Break-junction techniques provide the possibility to study electric and thermoelectric properties of single-molecule junctions in great detail. These techniques rely on the same principle of controllably breaking metallic contacts in order to create single-molecule junctions, whilst keeping track of the junction's conductance. Here, we compare results from mechanically controllable break junction (MCBJ) and scanning tunneling microscope (STM) methods, while characterizing conductance properties of the same novel mechanosensitive para- and meta-connected naphtalenophane compounds. In addition, thermopower measurements are carried out for both compounds using the STM break junction (STM-BJ) technique. For the conductance experiments, the same data processing using a clustering analysis is performed. We obtain to a large extent similar results for both methods, although values of conductance and stretching lengths for the STM-BJ technique are slightly larger in comparison with the MCBJ. STM-BJ thermopower experiments show similar Seebeck coefficients for both compounds. An increase in the Seebeck coefficient is revealed, whilst the conductance decreases, after which it saturates at around 10 μV K−1. This phenomenon is studied theoretically using a tight binding model. It shows that changes of molecule-electrode electronic couplings combined with shifts of the resonance energies explain the correlated behavior of conductance and Seebeck coefficient.@en

The addition of a lateral alkyl chain is a well-known strategy to reduce π-stacked ensembles of molecules in solution, with the intention to minimize the interactions between the molecules’ backbones. In this paper, we study whether this concept generalizes to single-molecule junctions by using a combination of mechanically controllable break junction (MCBJ) measurements and clustering-based data analysis with two small series of model compounds decorated with various bulky groups. The systematic study suggests that introducing alkyl side chains also favors the formation of electrode-molecule configurations that are not observed in their absence, thereby inducing broadening of the conductance peak in the one-dimensional histograms. Thus, the introduction of alkyl chains in aromatic compounds for molecular electronics must be carefully designed and optimized for the specific purpose, balancing between increased solubility and the possibility of additional junction configurations.

@en

The possibility to study quantum interference phenomena at ambient conditions is an appealing feature of molecular electronics. By connecting two porphyrins in a cofacial cyclophane, we create an attractive platform for mechanically controlling electric transport through the intramolecular extent of π-orbital overlap of the porphyrins facing each other and through the angle of xanthene bridges with regard to the porphyrin planes. We analyze theoretically the evolution of molecular configurations in the pulling process and the corresponding changes in electric conduction by combining density functional theory (DFT) with Landauer scattering theory of phase-coherent elastic transport. Predicted conductances during the stretching process show order of magnitude variations caused by two robust destructive quantum interference features that span through the whole electronic gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). Mechanically-controlled break junction (MCBJ) experiments at room temperature verify the mechanosensitive response of the molecular junctions. During the continuous stretching of the molecule, they show conductance variations of up to 1.5 orders of magnitude over single breaking events. Uncommon triple-and quadruple-frequency responses are observed in periodic electrode modulation experiments with amplitudes of up to 10 Å. This further confirms the theoretically predicted double transmission dips caused by the spatial and energetic rearrangement of molecular orbitals, with contributions from both through-space and through-bond transport. This journal is

@en

Probing the universal low-temperature magnetic-field scaling of Kondo-correlated quantum dots via electrical conductance has proved to be experimentally challenging. Here, we show how to probe this in nonlinear thermocurrent spectroscopy applied to a molecular quantum dot in the Kondo regime. Our results demonstrate that the bias-dependent thermocurrent is a sensitive probe of universal Kondo physics, directly measures the splitting of the Kondo resonance in a magnetic field, and opens up possibilities for investigating nanosystems far from thermal and electrical equilibrium.

@en

Intra- and intermolecular interactions are dominating chemical processes, and their concerted interplay enables complex nonequilibrium states like life. While the responsible basic forces are typically investigated spectroscopically, a conductance measurement to probe and control these interactions in a single molecule far out of equilibrium is reported here. Specifically, by separating macroscopic metal electrodes, two π-conjugated, bridge-connected porphyrin decks are peeled off on one side, but compressed on the other side due to the covalent mechanical fixation. We observe that the conductance response shows an exceptional exponential rise by two orders of magnitude in individual breaking events during the stretching. Theoretical studies atomistically explain the measured conductance behavior by a mechanically activated increase in through-bond transport and a simultaneous strengthening of through-space coupling. Our results not only reveal the various interacting intramolecular transport channels in a molecular set of levers, but also the molecules' potential to serve as molecular electro-mechanical sensors and switches.@en

Direct measurement of single-molecule electrical transparency by break junction experiments has become a major field of research over the two last decades. This review specifically and comprehensively highlights the use of porphyrins as molecular components and discusses their potential use for the construction of future devices. Throughout the review, the features provided by porphyrins, such as low level misalignments and very low attenuation factors, are shown with numerous examples, illustrating the potential and limitations of these molecular junctions, as well as differences emerging from applied integration/investigation techniques.

