We explore a new alternative for drones to gather information from sensors. Instead of using the traditional radio-frequency spectrum, whose broadcast nature makes it more difficult to poll specific objects, we utilize the light spectrum. In our system, the drone carries a light, and flies to an area that it is interested in polling. Only the sensor (tag) under the coverage of the light sends data back by backscattering the impinging light waves. Enabling this system poses two challenges. First, a reliable modulation method with light is required. The method must overcome noise dynamics introduced by the drone (mechanical oscillations), the object (backscattering effects) and the environment (interference from ambient light). Second, to facilitate the deployment of tags in pervasive applications, the design of the tag should be battery-less and have a small surface area. These requirements limit the amount of power available for reception, transmission and sensing, since the energy harvested by solar cells is proportional to their surface area. Regarding the first challenge, we show that the amplitude-based modulation methods used in state-of-the-art studies do not work in our scenario, and investigate instead a frequency-based approach. For the second challenge, we optimize the computation, reception and transmission of the tag to create a battery-less design that operates with frequency-modulated signals generated from light. We build a prototype for the drone and the tag, and test them under different lighting scenarios: dark, indoors, and outdoors with sunlight. The results show that, under standard indoor lighting, our system can attain a polling range of 1.1 m with a data rate of 120 bps, while the tag operates with small solar cells and consumes less than 1 mW.@en

Introducing Chirpy, a hardware module designed for swarm robots that enables them to locate each other and communicate through audio. With the help of its deep learning module (AudioLocNet), Chirpy is capable of performing localization in challenging environments, such as those with non-line-of-sight and reverb. To support concurrent transmission, Chirpy uses orthogonal audio chirps and has an audio message frame design that balances localization accuracy and communication speed. As a result, a swarm of robots equipped with Chirpies can on-the-fly construct a path (or a potential field) to a location of interest without the need for a map, making them ideal for tasks such as search and rescue missions. Our experiments show that Chirpy can decode messages from four concurrent transmissions with a Bit Error Rate (BER) of at a distance of 250 cm, and it can communicate at Signal-to-Noise Ratios (SNRs) as low as -32 dB while maintaining ≈ 0 BER. Furthermore, AudioLocNet demonstrates high accuracy in classifying the location of a transmitter, even in adverse conditions such as non-line-of-sight and reverberant environments.

@en