In many countries, recent boosts in the construction and renovation sectors and energy efficiency directives are driving a growing interest in the built environment among designers and maintainers. In this context, customized software solutions tailored for Building Information Modelling (BIM) and Building Energy Modelling (BEM) are proving to be indispensable for optimizing operational efficiency within the Architecture, Engineering, Construction, Owner, and Operator (AECOO) sector and for facilitating the generation of buildings' Digital Twins (DTs). These DTs rely on accurate geometry and ancillary information (semantics, sensors, etc.) to define properties of single elements, enabling crucial simulations in structural conditions or energy needs. However, BIM and BEM model creation and their enrichment with semantic information are highly time-consuming and prone to manual errors. Hence, there is an increasing demand for automatic methods featuring a high level of geometric accuracy to reconstruct building elements, such as walls, floors, and openings captured via 3D reality-based surveying. This paper introduces an automated method for creating Boundary Representation (B-Rep) models from 3D surveying data for the generation of digital building replicas. The method is based on the detection and computation of topological elements from 3D reality-based point clouds. It proves valuable for architectural or design workflows and for conducting energy or quality system simulations.@en

Reconstruction of historic building elements is often necessary in adaptive re-use projects. Optimally this is performed with as much original material as can be salvaged. However, the use of hydraulic lime mortars with no cement content in reconstructed masonry can lead to long curing time and excessive deformation under mechanical loads. Therefore, local masonry reconstruction in adaptive re-use projects using historic materials that need to adhere to pressing construction schedules should always be closely monitored. The objective of the paper is to demonstrate the need for accurate geometric survey of vault structures in order to achieve accurate deformation results using numerical analysis. Focusing on a complex reconstruction project involving a masonry vault at the Royal Academy of Fine Arts in Ghent, practical aspects of damage monitoring, geometric survey and computational analysis of historic structures are jointly presented and addressed. The vault was dismantled and reassembled using the original bricks and a newly made hydraulic lime mortar, the latter of which was mechanically characterized. Existing cracks in the masonry walls supporting the vault were monitored for the detection of new damage. Detailed geometric surveys were carried out using terrestrial laser scanning at two points in time after the reconstruction of the vault: a) before the removal of the formwork and b) after the removal. These scans are able to not only register the geometry of the vault in great detail, but also to measure the deflection of the structure under its self-weight non-intrusively and with good accuracy. Structural analysis of the vault has been carried out employing two approaches: a) by using simple geometric models of the vault and b) by using the detailed laser scanning data. Major differences between the two approaches are obtained in terms calculated deflection, highlighting the importance of detailed geometric survey for the analysis of historic structures. Detailed geometric survey data is shown to be critical in achieving accurate analysis results in structures whose deformation behaviour is mainly governed by their geometry.

@en

Differential soil settlements can induce structural damage to heritage buildings, causing not only economic but also cultural value losses. In 1963, the Saint Jacob’s church in Leuven was permanently closed to the public because of severe settlement-induced damage caused by insufficient bearing capacity of the foundation. Currently, the church is stabilized using a temporary shoring system. This work aims at implementing a practical modelling approach to predict damage on church nave walls subjected to differential settlements. For that purpose, a finite element model of the Saint Jacob’s church nave was generated and validated through on-site monitoring data including levelling, damage survey and laser scanning. The model takes into account the non-linear behavior of the masonry by means of continuum smeared cracking. The paper introduces two approaches to model the settlement on the structure. One of them consists in the direct application of vertical displacements underneath the structure according to the deformation profile measured on-site. In the second approach, interfaces with different stiffness are placed at the base allowing the structure to deform under its self-weight. In addition, the effect of the settlement profile type in the damage level is analyzed.

@en