This study explores the application of a novel transfer-free method for the synthesis of multilayer Chemical Vapour Deposition (CVD) graphene directly on transparent sub-strates, specifically to create transparent Microelectrode Arrays (MEAs) for optogenetic studies. Traditional methods typically involve a graphene transfer step that can compromise the material's integrity and electrical properties. By eliminating this step, our approach simplifies the fabrication process. The developed MEAs were characterised by Raman spectroscopy, op-tical transmittance, and electrochemical impedance spectroscopy. We also assessed the stability and recording capabilities of the fabricated MEAs, alongside a comparative assessment with a commercial MEA. Turbostratic graphene grown directly on quartz and sapphire was successfully achieved. Our transfer-free MEAs exhibit promising signal detection capabilities, despite a relatively high baseline noise of ∼ 23μ V. and a significantly large impedance at 1 kHz (3.2 to 9.89 M Ω) surpassing values in other studies. The devices exhibited low stability after exposure to liquid media during the soaking and ageing tests, causing large variations in the electrochemical measurements post-exposure. This was due to the permeability of the encapsulation layer and the biodegradability of the molybdenum structures, which led to significant structural and chemical changes in the devices. While further work is required to prevent the failure mechanisms of the device, this study demonstrates the feasibility of transparent MEA fabrication by means of a transfer-free approach directly on quartz substrates.

@en

In this study, we combined finite element method (FEM) based on Ansys and Noesis Optimus software to investigate the effect of bump structures and loading conditions on the electromigration properties of solder bumps in WLCSP. A numerical model considering current density, vacancy concentration, stress and temperature was utilized to calculate the vacancy concentration in solder bumps. The Optimus is an optimization software which can be used to perform the design of experiment (DOE) and sensitivity analysis. To optimize the bump structure, the DOE and response surface modeling (RSM) analysis were performed by using Noesis Optimus. The design optimization based on Noesis Optimus has three main advantages. First, the sensitivity analysis based on DOE results helps to find the most contributing factors. Second, it saves huge time because hundreds of experiments can be executed automatically. Third, it is able to perform evolutionary design optimization directly on RSM to identify the design’s optimal performance point. The maximum and concentration around solder were selected as the index to evaluate the effect of parameter combination on electromigration properties.@en

To unlock new research possibilities by acquiring control of action potential (AP) morphologies in excitable cells, we developed an opto-electronic feedback loop-based system integrating cellular electrophysiology, real-time computing, and optogenetic approaches and applied it to monolayers of heart muscle cells. This allowed accurate restoration and preservation of cardiac AP morphologies in the presence of electrical perturbations of different origin in an unsupervised, self-regulatory manner, without any prior knowledge of the disturbance. Moreover, arbitrary AP waveforms could be enforced onto these cells. Collectively, these results set the stage for the refinement and application of opto-electronic control systems to enable in-depth investigation into the regulatory role of membrane potential in health and disease.

@en

Atrial fibrillation (AF) is the most prevalent cardiac arrhythmia, progressive in nature, and known to have a negative impact on mortality, morbidity, and quality of life. Patients requiring acute termination of AF to restore sinus rhythm are subjected to electrical cardioversion, which requires sedation and therefore hospitalization due to pain resulting from the electrical shocks. However, considering the progressive nature of AF and its detrimental effects, there is a clear need for acute out-of-hospital (i.e., ambulatory) cardioversion of AF. In the search for shock-free cardioversion methods to realize such ambulatory therapy, a method referred to as optogenetics has been put forward. Optogenetics enables optical control over the electrical activity of cardiomyocytes by targeted expression of light-activated ion channels or pumps and may therefore serve as a means for cardioversion. First proof-of-principle for such light-induced cardioversion came from in vitro studies, proving optogenetic AF termination to be very effective. Later, these results were confirmed in various rodent models of AF using different transgenes, illumination methods, and protocols, whereas computational studies in the human heart provided additional translational insight. Based on these results and fueled by recent advances in molecular biology, gene therapy, and optoelectronic engineering, a basis is now being formed to explore clinical translations of optoelectronic control of cardiac rhythm. In this review, we discuss the current literature regarding optogenetic cardioversion of AF to restore normal rhythm in a shock-free manner. Moreover, key translational steps will be discussed, both from a biological and technological point of view, to outline a path toward realizing acute shock-free ambulatory termination of AF.

@en