatiotemporal co-location of the satellite and correlative data, e.g. by using tailored observation operators to account for differences in smoothing and in sampling of atmospheric structures and variability and photochemical modelling to reduce diurnal cycle effects. Compared to the ground-based measurements, S5P data show, on average, (i) a negative bias for the tropospheric column data, of typically-23 % to-37 % in clean to slightly polluted conditions but reaching values as high as-51 % over highly polluted areas; (ii) a slight negative median difference for the stratospheric column data, of about-0:2 Pmolec cm-2, i.e. approx.-2 % in summer to-15 % in winter; and (iii) a bias ranging from zero to-50 % for the total column data, found to depend on the amplitude of the total NO2 column, with small to slightly positive bias values for columns below 6 Pmolec cm-2 and negative values above. The dispersion between S5P and correlative measurements contains mostly random components, which remain within mission requirements for the stratospheric column data (0.5 Pmolec cm-2) but exceed those for the tropospheric column data (0.7 Pmolec cm-2). While a part of the biases and dispersion may be due to representativeness differences such as different area averaging and measurement times, it is known that errors in the S5P tropospheric columns exist due to shortcomings in the (horizontally coarse) a priori profile representation in the TM5-MP chemical transport model used in the S5P retrieval and, to a lesser extent, to the treatment of cloud effects and aerosols. Although considerable differences (up to 2 Pmolec cm-2 and more) are observed at single ground-pixel level, the near-real-time (NRTI) and offline (OFFL) versions of the S5P NO2 operational data processor provide similar NO2 column values and validation results when globally averaged, with the NRTI values being on average 0.79 % larger than the OFFL values. @en

Measurements by the Dobson ozone spectrophotometer at the British Antarctic Survey's (BAS) Halley research station form a record of Antarctic total column ozone that dates back to 1956. Due to its location, length, and completeness, the record has been, and continues to be, uniquely important for studies of long-term changes in Antarctic ozone. However, a crack in the ice shelf on which it resides forced the station to abruptly close in February of 2017, leading to a gap of two ozone hole seasons in its historic record. We develop and test a method for filling in the record of Halley total ozone by combining and adjusting overpass data from a range of different satellite instruments. Comparisons to the Dobson suggest that our method reproduces monthly ground-based total ozone values with an average difference of 1.1±6.2DU for the satellites used to fill in the 2017-2018 gap. We show that our approach more closely reproduces the Dobson measurements than simply using the raw satellite average or data from a single satellite instrument. The method also provides a check on the consistency of the provisional data from the automated Dobson used at Halley after 2018 with earlier manual Dobson data and suggests that there were likely inconsistencies between the two. The filled Halley dataset provides further support that the Antarctic ozone hole is healing, not only during September but also in January.

@en

Nitrogen oxides (NO_x) are air pollutants critical to ozone and fine particle production in the troposphere. Here, we present fuel-based emission inventories updated to 2018, including for mobile source engines using the Fuel-based Inventory of Vehicle Emissions (FIVEs) and oil and gas production using the Fuel-based Oil and Gas (FOG) inventory. The updated FIVE emissions are now consistent with the NEI17 estimates differing within 2% across the contiguous US (CONUS). Tropospheric NO₂ columns modeled by the Weather Research and Forecasting with Chemistry model (WRF-Chem) are compared with those observed by TROPOspheric Monitoring Instrument (TROPOMI) and Ozone Monitoring Instrument (OMI) during the summer of 2018. Modeled NO₂ columns show strong temporal and spatial correlations with TROPOMI (OMI), identified with biases of −3% (−21%) over CONUS, and +8% (−6%) over point sources plus urban regions. Taking account of the negative bias (∼20%) in early version of TROPOMI over polluted regions, WRF-Chem shows good performance with updated FIVE and FOG emissions. Our model tends to under-predict the tropospheric NO₂ columns over background and rural regions (bias of −21% to −3%). Through model sensitivity analyses, we demonstrate the important roles of emissions from soils (11.7% average over CONUS), oil and gas production (4.1%), wildfires (10.6%), and lightning (2.3%) with greater contributions at regional scales. This work provides a roadmap for satellite-based evaluations for emission updates from various sources.

