Correction to: Nature Reviews Earth & Environment https://doi.org/10.1038/s43017-023-00507-9, published online 23 January 2024.

In the version of the article initially published, in Fig. 5, under “Radar altimeter”, “O(16–160 m)” previously read “O(16–160 km)”. This has now been corrected in the HTML and PDF versions of the article.

@en

Surface melting occurs across many of Antarctica’s ice shelves, mainly during the austral summer. The onset, duration, area and fate of surface melting varies spatially and temporally, and the resultant surface meltwater is stored as ponded water (lakes) or as slush (saturated firn or snow), with implications for ice-shelf hydrofracture, firn air content reduction, surface energy balance and thermal evolution. This study applies a machine-learning method to the entire Landsat 8 image catalogue to derive monthly records of slush and ponded water area across 57 ice shelves between 2013 and 2021. We find that slush and ponded water occupy roughly equal areas of Antarctica’s ice shelves in January, with inter-regional variations in partitioning. This suggests that studies that neglect slush may substantially underestimate the area of ice shelves covered by surface meltwater. Furthermore, we found that adjusting the surface albedo in a regional climate model to account for the lower albedo of surface meltwater resulted in 2.8 times greater snowmelt across five representative ice shelves. This extra melt is currently unaccounted for in regional climate models, which may lead to underestimates in projections of ice-sheet melting and ice-shelf stability.

@en

Despite in-situ observations of perennial firn aquifers (PFAs) at specific locations of the Antarctic ice sheet, a comprehensive continent-wide mapping of PFA distribution is currently lacking. We present an estimate of their distribution across Antarctica in the form of a probability assessment using a Monte Carlo technique. Our approach involves a novel methodology that combines observations from Sentinel-1 and Advanced SCATterometer (ASCAT) with output from a regional climate model. To evaluate our method, we conduct an extensive comparison with Operation Ice Bridge observations from the Greenland Ice Sheet. Application to Antarctica reveals high PFA probabilities in the Antarctic Peninsula (AP), particularly along its northern, northwestern, and western coastlines, as well as on the Wilkins, Müller, and George VI ice shelves. Outside the AP, PFA probability is low, except for some locations with marginally higher probabilities, such as on the Abbot, Totten, and Shackleton ice shelves.

@en

Assessing the Surface Mass Balance (SMB) of the Antarctic Ice Sheet is crucial for understanding its response to climate change. Synthetic Aperture Radar observations from Sentinel-1 provide the potential to monitor the variability of SMB processes through changes in the scattering response of near-surface and internal snow layers. However, the interplay between several factors, such as accumulation, wind erosion, deposition, and melt, complicates the interpretation of scattering changes of the microwave signal. Additionally, lack of reliable ground truth measurements of the snow surface limits our capability to associate the SMB processes with dominant scattering mechanism. In this study, we aim to quantify the dominant scattering in Sentinel-1 signal and evaluate the scattering changes in drifting snow-dominated regions of East Antarctica. We introduce a scattering indicator, alpha -{text{scat},varepsilon }, derived from scattering-type and entropy descriptors, providing a measure between volume and pure scattering. By relating the field measurements to alpha -{text{scat},varepsilon }, we establish that the evolution of dominant scattering in the presence of snowdrift is complex. First, alpha -{text{scat},varepsilon } strongly correlates with surface roughness (R^{2}=0.92, RMSE =2^circ). Spatially variable erosion patterns significantly increase the roughness and result in a strong affinity towards pure scattering despite net accumulation. Second, high surface densities also tend to influence pure scattering; however, the effect is dependent on the accumulation rate. With more accumulation, we observe an increasing dominance of volume scattering from internal snow layers. Long-term trends in alpha -{text{scat},varepsilon } (2017/2023) further suggest that it is challenging to address the causes behind the scattering source based on a single snow surface process. We thus demonstrate the potential and limitations of alpha -{text{scat},varepsilon } to infer the variability in dominant scattering from changes in surface processes.

@en

Most of the Greenland and Antarctic ice sheets are covered with firn — the transitional material between snow and glacial ice. Firn is vital for understanding ice-sheet mass balance and hydrology, and palaeoclimate. In this Review, we synthesize knowledge of firn, including its formation, observation, modelling and relevance to ice sheets. The refreezing of meltwater in the pore space of firn currently prevents 50% of meltwater in Greenland from running off into the ocean and protects Antarctic ice shelves from catastrophic collapse. Continued atmospheric warming could inhibit future protection against mass loss. For example, warming in Greenland has already contributed to a 5% reduction in firn pore space since 1980. All projections of future firn change suggest that surface meltwater will have an increasing impact on firn, with melt occurring tens to hundreds of kilometres further inland in Greenland, and more extensively on Antarctic ice shelves. Although progress in observation and modelling techniques has led to a well-established understanding of firn, the large uncertainties associated with meltwater percolation processes (refreezing, ice-layer formation and storage) must be reduced further. A tighter integration of modelling components (firn, atmosphere and ice-sheet models) will also be needed to better simulate ice-sheet responses to anthropogenic warming and to quantify future sea-level rise.