@en

Quantum interference (QI) of electron waves passing through a single-molecule junction provides a powerful means to influence its electrical properties. Here, we investigate the correlation between substitution pattern, conductance, and mechanosensitivity in [2.2]paracyclophane (PCP)-based molecular wires in a mechanically controlled break junction experiment. The effect of the meta versus para connectivity in both the central PCP core and the phenyl ring connecting the terminal anchoring group is studied. We find that the meta-phenyl-anchored PCP yields such low conductance levels that molecular features cannot be resolved; in the case of para-phenyl-coupled anchoring, however, large variations in conductance values for modulations of the electrode separation occur for the pseudo-para-coupled PCP core, while this mechanosensitivity is absent for the pseudo-meta-PCP core. The experimental findings are interpreted in terms of QI effects between molecular frontier orbitals by theoretical calculations based on density functional theory and the Landauer formalism.

@en

Single molecules are nanoscale thermodynamic systems with few degrees of freedom. Thus, the knowledge of their entropy can reveal the presence of microscopic electron transfer dynamics that are difficult to observe otherwise. Here, we apply thermocurrent spectroscopy to directly measure the entropy of a single free radical molecule in a magnetic field. Our results allow us to uncover the presence of a singlet to triplet transition in one of the redox states of the molecule, not detected by conventional charge transport measurements. This highlights the power of thermoelectric measurements which can be used to determine the difference in configurational entropy between the redox states of a nanoscale system involved in conductance without any prior assumptions about its structure or microscopic dynamics.

@en

Quantum interference (QI) within a single-molecule junction has become an essential yet powerful concept to integrate for designing molecular electronic devices.1 Recently we have investigated the correlation between substitution pattern, conductance and mechanosensitivity in [2.2]paracyclophane(PCP)-based single-molecule junction via the mechanically controlled break junction technique (MCBJ).2,3 We study the influence on conductance when we introduce meta/para connection to the PCP core and the phenyl ring attached to the anchoring group. We find that (i) meta-phenyl-anchored PCP yields such low conductance levels that molecular features cannot be resolved; (ii) para-phenyl-coupled anchoring generally gives higher conductance levels which can be detected via MCBJ; (iii) pseudo-para-coupled PCP core manifests large mechanosensitivity while (iv) pseudo-meta-coupled PCP core show the absence of mechanosensitivity. These experimental findings are interpreted in terms of QI effects between molecular frontier orbitals by theoretical calculations based on density functional theory and the Landauer formalism.@en

Porphyrin cyclophane 1, consisting of two rigidly fixed but still movable cofacial porphyrins and exposing acetate-masked thiols in opposed directions of the macrocycle, is designed, synthesized, and characterized. The functional cyclophane 1, as pioneer of mechanosensitive 3D materials, forms stable single-molecule junctions in a mechanically controlled break-junction setup. Its reliable integration in a single-molecule junction is a fundamental prerequisite to explore the potential of these structures as mechanically triggered functional units and devices.

@en

The bowl-shaped, 3-fold interlinked porphyrin dimer 2 was obtained in respectable yields during macrocyclization attempts. Its bicyclic structure, consisting of a macrocycle made of a pair of acetylene interlinked tetraphenylporphyrins which are additionally linked by a C-C bond interlinking two pyrrole subunits, has been confirmed spectroscopically (2D-NMR, UV/vis, HR-MALDI-ToF MS). Late-stage functionalization provided the structural analogue 1 with acetyl-protected terminal thiol anchor groups enabling single molecule transport investigations in a mechanically controlled break junction experiment. The formation of single-molecule junctions was observed, displaying large variations in the observed conductance values pointing at a rich diversity in the molecular junctions.