@en

Quantitative measurements of aerosol absorptive properties, e.g., the absorbing aerosol optical depth (AAOD) and the single scattering albedo (SSA), are important to reduce uncertainties of aerosol climate radiative forcing assessments. Currently, global retrievals of AAOD and SSA are mainly provided by the ground-based aerosol robotic network (AERONET), whereas it is still challenging to retrieve them from space. However, we found the AERONET AAOD has a relatively strong correlation with the satellite retrieved ultra-violet aerosol index (UVAI). Based on this, a numerical relation is built by a deep neural network (DNN) to predict global AAOD and SSA over land from the long-term UVAI record (2006-2019) provided by the ozone monitoring instrument (OMI) onboard Aura. The DNN predicted aerosol absorption is satisfying for samples with AOD at 550 nm larger than 0.1, and the DNN model performance is better for smaller absorbing aerosols (e.g., smoke) than larger ones (e.g., mineral dust). The comparison of the DNN predictions with AERONET shows a high correlation coefficient of 0.90 and a root mean square of 0.005 for the AAOD, and over 80% of samples are within the expected uncertainty of AERONET SSA (pm0.03).

@en

The TROPOspheric Monitoring Instrument (TROPOMI) level-2 aerosol layer height (ALH) product has now been released to the general public. This product is retrieved using TROPOMI's measurements of the oxygen A-band, radiative transfer model (RTM) calculations augmented by neural networks and an iterative optimal estimation technique. The TROPOMI ALH product will deliver ALH estimates over cloud-free scenes over the ocean and land that contain aerosols above a certain threshold of the measured UV aerosol index (UVAI) in the ultraviolet region. This paper provides background for the ALH product and explores its quality by comparing ALH estimates to similar quantities derived from spaceborne lidars observing the same scene. The spaceborne lidar chosen for this study is the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) mission, which flies in formation with NASA's A-train constellation since 2006 and is a proven source of data for studying ALHs. The influence of the surface and clouds is discussed, and the aspects of the TROPOMI ALH algorithm that will require future development efforts are highlighted. A case-by-case analysis of the data from the four selected cases (mostly around the Saharan region with approximately 800 co-located TROPOMI pixels and CALIOP profiles in June and December 2018) shows that ALHs retrieved from TROPOMI using the operational Sentinel-5 Precursor Level-2 ALH algorithm is lower than CALIOP aerosol extinction heights by approximately 0.5km. Looking at data beyond these cases, it is clear that there is a significant difference when it comes to retrievals over land, where these differences can easily go over 1km on average.

@en

China's policy interventions to reduce the spread of the coronavirus disease 2019 have environmental and economic impacts. Tropospheric nitrogen dioxide indicates economic activities, as nitrogen dioxide is primarily emitted from fossil fuel consumption. Satellite measurements show a 48% drop in tropospheric nitrogen dioxide vertical column densities from the 20 days averaged before the 2020 Lunar New Year to the 20 days averaged after. This decline is 21±5% larger than that from 2015 to 2019. We relate this reduction to two of the government's actions: the announcement of the first report in each province and the date of a province's lockdown. Both actions are associated with nearly the same magnitude of reductions. Our analysis offers insights into the unintended environmental and economic consequences through reduced economic activities.

