Tianjin, one of the so-called Treaty Ports that opened to foreign trade under the unequal treaties was home to nine foreign concessions. In each concession, the foreign powers created urban forms and functions that mirrored practices in their respective home countries. This article explores the consecutive establishment and implementation of regulations in eight out of nine foreign concessions in Tianjin between 1860 and 1945. It firstly provides an overview of regulation types and legislative systems of the concessions. Secondly, it compares these regulations and bylaws with the ones in their home countries. Thirdly, it compares the specific cases of Tianjin concessions with each other. Finally, it places the Tianjin case in the context of other Chinese port city concessions. In conclusion, it argues that the regulations of concessions in Tianjin not only showed a strong influence from their home countries in a top-down setting, but also interacted with each other in a peer-to-peer setting. The circulation of these regulations, within Tianjin and among treaty ports in China, was promoted by governments’ central control, municipal councils’ intervention and individuals’ movements from one place to another.@en

A high demand for heating energy in winter, overheating in summer and visual discomfort are important issues in school buildings in the cold climate of China. This study presents the use of simulation–optimization tools to find the optimal trade-off between minimizing energy use for heating and lighting, reducing summer discomfort time and maximizing the Useful Daylight Illuminance (UDI_avg, between 100 and 2000 lx). Different spatial configurations were investigated, including a single-sided open corridor type, a single-sided enclosed corridor type and a double-sided corridor type school. The following passive design parameters were considered in the optimization analysis: orientation, room depth and corridor depth, window-to-wall ratio of different interfaces, glazing materials and shading types. The results of the optimization study show that the energy demand for heating and lighting can be reduced by 24–28% and summer thermal discomfort by 9–23% while the UDI_avg (100–2000 lx) can simultaneously increase by 15–63%. Considering all three aspects, the double-sided enclosed corridor type performs best due to its energy performance while the one-sided enclosed corridor type is the least suitable for the cold climate because of its relatively poor visual comfort quality. In addition, the passive design parameters should be carefully considered as each spatial configuration has its own optimal passive design parameters.

@en

This paper discusses the energy impact of corridor design for school buildings in the cold climate of China. Local school buildings were classified into three types in terms of the corridor design patterns. Architectural related parameters of corridors which could have a potential impact on the energy consumption were summarized and discussed, including form and orientation, temperature control, opaque envelope components, glazing, ventilation and infiltration. The annual heating, cooling, lighting and total energy consumption were compared. Results showed that form and orientation have the most significant influence on building energy consumption while opaque envelope insulation of corridors shows the least effect on energy demand. By combining the most beneficial strategies at each step, this study resulted in a better performing corridor design that increases the energy-saving by around 6% for the double-sided corridor building type and 17% for the one-sided enclosed corridor type of school building respectively.@en

European, American, and Japanese debates on public housing served as models for those in modern China, and Chinese scholars and professionals, with the support of the KMT (Kuomintang), developed public housing as a sign of innovation in both societal reform and building typology. Using the under-researched case of Tianjin's public housing during the so-called Nanjing Decade (1928–1937) and then again during the Japanese Occupation (1937–1945) as case studies, the paper first explores how journals, books, and foreign-trained Chinese scholars introduced the concept of public housing to China. It then examines five public housing projects that municipal authorities developed for Tianjin, two in the Nanjing Decade and three during the Japanese Occupation. Analysing the sites, architectural designs, and management rules of these projects, the paper argues that the projects in the Nanjing Decade (both planned and realized) mostly targeted poor families, serving to simultaneously solve housing problems, reform society, and police the poor; while the projects during the Japanese Occupation benefited high-income people or the Japanese, and did not play a role in the relief of the local poor, who suffered most from the housing shortage.@en

This paper discusses the role of geometry parameters including building shape, window to wall ratio, room depth, and orientation on the energy use and thermal comfort of school buildings in cold climates of China. The annual total energy demand and summer thermal discomfort time were compared through computer simulations with DesignBuilder. Furthermore, a questionnaire was conducted that related to the students’ subjective preference for various building geometry parameters. Results showed that a maximum of 13.6% of energy savings and 3.8% of thermal comfort improvement when compared to the reference case could be achieved through variations in geometry parameters. The H shape performed the best when the building thermal performance and students’ preferences were considered, as well as the various design options for rchitects. Window to wall ratio, room depth, and orientation should also be carefully addressed in terms of different building types. The results of this study can serve as a reference for architects and school managers in the early design stages of schools in cold climates of China.@en

A good school design consists of a thermally comfortable school and schoolyard as well as a low energy consumption of the school building. The main contribution of this study is that it develops an integrated design approach to systematically evaluate and optimize school design parameters at different design stages for summer outdoor thermal comfort and building cooling demand. A typical school in northern China was selected to illustrate the simulation-based design framework. The three-dimensional microclimate model ENVI-met was used to calculate outdoor temperatures and the Physiological Equivalent Temperature (PET) index as a measure of the outdoor thermal comfort condition. The ENVI-met results were then used as input for the thermal boundary conditions in the energy simulation software DesignBuilder. DesignBuilder, in turn, was applied to calculate the building cooling demand while taking into account the local outdoor thermal conditions. The integrated design approach proves to be effective for mitigating school heat stress and energy saving. By taking the school case as a reference, the integrated design method resulted in a high-performance design that reduced the outdoor discomfort time by 25% and the building cooling demand by 5%. Planting trees was found to be the most effective considering both the outdoor thermal comfort and building cooling demand. Other implications for planning and designing schools in terms of the school case are also presented in order to help architects in selecting strategies that enhance the thermal performance characteristics of both the school building and the schoolyard.@en

Receiver deghosting for seismic streamer data is a longstanding challenge in seismic data processing. We propose a novel 3D receiver deghosting method, which is capable of handling both horizontal and slanted streamer data in a theoretically rigorous manner. Our method honors the wave propagation phenomena in a true 3D sense, and L1 inversion is the mathematical engine behind our method. Furthermore, in order to better meet the L1 constraint, we also designed a redundant hybrid Radon dictionary for our method to work with. A synthetic dataset from a modified 3D EAGE/SEG Overthrust model and a Red Sea field dataset are used to demonstrate our method, and results are successful.@en