@en

A new concept to improve the reliability of functional single molecule junctions is presented using the E-field triggered switching of Fe^IIbis-terpyridine complexes in a mechanically controlled break junction experiment as model system. The complexes comprise a push-pull ligand sensing the applied E-field and the resulting distortion of the Fe^II ligand field is expected to trigger a spin-crossover event reflected in a sudden jump of the transport current. By molecular engineering, the active centre of the complex is separated from the gold electrodes in order to eliminate undesired side-effects. Two aspects are considered to isolate the central metal ion, namely the spacing by introducing additional alkynes, and the steric shielding achieved by bulky isopropyl groups. With this small series of model complexes, a pronounced correlation is observed between the occurrence of bistable junctions and the extent of separation of the central metal ion, affirming the hypothesized Enhanced Separation Concept (ESC).

@en

Porphyrin derivatives are key components in natural machinery enabling us to store sunlight as chemical energy. In spite of their prominent role in cascades separating electrical charges and their potential as sensitizers in molecular devices, reports concerning their electronic transport characteristics are inconsistent. Here we report a systematic investigation of electronic transport paths through single porphyrin junctions. The transport through seven structurally related porphyrin derivatives was repeatedly measured in an automatized mechanically controlled break-junction set-up and the recorded data were analyzed by an unsupervised clustering algorithm. The correlation between the appearances of similar clusters in particular sub-sets of the porphyrins with a common structural motif allowed us to assign the corresponding current path. The small series of model porphyrins allowed us to identify and distinguish three different electronic paths covering more than four orders of magnitude in conductance.

@en

A great interest of molecular electronics comes from its change in electronic structure through external stimuli, which provides functionality at the single-molecule level. Mechanically-controlled break junction (MCBJ) is a great tool for characterizing molecular properties and their response to different stimuli including light, solvent and importantly, mechanical deformation1. In our recent MCBJ experiment, we showed that the conductance of a spring-like molecule can be mechanically tuned up to an order of magnitude at room temperature2. The physical origin of such feature is a consequence of destructive quantum interference between the frontier orbitals. This indicates not only a possible application for mechanical sensors based on this class of molecules, but also demonstrates a good example of quantum interference effect in single molecules. Following this intriguing result, we investigate other properties of this molecule, such as I-V characteristics at low temperature and thermopower. We are also exploring other molecules with similar spring-like structures, where quantum interference effect is expected to manifest. @en

An appealing feature of molecular electronics is the possibility of inducing changes in the orbital structure through external stimuli. This can provide functionality on the single-molecule level that can be employed for sensing or switching purposes if the associated conductance changes are sizable upon application of the stimuli. Here, we show that the room-temperature conductance of a spring-like molecule can be mechanically controlled up to an order of magnitude by compressing or elongating it. Quantum-chemistry calculations indicate that the large conductance variations are the result of destructive quantum interference effects between the frontier orbitals that can be lifted by applying either compressive or tensile strain to the molecule. When periodically modulating the electrode separation, a conductance modulation at double the driving frequency is observed, providing a direct proof for the presence of quantum interference. Furthermore, oscillations in the conductance occur when the stress built up in the molecule is high enough to allow the anchoring groups to move along the surface in a stick-slip-like fashion. The mechanical control of quantum interference effects results in the largest-gauge factor reported for single-molecule devices up to now, which may open the door for applications in, e.g., a nanoscale mechanosensitive sensing device that is functional at room temperature.

@en

We investigate transport through mechanically triggered single-molecule switches that are based on the coordination sphere-dependent spin state of Fe^II-species. In these molecules, in certain junction configurations the relative arrangement of two terpyridine ligands within homoleptic Fe^II-complexes can be mechanically controlled. Mechanical pulling may thus distort the Fe^II coordination sphere and eventually modify their spin state. Using the movable nanoelectrodes in a mechanically controlled break-junction at low temperature, current-voltage measurements at cryogenic temperatures support the hypothesized switching mechanism based on the spin-crossover behavior. A large fraction of molecular junctions formed with the spin-crossover-active Fe^II-complex displays a conductance increase for increasing electrode separation and this increase can reach 1-2 orders of magnitude. Theoretical calculations predict a stretching-induced spin transition in the Fe^II-complex and a larger transmission for the high-spin configuration.

@en