@en

U.S. oil and natural gas production volumes have grown by up to 100% in key production areas between January 2017 and August 2019. Here we show that recent trends are visible from space and can be attributed to drilling, production, and gas flaring activities. By using oil and gas activity data as predictors in a multivariate regression to satellite measurements of tropospheric NO₂ columns, observed changes in NO₂ over time could be attributed to NO_x emissions associated with drilling, production and gas flaring for three select regions: the Permian, Bakken, and Eagle Ford basins. We find that drilling had been the dominant NO_x source contributing around 80% before the downturn in drilling activity in 2015. Thereafter, NO_x contributions from drilling activities and combined production and flaring activities are similar. Comparison of our top-down source attribution with a bottom-up fuel-based oil and gas NO_x emission inventory shows agreement within error margins.

@en

Production of oil and natural gas in North America is at an all-time high due to the development and use of horizontal drilling and hydraulic fracturing. Methane emissions associated with this industrial activity are a concern because of the contribution to climate radiative forcing. We present new measurements from the space-based TROPOspheric Monitoring Instrument (TROPOMI) launched in 2017 that show methane enhancements over production regions in the United States. In the Uintah Basin in Utah, TROPOMI methane columns correlated with in-situ measurements, and the highest columns were observed over the deepest parts of the basin, consistent with the accumulation of emissions underneath inversions. In the Permian Basin in Texas and New Mexico, methane columns showed maxima over regions with the highest natural gas production and were correlated with nitrogen-dioxide columns at a ratio that is consistent with results from in-situ airborne measurements. The improved detail provided by TROPOMI will likely enable the timely monitoring from space of methane emissions associated with oil and natural gas production.

@en

Spaceborne NO₂ column observations from two high-resolution instruments, Tropospheric Monitoring Instrument (TROPOMI) on board Sentinel-5 Precursor and Ozone Monitoring Instrument (OMI) on Aura, reveal unprecedented NO₂ decreases over China, South Korea, western Europe, and the United States as a result of public health measures enforced to contain the coronavirus disease outbreak (Covid-19) in January–April 2020. The average NO₂ column drop over all Chinese cities amounts to −40% relative to the same period in 2019 and reaches up to a factor of ~2 at heavily hit cities, for example, Wuhan, Jinan, while the decreases in western Europe and the United States are also significant (−20% to −38%). In contrast with this, although Iran is also strongly affected by the disease, the observations do not show evidence of lower emissions, reflecting more limited health measures.

@en

The purpose of this study is to demonstrate the role of aerosol layer height (ALH) in quantifying the single scattering albedo (SSA) from ultraviolet satellite observations for biomass burning aerosols. In the first experiment, we retrieve SSA by minimizing the near-ultraviolet (near-UV) absorbing aerosol index (UVAI) difference between observed values and those simulated by a radiative transfer model. With the recently released S-5P TROPOMI ALH product constraining forward simulations, a significant gap in the retrieved SSA (0.25) is found between radiative transfer simulations with spectral flat aerosols and those with strong spectrally dependent aerosols, implying that inappropriate assumptions regarding aerosol absorption spectral dependence may cause severe misinterpretations of the aerosol absorption. In the second part of this paper, we propose an alternative method to retrieve SSA based on a long-term record of co-located satellite and ground-based measurements using the support vector regression (SVR) approach. This empirical method is free from the uncertainties due to the imperfection of a priori assumptions on aerosol microphysics seen in the first experiment. We present the potential capabilities of SVR using several fire events that have occurred in recent years. For all cases, the difference between SVR-retrieved SSA and AERONET are generally within ±0:05, and over half of the samples are within ±0:03. The results are encouraging, although in the current phase the model tends to overestimate the SSA for relatively absorbing cases and fails to predict SSA for some extreme situations. The spatial contrast in SSA retrieved by radiative transfer simulations is significantly higher than that retrieved by SVR, and the latter better agrees with SSA from MERRA-2 reanalysis. In the future, more sophisticated feature selection procedures and kernel functions should be taken into consideration to improve the SVR model accuracy. Moreover, the high-resolution TROPOMI UVAI and co-located ALH products will guide us to more reliable training data sets and more powerful algorithms to quantify aerosol absorption from UVAI records.

@en