@en

While the influence of surface melt on Antarctic ice shelf stability can be large, the duration and affected area of melt events are often small. Therefore, melt events are difficult to capture with remote sensing, as satellite sensors always face the trade-off between spatial and temporal resolution. To overcome this limitation, we developed UMelt: a surface melt record for all Antarctic ice shelves with a high spatial (500 m) and high temporal (12 h) resolution for the period 2016–2021. Our approach is based on a deep learning model, specifically a U-Net, which was developed in Google Earth Engine. The U-Net combines microwave remote sensing observations from three sources: Sentinel-1, Special Sensor Microwave Imager/Sounder (SSMIS), and Advanced Scatterometer (ASCAT). The U-Net was trained on the Shackleton Ice Shelf for melt seasons 2017–2021, using the fine-scale melt patterns of Sentinel-1 as reference data and SSMIS, ASCAT, a digital elevation model, and multi-year Sentinel-1 melt fraction as predictors. The trained U-Net performed well on the Shackelton Ice Shelf for test melt season 2016–2017 (accuracy: 91.3%; F1-score: 86.9%), and the Larsen C Ice Shelf, which was not considered during training (accuracy: 91.0%; F1-score: 89.3%). Using the trained U-Net model, we have successfully developed the UMelt record. UMelt allows Antarctic-wide surface melt to be detected at a small scale while preserving a high temporal resolution, which could lead to new insights into the response of ice shelves to a changing atmospheric forcing.

@en

Surface melt is an important driver of ice shelf disintegration and its consequent mass loss over the Antarctic Ice Sheet. Monitoring surface melt using satellite remote sensing can enhance our understanding of ice shelf stability. However, the sensors do not measure the actual physical process of surface melt, but rather observe the presence of liquid water. Moreover, the sensor observations are influenced by the sensor characteristics and surface properties. Therefore, large inconsistencies can exist in the derived melt estimates from different sensors. In this study, we apply state-of-the-art melt detection algorithms to four frequently used remote sensing sensors, i.e., two active microwave sensors, which are Advanced Scatterometer (ASCAT) and Sentinel-1, a passive microwave sensor, i.e., Special Sensor Microwave Imager/Sounder (SSMIS), and an optical sensor, i.e., Moderate Resolution Imaging Spectroradiometer (MODIS). We intercompare the melt detection results over the entire Antarctic Ice Sheet and four selected study regions for the melt seasons 2015-2020. Our results show large spatiotemporal differences in detected melt between the sensors, with particular disagreement in blue ice areas, in aquifer regions, and during wintertime surface melt. We discuss that discrepancies between sensors are mainly due to cloud obstruction and polar darkness, frequency-dependent penetration of satellite signals, temporal resolution, and spatial resolution, as well as the applied melt detection methods. Nevertheless, we argue that different sensors can complement each other, enabling improved detection of surface melt over the Antarctic Ice Sheet.

@en

River ice is a major contributor to flood risk in cold regions due to the physical impediment of flow caused by ice jamming. Although a variety of classifiers have been developed to distinguish ice types using HH or VV intensity of SAR data, mostly based on data from RADARSAT-1 and -2, these classifiers still experience problems with breakup classification, because meltwater development causes overlap in co-polarization backscatter intensities of open water and sheet ice pixels. In this study, we develop a Random Forest classifier based on multiple features of Sentinel-1 data for three main classes generally present during breakup: rubble ice, sheet ice and open water, in a case study over the Athabasca River in Canada. For each ice stage, intensity of the VV and VH backscatter, pseudo-polarimetric decomposition parameters and Grey Level Co-occurrence Matrix texture features were computed for 70 verified sample areas. Several classifiers were developed, based on i) solely intensity features or on ii) a combination of intensity, pseudo-polarimetric and texture features and each classifier was evaluated based on Recursive Feature Elimination with Cross-Validation and pair-wise correlation of the studied features. Results show improved classifier performance when including GLCM mean of VV intensity, and VH intensity features instead of the conventional classifier based solely on intensity. This highlights the complementary nature of texture and intensity for the classification of breaking river ice. GLCM mean incorporates spatial patterns of the co-polarized intensity and sensitivity to context, while VH intensity introduces cross-polarized surface and volume scattering signals and is less sensitive to wind than the commonly used co-polarized intensity. We conclude that the proposed method based on the combination of texture and intensity features is suitable for and performs well in physically complex situations such as breakup, which are hard to classify otherwise. This method has a high potential for classifying river ice operationally, also for data from other SAR missions. Since it is a generic approach, it also has potential to classify river ice along other rivers globally.@en