Recent observations of the trade-wind regions highlight the covariability between cold-pool properties and mesoscale cloud organization. Given the covariability of organization with cloud cover and albedo, this suggests a potential impact of cold pools on the cloud radiative effect (CRE). To explore this, we use an ensemble of 103 large-domain, high-resolution, large-eddy simulations and investigate how the variability in cold pools is determined by large-scale external cloud-controlling factors (CCFs) and shaped by processes within the mesoscale. It is demonstrated that the size and frequency of occurrence of cold pools are strongly influenced by the near-surface horizontal wind speed and large-scale subsidence. The temporal evolution of cold pools is strongly correlated with the diurnality in radiation. Even without external variability, we find a strong intermittent behaviour in the evolution of cold pools, governed by a complex interplay between cold pools and clouds which expresses itself in the form of shallow squall lines. These squall lines result from precipitating downdrafts, cold pool outflows and the resulting gust fronts, reinforcing parent clouds. Cold pools influence the CRE of trade cumuli, but only when they exist during the day. This emphasizes the importance of the synchronization between cold-pool events and the diurnal cycle of insolation for the dependence of the CRE on cold pools.@en

Open boundary conditions were developed for atmospheric large-eddy simulation (LES) models and implemented into the Dutch Atmospheric Large-Eddy Simulation model. The implementation was tested in a “Big Brother”-like setup, in which the simulation with open boundary conditions was forced by an identical control simulation with periodic boundary conditions. The results show that the open boundary implementation has minimal influence on the solution. Both the mean state and the turbulent structures are close to the control simulation, and disturbances at the in- and outflow boundaries are negligible. To emulate a setup in which the LES is coupled to a coarser model, the influence of coarse boundary input was tested by smoothing the output of the periodic control simulation both temporally and spatially before feeding it as input to the simulation with open boundary conditions. When smoothing is applied over larger spatial and longer temporal scales, disturbances start to form at the inflow boundary and an area exists where turbulence needs to develop. Adding synthetic turbulence to the smoothed input reduces the size of this area and the magnitude of the disturbances.@en

Recent observations of the trades highlight the covariability between cold pool (CP) properties and cloud cover, suggesting a potential impact of CPs on the cloud radiative effect (CRE). To explore this, we use an ensemble of 103 large-domain, high-resolution, large-eddy simulations (Cloud Botany). We investigate the extent to which the variability in CPs is driven by external conditions or convective self-organization. Our findings show that CPs are notably controlled by large-scale conditions, specifically (horizontal) wind speed and subsidence. The temporal evolution of CPs is tightly related to the diurnality in radiation. To understand the extent to which CPs vary with self-organization, we switch off the diurnality in radiation. Despite the absence of the diurnal cycle, CP time series still exhibit fluctuations. These fluctuations result from the recharge-discharge of thermodynamic and dynamic properties of the sub-cloud layer owing to CP-cloud interactions. Our results demonstrate that circulations induced by CPs reinforce the parent clouds, resulting in deepening and scale growth, followed by mesoscale arcs enclosing clear-sky areas. Finally, we show that CPs influence CRE, but only when they exist during the day. Our findings emphasize the importance of the relationship between the timescales of self-organization and the diurnal cycle of external conditions, greatly influencing the CRE dependency on self-organizing CPs.@en

Small shallow cumulus clouds (less-than 1 km) over the tropical oceans appear to possess the ability to self-organize into mesoscale (10–100 km) patterns. To better understand the processes leading to such self-organized convection, we present Cloud Botany, an ensemble of 103 large-eddy simulations on domains of 150 km, produced by the Dutch Atmospheric Large Eddy Simulation model on supercomputer Fugaku. Each simulation is run in an idealized, fixed, larger-scale environment, controlled by six free parameters. We vary these over characteristic ranges for the winter trades, including parameter combinations observed during the EUREC4A (Elucidating the role of clouds–circulation coupling in climate) field campaign. In contrast to simulation setups striving for maximum realism, Cloud Botany provides a platform for studying idealized, and therefore more clearly interpretable causal relationships between conditions in the larger-scale environment and patterns in mesoscale, self-organized shallow convection. We find that any simulation that supports cumulus clouds eventually develops mesoscale patterns in their cloud fields. We also find a rich variety in these patterns as our control parameters change, including cold pools lined by cloudy arcs, bands of cross-wind clouds and aggregated patches, sometimes topped by thin anvils. Many of these features are similar to cloud patterns found in nature. The published data set consists of raw simulation output on full 3D grids and 2D cross-sections, as well as post-processed quantities aggregated over the vertical (2D), horizontal (1D) and all spatial dimensions (time-series). The data set is directly accessible from Python through the use of the EUREC4A intake catalog.@en

