Conventional Deep Learning (DL) methods for bearing health indicator (HI) adopt supervised approaches, requiring expert knowledge of the component degradation trend. Since bearings experience various failure modes, assuming a particular degradation trend for HI is suboptimal. Unsupervised DL methods are scarce in this domain. They generally maximise the HI monotonicity built in the middle layer of an Autoencoder (AE) trained to reconstruct the run-to-failure signals. The backpropagation (BP) training algorithm is unable to perform this maximisation since the monotonicity of HI subsections corresponding to input sample batches does not guarantee the monotonicity of the whole HI. Therefore, existing methods achieve this by searching AE hyperparameters so that its BP training to minimise the reconstruction error also leads to a highly monotonic HI in its middle layer. This is done using expensive search algorithms where the AE is trained numerous times using various hyperparameter settings, rendering them impractical for large datasets. To address this limitation, a small Convolutional Autoencoder (CAE) architecture and a hybrid training algorithm combining Particle Swarm Optimisation and BP are proposed in this work to enable simultaneous maximisation of the HI monotonicity and minimisation of the reconstruction error. As a result, the HI is built by training the CAE only once. The results from three case studies demonstrate this method’s lower computational burden compared to other unsupervised DL methods. Furthermore, the CAE-based HIs outperform the indicators built by equivalent and significantly larger models trained with a BP-based supervised approach, leading to 85% lower remaining useful life prediction errors.@en

State-of-the-art Deep Learning (DL) methods based on Supervisory Control and Data Acquisition (SCADA) system data for the detection and prognosis of wind turbine faults require large amounts of failure data for successful training and generalisation, which are generally not available. This limitation prevents benefiting from the superior performance of these methods, especially in SCADA-based failure prognosis. Data augmentation approaches have been proposed in the literature for generating failure data instances within a SCADA sequence to reduce the imbalance between healthy and faulty state data points, which is relevant to fault detection tasks. However, the successful implementation of DL-based failure prognosis methods requires the availability of multiple run-to-failure SCADA sequences. This paper proposes a data-driven method for generating synthetic run-to-failure SCADA sequences with custom operational and environmental conditions and progression of degradation. An Artificial Neural Network (ANN) is trained with signals that represent these factors to reconstruct the SCADA signals. Then, it is used to generate synthetic SCADA datasets based on data available from a wind turbine that experienced a gearbox failure. Synthetic data sets generated are evaluated on the basis of the similarity of their signal distributions, the temporal dynamics within each signal, and the temporal dynamics among different SCADA signals with those in similar field datasets. The results show that the generated synthetic datasets are consistent with their field counterparts, with a comparatively lower diversity in their dynamic behaviour in time.

@en

Effective and timely health monitoring of wind turbine gearboxes and generators is essential to reduce the costs of operations and maintenance activities, especially offshore. This paper presents a scalable and lightweight convolutional neural network (CNN) framework using high-dimensional raw condition monitoring data for the automatic detection of multiple wind turbine electromechanical faults. The proposed approach leverages the potential of combining information from a variety of signals to learn features and to discriminate the types of fault and their severity. As a result of the CNN layers used to extract features from the signals, this architecture works in the time domain and can digest high-resolution multi-sensor data streams in real-time. To overcome the inherent black-box nature of AI models, this research proposes two interpretability techniques, multidimensional scaling and layer-wise relevance propagation, to analyse the proposed model's inner-working and identify the signal features relevant for fault classification. Experimental results show high performance and classification accuracies above 99.9% for all fault cases tested, demonstrating the efficacy of the proposed fault-detection system.

@en

Digitalisation is one of the key drivers for reducing the costs and risks of wind energy. When considering whether to embark on a digitalisation initiative, two key questions arise. The first is what business or operational opportunities might feasibly be addressed and the second is which of the many potential aspects of digitalisation are relevant to those opportunities. In this work, we show how these questions can be answered with a use-case-driven approach, based around a survey aiming to collect and collate the main”pain points” (or everyday challenges) of people in the wind energy sector. Although the relatively low number of participants of the survey (46) means that the results should only be used indicatively, it is still possible to make some general recommendations for priorities for digitalisation efforts in the wind energy sector. Firstly, digitalisation efforts should focus both on supporting people carrying out cross-lifecycle tasks, in particular sharing data, managing data, undertaking general data analyses and accessing data. Tools to do this should deal with varying data formats and naming conventions, make metadata more accessible, define data and metadata standards, make more data publicly available and improve the quality of data. Secondly, efforts should also focus on supporting people in the wind farm operational phase, in particular with failure detection, fault diagnosis, failure rate modelling and predictive maintenance. Solutions to do this should focus on accessible and validated tools for fault detection, cloud or other data pipeline solutions for SCADA data and tools for exhaustive data documentation. Finally, digitalisation efforts should focus on better communicating and helping people become aware of existing solutions and tools, as well as on helping people to exert a stronger influence on possible solutions.

@en

Wind turbine technologies are evolving rapidly in terms of complexity and size and there is an urgent need for cost-effective Operations and Maintenance (O&M) strategies to increase the profitability of wind power assets.

Component reliability as well as maintenance strategies have the greatest effect on O&M planning and costs, especially in offshore applications.

