Lumbar joint compression forces have been linked to the development of chronic low back pain, which is specially present in occupational environments. Offline methodologies for lumbosacral joint compression force estimation are not commonly integrated in occupational or medical applications due to the highly time-consuming and complex post-processing procedures. Hence, applications such as real-time adjustment of assistive devices (i.e., back-support exoskeletons) for optimal modulation of compression forces remains unfeasible. Here, we present a real-time electromyography (EMG)-driven musculoskeletal model, capable of estimating accurate lumbosacral joint moments and plausible compression forces. Ten participants performed box-lifting tasks (5 and 15 kg) with and without the Laevo Flex back-support exoskeleton using squat and stoop lifting techniques. Lumbosacral kinematics and EMGs from abdominal and thoracolumbar muscles were used to drive, in real-time, subject-specific EMG-driven models, and estimate lumbosacral joint moments and compression forces. Real-time EMG-model derived moments showed high correlations (R² = 0.76 - 0.83) and estimation errors below 30% with respect to reference inverse dynamic moments. Compared to unassisted lifting conditions, exoskeleton liftings showed mean lumbosacral joint moments and compression forces reductions of 11.9 - 18.7 Nm (6 - 12% of peak moment) and 300 - 450 N (5 - 10%), respectively. Our modelling framework was capable of estimating in real-time, valid lumbosacral joint moments and compression forces in line with in vivo experimental data, as well as detecting the biomechanical effects of a passive back-support exoskeleton. Our presented technology may lead to a new class of bio-protective robots in which personalized assistance profiles are provided based on subject-specific musculoskeletal variables.

An important goal in the design of next-generation exoskeletons and limb prostheses is to replicate human limb dynamics. Joint impedance determines the dynamic relation between joint displacement and torque. Joint stiffness is the position-dependent component of joint impedance and is key in postural control and movement. However, the mechanisms to modulate joint stiffness are not fully understood yet. The goal of this study is to conduct a systematic analysis on how humans modulate ankle stiffness. Time-varying stiffness was estimated for six healthy subjects under isometric, as well as quick and slow dynamic conditions via system identification techniques; specifically, an ensemble-based algorithm using short segments of ankle torque and position recordings. Our results show that stiffness had the lowest magnitude under quick dynamic conditions. Under isometric conditions, with fixed position and varying muscle activity, stiffness exhibited a higher magnitude. Finally, under slow dynamic conditions, stiffness was found to be the highest. Our results highlight, for the first time, the variability in stiffness modulation strategies across conditions, especially across movement velocity.

Joint stiffness estimation under dynamic conditions still remains a challenge. Current stiffness estimation methods often rely on the external perturbation of the joint. In this study, a novel 'perturbation-free' stiffness estimation method via electromyography (EMG)-driven musculoskeletal modeling was validated for the first time against system identification techniques. EMG signals, motion capture, and dynamic data of the ankle joint were collected in an experimental setup to study the ankle joint stiffness in a controlled way, i.e. at a movement frequency of 0.6 Hz as well as in the presence and absence of external perturbations. The model-based joint stiffness estimates were comparable to system identification techniques. The ability to estimate joint stiffness at any instant of time, with no need to apply joint perturbations, might help to fill the gap of knowledge between the neural and the muscular systems and enable the subsequent development of tailored neurorehabilitation therapies and biomimetic prostheses and orthoses.