A new generation of operational atmospheric models operating at horizontal resolutions in the range 200 m up to ~ 2 km is becoming increasingly popular for operational use in numerical weather prediction and climate applications. Such grid spacings are becoming sufficiently fine to resolve a fraction of the turbulent transports. Here we analyze LES results of a convective boundary layer obtained by coarsening horizontal grid spacings up to 800 m. The aim is to explore the dependency of the mean state and turbulent fluxes on the grid resolution. Both isotropic and anisotropic eddy diffusion approaches are evaluated, where in the latter case the horizontal and vertical eddy diffusivities differ in accord with their horizontal and vertical grid spacings. For coarsening horizontal grid sizes entrainment at the top of the boundary layer tends to get slightly enhanced for isotropic diffusion. An analysis of the energy spectrum shows that anisotropic diffusion causes relatively more dissipation of variance at smaller length scales. This leads, in turn, to a shift of spectral energy towards larger length scales. This can also be clearly seen from the different kinds of spatial organization. The present study therefore suggests that details with regards to the representation of processes at small scales might impact the organization at length scales much larger than the smallest scales that can be resolved by the model.@en

A new generation of operational atmospheric models operating at horizontal resolutions in the range 200 m ∼ 2 km is becoming increasingly popular for operational use in numerical weather prediction and climate applications. Such grid spacings are becoming sufficiently fine to resolve a fraction of the turbulent transports. Here we analyze Large-eddy simulation results of a convective boundary layer obtained by coarsening horizontal grid spacings up to 800 m. The aim is to explore the dependency of the mean state and turbulent fluxes on the grid resolution. Both isotropic and anisotropic eddy diffusion approaches are evaluated, where in the latter case the horizontal and vertical eddy diffusivities differ in accord with their horizontal and vertical grid spacings. For coarsening horizontal grid sizes entrainment at the top of the boundary layer tends to get slightly enhanced for isotropic diffusion, whereas for the anisotropic diffusion approach the vertically well-mixed boundary-layer structure becomes severely degraded. An analysis of the energy spectrum shows that anisotropic diffusion causes relatively more dissipation of variance at smaller length scales. This leads, in turn, to a shift of spectral energy toward larger length scales that also becomes apparent from a rather different kind of spatial organization of convection. The present study therefore suggests that details with regards to the representation of processes at small scales might impact the organization at length scales much larger than the smallest scales that can be resolved by the model.@en

HPCI User Report for the project Organization of shallow cumulus clouds on the Fugaku supercomputer.@en

In atmospheric modeling, superparameterization (SP) has gained popularity as a technique to improve cloud and convection representations in large-scale models by coupling them locally to cloud-resolving models. We show how the different representations of cloud water in the local and the global models in SP lead to a suppression of cloud advection and ultimately to a systematic underrepresentation of the cloud amount in the large-scale model. We demonstrate this phenomenon in a regional SP experiment with the global model OpenIFS coupled to the local model Dutch Atmospheric Large Eddy Simulation, as well as in an idealized setup, where the large-scale model is replaced by a simple advection scheme. As a starting point for mitigating the problem of suppressed cloud advection, we propose a scheme where the spatial variability of the local model's total water content is enhanced in order to match the global model's cloud condensate amount. The proposed scheme enhances the cloud condensate amount in the test cases, however a large discrepancy remains, caused by rapid dissipation of the clouds added by the proposed scheme.@en

In this study, we investigate uncertainties in a large eddy simulation of the atmosphere, employing modern uncertainty quantification methods that have hardly been used yet in this context. When analysing the uncertainty of model results, one can distinguish between uncertainty related to physical parameters whose values are not exactly known, and uncertainty related to modelling choices such as the selection of numerical discretization methods, of the spatial domain size and resolution, and the use of different model formulations. While the former kind is commonly studied e.g. with forward uncertainty propagation, we explore the use of such techniques to also assess the latter kind. From a climate modelling perspective, uncertainties in the convective response and cloud formation are of particular interest, since these affect the cloud-climate feedback, one of the dominant sources of uncertainty in current climate models. Therefore we analyse the DALES model in the RICO case, a well-studied convection benchmark. We use the VECMA toolkit for uncertainty propagation, assessing uncertainties stemming from physical parameters as well as from modelling choices. We find substantial uncertainties due to small random initial state perturbations, and that the choice of advection scheme is the most influential of the modelling choices we assessed. This article is part of the theme issue 'Reliability and reproducibility in computational science: implementing verification, validation and uncertainty quantification in silico'.