This Chapter provides an overview of the state of the art in the field of wind turbine and wind farm reliability and maintenance, discussing the main points, lessons and opportunities learnt from both industry and academic experience.@en

This paper presents a novel prognostic method to estimate the remaining useful life (RUL) of generators using the SCADA (Supervisory Control And Data Acquisition) systems installed in wind turbines. A data-driven wind turbine anomaly classification method is developed. The anomalies are quantified into a health indicator to measure the component degradation over time. An Autoregressive Integrated Moving Average (ARIMA) time series forecasting technique is then applied to predict the RUL of the wind turbine generator. The proposed method has been validated using industry field data showing accurate predictions of RUL with a 21 day lead time for maintenance of the turbine.@en

Condition-based maintenance using routinely collected Supervisory Control and Data Acquisition (SCADA) data is a promising strategy to reduce downtime and costs associated with wind farm operations and maintenance. New approaches are continuously being developed to improve the condition monitoring for wind turbines. Development of normal behaviour models is a popular approach in studies using SCADA data. This paper first presents a data-driven framework to apply normal behaviour models using an artificial neural network approach for wind turbine gearbox prognostics. A one-class support vector machine classifier, combining different error parameters, is used to analyse the normal behaviour model error to develop a robust threshold to distinguish anomalous wind turbine operation. A detailed sensitivity study is then conducted to evaluate the potential of using high-frequency SCADA data for wind turbine gearbox prognostics. The results based on operational data from one wind turbine show that, compared to the conventionally used 10-min averaged SCADA data, the use of high-frequency data is valuable as it leads to improved prognostic predictions. High-frequency data provides more insights into the dynamics of the condition of the wind turbine components and can aid in earlier detection of faults.@en

Current climate change concerns accelerate interest in developing reliable renewable energy sources. Two of the most significant, in the wind and sea, are subject to turbulence, where its mathematics are at the forefront and the topic of this Conference.@en

In-service turbine monitoring is essential for maximizing the wind energy contribution to the global energy budget. Measurement of turbine shaft torque under transient wind conditions is fundamental to develop reliable condition monitoring techniques. Contact based measurements bring their own disadvantages and non-contactless measurements have many potential advantages. However, their performance needs to be validated against standard methods. This paper focuses on the development of an enhanced transient Feature Selective Validation (FSV) techniques to undertake this analysis with an emphasis on transient data processing. The nature of FSV makes it a natural technique to consider for this problem space. Open questions have existed as to how transients should be dealt with in FSV. This paper overcomes the limitations of previous approaches for step-function transient comparison and presents analytical methods to ensure the transient feature itself is considered, irrespective of how much pre- and post- transient data happens to be included.

@en

This paper presents a simplified automated fault detection scheme for wind turbine induction generators with rotor electrical asymmetries. Fault indicators developed in previous works have made use of the presence of significant spectral peaks in the upper sidebands of the supply frequency harmonics; however, the specific location of these peaks may shift depending on the wind turbine speed. As wind turbines tend to operate under variable speed conditions, it may be difficult to predict where these fault-related peaks will occur. To accommodate for variable speeds and resulting shifting frequency peak locations, previous works have introduced methods to identify or track the relevant frequencies, which necessitates an additional set of processing algorithms to locate these fault-related peaks prior to any fault analysis. In this work, a simplified method is proposed to instead bypass the issue of variable speed (and shifting frequency peaks) by introducing a set of bandpass filters that encompass the ranges in which the peaks are expected to occur. These filters are designed to capture the fault-related spectral information to train a classifier for automatic fault detection, regardless of the specific location of the peaks. Initial experimental results show that this approach is robust against variable speeds and further shows good generalizability in being able to detect faults at speeds and conditions that were not presented during training. After training and tuning the proposed fault detection system, the system was tested on “unseen” data and yielded a high classification accuracy of 97.4%, demonstrating the efficacy of the proposed approach.

@en

In MW-sized wind turbines, the most widely-used generator is the wound rotor induction machine, with a partially-rated voltage source converter connected to the rotor. This generator is a significant cause of wind turbine fault modes. In this paper, a harmonic time-stepped generator model is applied to derive wound rotor induction generator electrical & mechanical signals for fault measurement, and propose simple closed-form analytical expressions to describe them. Predictions are then validated with tests on a 30 kW induction generator test rig. Results show that generator rotor unbalance produces substantial increases in the side-bands of supply frequency and slotting harmonic frequencies in the spectra of current, power, speed, mechanical torque and vibration measurements. It is believed that this is the first occasion in which such comprehensive approach has been presented for this type of machine, with healthy & faulty conditions at varying loads and rotor faults. Clear recommendations of the relative merits of various electrical & mechanical signals for detecting rotor faults are given, and reliable fault indicators are identified for incorporation into wind turbine condition monitoring systems. Finally, the paper proposes that fault detectability and reliability could be improved by data fusion of some of these electrical & mechanical signals.

@en

Non-intrusive, reliable and precise torque measurement is critical to dynamic performance monitoring, control and condition monitoring of rotating mechanical systems. This paper presents a novel, contactless torque measurement system consisting of two shaft-mounted zebra tapes and two optical sensors mounted on stationary rigid supports. Unlike conventional torque measurement methods, the proposed system does not require costly embedded sensors or shaft-mounted electronics. Moreover, its non-intrusive nature, adaptable design, simple installation and low cost make it suitable for a large variety of advanced engineering applications. Torque measurement is achieved by estimating the shaft twist angle through analysis of zebra tape pulse train time shifts. This paper presents and compares two signal processing methods for torque measurement: rising edge detection and cross-correlation. The performance of the proposed system has been proven experimentally under both static and variable conditions and both processing approaches show good agreement with reference measurements from an in-line, invasive torque transducer. Measurement uncertainty has been estimated according to the ISO GUM (Guide to the expression of uncertainty in measurement). Type A analysis of experimental data has provided an expanded uncertainty relative to the system full-scale torque of ±0.30% and ±0.86% for the rising edge and cross-correlation approaches, respectively. Statistical simulations performed by the Monte Carlo method have provided, in the worst case, an expanded uncertainty of ±1.19%.

@en