Many large rivers in the world delivers decreasing sediment loads to coastal oceans owing to reductions in sediment yield and disrupted sediment deliver. Understanding the sediment load regime is a prerequisite of sediment management and fluvial and deltaic ecosystem restoration. This work examines sediment load changes across the Changjiang River basin based on a long time series (1950–2017) of sediment load data stretching from the headwater to the delta. We find that the sediment loads have decreased progressively throughout the basin at multiple time scales. The sediment loads have decreased by ~96% and ~74% at the outlets of the upper basin and entire basin, respectively, in 2006–2017 compared to 1950–1985. The hydropower dams in the mainstem have become a dominant cause of the reduction, although downstream channel erosion causes moderate sediment load recovery. The basin-scale sediment connectivity has declined as the upper river is progressively dammed, the middle-lower river is leveed and river-lake interplay weakens. The middle-lower river has changed from a slight depositional to a severe erosional environment, from a sediment transport conduit to a new sediment source zone, and from a transport-limited to a supply-limited condition. These low-level sediment loads will likely persist in the future considering the cumulative dam trapping and depleted channel erosion. As a result, substantial hydro-morphological changes have occurred that affect the water supply, flood mitigation, and the aquatic ecosystem. The findings and lessons in this work can shed light on other large river systems subject to intensified human interference.@en

The dielectric breakdown approach for forming nanopores has greatly accelerated the pace of research in solid-state nanopore sensing, enabling inexpensive formation of nanopores via a bench top setup. Here the potential of tip-controlled local breakdown (TCLB) to fabricate pores 100× faster, with high scalability and nanometer positioning precision using an atomic force microscope (AFM) is demonstrated. A conductive AFM tip is brought into contact with a silicon nitride membrane positioned above an electrolyte reservoir. Application of a voltage pulse at the tip leads to the formation of a single nanoscale pore. Pores are formed precisely at the tip position with a complete suppression of multiple pore formation. In addition, the approach greatly accelerates the electric breakdown process, leading to an average pore fabrication time on the order of 10 ms, at least two orders of magnitude shorter than achieved by classic dielectric breakdown approaches. With this fast pore writing speed over 300 pores can be fabricated in half an hour on the same membrane.

@en