@en

We present the VECMA toolkit (VECMAtk), a flexible software environment for single and multiscale simulations that introduces directly applicable and reusable procedures for verification, validation (V&V), sensitivity analysis (SA) and uncertainty quantication (UQ). It enables users to verify key aspects of their applications, systematically compare and validate the simulation outputs against observational or benchmark data, and run simulations conveniently on any platform from the desktop to current multi-petascale computers. In this sequel to our paper on VECMAtk which we presented last year [1] we focus on a range of functional and performance improvements that we have introduced, cover newly introduced components, and applications examples from seven different domains such as conflict modelling and environmental sciences. We also present several implemented patterns for UQ/SA and V&V, and guide the reader through one example concerning COVID-19 modelling in detail. This article is part of the theme issue 'Reliability and reproducibility in computational science: implementing verification, validation and uncertainty quantification in silico'.

@en

In order to eliminate climate uncertainty w.r.t. cloud and convection parametrizations, superpramaterization (SP) [1] has emerged as one of the possible ways forward. We have implemented (regional) superparametrization of the ECMWF weather model OpenIFS [2] by cloud-resolving, three-dimensional large-eddy simulations. This setup, described in [3], contains a two-way coupling between a global meteorological model that resolves large-scale dynamics, with many local instances of the Dutch Atmospheric Large Eddy Simulation (DALES) [4], resolving cloud and boundary layer physics. The model is currently prohibitively expensive to run over climate or even seasonal time scales, and a global SP requires the allocation of millions of cores. In this paper, we study the performance and scaling behavior of the LES models and the coupling code and present our implemented optimizations. We mimic the observed load imbalance with a simple performance model and present strategies to improve hardware utilization in order to assess the feasibility of a world-covering superparametrization. We conclude that (quasi-)dynamical load-balancing can significantly reduce the runtime for such large-scale systems with wide variability in LES time-stepping speeds.

@en

The need for open science has been recognized by the communities of meteorology and climate science. While these domains are mature in terms of applying digital technologies, the implementation of open science methodologies is less advanced. In a session on "Weather and Climate Science in the Digital Era"at the 14th IEEE International eScience Conference domain specialists and data and computer scientists discussed the road towards open weather and climate science. Roughly 80ĝ€¯% of the studies presented in the conference session showed the added value of open data and software. These studies included open datasets from disparate sources in their analyses or developed tools and approaches that were made openly available to the research community. Furthermore, shared software is a prerequisite for the studies which presented systems like a model coupling framework or digital collaboration platform. Although these studies showed that sharing code and data is important, the consensus among the participants was that this is not sufficient to achieve open weather and climate science and that there are important issues to address. At the level of technology, the application of the findable, accessible, interoperable, and reusable (FAIR) principles to many datasets used in weather and climate science remains a challenge. This may be due to scalability (in the case of high-resolution climate model data, for example), legal barriers such as those encountered in using weather forecast data, or issues with heterogeneity (for example, when trying to make use of citizen data). In addition, the complexity of current software platforms often limits collaboration between researchers and the optimal use of open science tools and methods. The main challenges we observed, however, were non-technical and impact the practice of science as a whole. There is a need for new roles and responsibilities in the scientific process. People working at the interface of science and digital technology - e.g., data stewards and research software engineers - should collaborate with domain researchers to ensure the optimal use of open science tools and methods. In order to remove legal boundaries on sharing data, non-academic parties such as meteorological institutes should be allowed to act as trusted agents. Besides the creation of these new roles, novel policies regarding open weather and climate science should be developed in an inclusive way in order to engage all stakeholders. Although there is an ongoing debate on open science in the community, the individual aspects are usually discussed in isolation. Our approach in this paper takes the discourse further by focusing on "open science in weather and climate research"as a whole. We consider all aspects of open science and discuss the challenges and opportunities of recent open science developments in data, software, and hardware. We have compiled these into a list of concrete recommendations that could bring us closer to open weather and climate science. We acknowledge that the development of open weather and climate science requires effort to change, but the benefits are large. We have observed these benefits directly in the studies presented in the conference and believe that it leads to much faster progress in understanding our complex world.

@en

We present a Python interface for the Dutch Atmospheric Large Eddy Simulation (DALES), an existing Fortran code for high-resolution, turbulence-resolving simulation of atmospheric physics. The interface is based on an infrastructure for remote and parallel function calls and makes it possible to use and control the DALES weather simulations from a Python context. The interface is designed within the OMUSE framework, and allows the user to set up and control the simulation, apply perturbations and forcings, collect and analyse data in real time without exposing the user to the details of setting up and running the parallel Fortran DALES code. Another significant possibility is coupling the DALES simulation to other models, for example larger scale numerical weather prediction (NWP) models that can supply realistic lateral boundary conditions. Finally, the Python interface to DALES can serve as an educational tool for exploring weather dynamics, which we demonstrate with an example Jupyter notebook.

@en

The Radiative-Convective Equilibrium Model Intercomparison Project (RCEMIP) is an intercomparison of multiple types of numerical models configured in radiative-convective equilibrium (RCE). RCE is an idealization of the tropical atmosphere that has long been used to study basic questions in climate science. Here, we employ RCE to investigate the role that clouds and convective activity play in determining cloud feedbacks, climate sensitivity, the state of convective aggregation, and the equilibrium climate. RCEMIP is unique among intercomparisons in its inclusion of a wide range of model types, including atmospheric general circulation models (GCMs), single column models (SCMs), cloud-resolving models (CRMs), large eddy simulations (LES), and global cloud-resolving models (GCRMs). The first results are presented from the RCEMIP ensemble of more than 30 models. While there are large differences across the RCEMIP ensemble in the representation of mean profiles of temperature, humidity, and cloudiness, in a majority of models anvil clouds rise, warm, and decrease in area coverage in response to an increase in sea surface temperature (SST). Nearly all models exhibit self-aggregation in large domains and agree that self-aggregation acts to dry and warm the troposphere, reduce high cloudiness, and increase cooling to space. The degree of self-aggregation exhibits no clear tendency with warming. There is a wide range of climate sensitivities, but models with parameterized convection tend to have lower climate sensitivities than models with explicit convection. In models with parameterized convection, aggregated simulations have lower climate sensitivities than unaggregated simulations.@en

As a computationally attractive alternative for global large eddy simulations (LESs), we investigate the possibility of using comprehensive three-dimensional LESs as a superparameterization that can replace all traditional parameterizations of atmospheric processes that are currently used in global models. We present the technical design for a replacement of the parameterization for clouds, convection, and turbulence of the global atmospheric model of the European Centre for Medium-Range Weather Forecasts by the Dutch Atmospheric Large Eddy Simulation model. The model coupling consists of bidirectional data exchange between the global model and the high-resolution LES models embedded within the columns of the global model. Our setup allows for selective superparameterization, that is, for applying superparameterization in local regions selected by the user, while keeping the standard parameterization of the global model intact outside this region. Computationally, this setup can result in major geographic load imbalance, because of the large difference in computational load between superparameterized and nonsuperparameterized model columns. To resolve this issue, we use a modular design where the local and global models are kept as distinct model codes and organize the model coupling such that all the local models run in parallel, separate from the global model. First simulation results, employing this design, demonstrate the potential of our approach.

@en

Here, we describe our efforts to create a multi-scale and multi-physics framework that can be retargeted across different disciplines. Currently we have implemented our approach in the astrophysical domain, for which we developed AMUSE (github.com/amusecode/amuse ), and generalized this to the oceanographic and climate sciences, which led to the development of OMUSE (bitbucket.org/omuse ). The objective of this paper is to document the design choices that led to the successful implementation of these frameworks as well as the future challenges in applying this approach to other domains.@en

Morphogenesis allows millions of cells to self-organize into intricate structures with a wide variety of functional shapes during embryonic development. This process emerges from local interactions of cells under the control of gene circuits that are identical in every cell, robust to intrinsic noise, and adaptable to changing environments. Constructing human technology with these properties presents an important opportunity in swarm robotic applications ranging from construction to exploration. Morphogenesis in nature may use two different approaches: hierarchical, top-down control or spontaneously self-organizing dynamics such as reaction-diffusion Turing patterns. Here, we provide a demonstration of purely self-organizing behaviors to create emergent morphologies in large swarms of real robots. The robots achieve this collective organization without any self-localization and instead rely entirely on local interactions with neighbors. Results show swarms of 300 robots that self-construct organic and adaptable shapes that are robust to damage. This is a step toward the emergence of functional shape formation in robot swarms following principles of self-organized morphogenetic engineering.

@en