Circular Image

J. Bouwmeester

info

Please Note

38 records found

Intersatellite optical communication links are strongly affected by transmitter pointing jitter, which stochastically modulates the received optical power and degrades communication performance. While adjusting the divergence of a conventional Gaussian beams can partially mitigate this effect, the optimum far-field irradiance distribution for maximizing link performance has not been formally derived. In this work, we introduce a variational formalism to determine the optimum far-field irradiance for an intersatellite link affected by pointing jitter. The flat-top beam is found to be the optimum beam shape for minimizing outage probability. In particular, it requires of the power needed by a conventional Gaussian beam to achieve the same outage probability. However, the flat-top profile is discontinuous and physically unrealizable. To address this, we analyze a continuous family of super-Gaussian beam shapes that approximate the flat-top as the order increases. In addition, several coherent and incoherent beam shaping techniques are evaluated to assess their ability to reproduce the optimum irradiance distribution. The results show that these techniques can reduce the required transmitted power by up to
compared with conventional Gaussian beams. ...
Conference paper (2026) - A. Mazzoli, A. Besse, J. Bouwmeester, I. Khan, Jérôme Loicq, P. Piron, R. Saathof, I. Sigusch, G. Terrasa, More Authors
The optical design layout of a single-spacecraft nulling interferometer is presented here as part of an ESA-initiated study to explore the design parameters and performance of an interferometric concept based on a single spacecraft with multiple
sub-apertures. Launch constraints drive the ray-traced model to cover the entire optical chain, from the telescope entrance to the null output after the recombination scheme. A trade-off among several telescope architectures led to the choice of a compact two-mirror solution consisting of four 2.5m diameter telescopes arranged in a linear configuration with an extended baseline. Optical performance at the null output is evaluated, confirming compatibility with starlight suppression
targets and establishing the key figures of merit for the interferometer. This work presents the first integrated optical design of the mission concept, laying the groundwork for future iterations that include mechanical, thermal, and control aspects. ...
Conference paper (2026) - G. Terrasa, J. Bouwmeester, F.D. Wilting, A. Besse, Jérôme Loicq, I. Khan, R. Saathof, I. Sigusch, P. Piron, More Authors
The mechanical and thermal design of a single spacecraft nulling interferometer is presented as part of a new study initiated by the European Space Agency to explore the design parameters and performance of an interferometric concept
based on a single spacecraft with multiple sub-apertures. Launch constraints impose strict mass and volume limitations and necessitate secondary mirror deployment. Deployment concepts were evaluated through comparison and modal
analysis. Due to thermal considerations, a preliminary thermal model was also developed. Results emphasize the necessity for a multi-layer sunshield and highly reflective materials to achieve the required temperature range.
Temperature gradients across the payload and their effects on deformations have been identified as key factors for future investigation. This study provides the first integrated thermo-mechanical concept for the interferometer, laying the
groundwork for further analysis and trade-off studies in later phases. ...
Conference paper (2026) - A. Besse, I. Khan, A. Mazzoli, J. Bouwmeester, P. Piron, R. Saathof, I. Sigusch, N. Bhattacharya, Jérôme Loicq, More Authors
One of the objectives of modern astronomy is the characterization of terrestrial exoplanets orbiting Sun-like stars in the mid-infrared, where instruments face requirements that can only be overcome by nulling interferometry. Particularly, optical effects such as polarization aberrations require careful attention for they deteriorate the null depth. Using the optical design of the Exoplanet Explorer concept study, we simulate the influence of polarization aberrations over the 3–20μm band, analyze their impact on the null depth and propose multiple compensation strategies for polarization aberrations. Furthermore, we present our nulling interferometry test bench, where we will experimentally investigate polarization aberrations in the beam combiner and phase shifter to provide more insights into the required polarization errors. These results will be used to implement polarization control subsystems in our 4-beams broadband nulling interferometry test bench CAPIBARA (Combining 4 APertures for mid-Infrared Broadband Analysis of Rocky-exoplanets Atmospheres). ...
Free-space optical communications (FSOC) are a key enabling technology for future high-capacity space-based networks. Particularly, the backbone of global communication relies on intersatellite optical links. In a previous study [Opt. Express 32, 31597 (2024)], the authors proposed a method to mitigate the impact of transmitter pointing jitter by using a superposition of orthogonally polarized Gaussian and higher-order Laguerre-Gaussian (LG) beams. In this study, we experimentally characterize the proposed system using a spiral phase plate (SPP) to generate higher-order annular beams. We demonstrate that such superpositions can be reliably generated in a realistic optical setup, quantify the associated beam-shaping errors and losses, and assess their impact on intersatellite optical communication performance. It is found that the proposed beam-shaping approach can still yield power savings on the order of 20% compared to a conventional Gaussian beam under the considered conditions. ...

A low-cost long fixed-baseline radar altimeter solution based on cubesats on-orbit assembly

Journal article (2025) - Jian Guo, Peter Hoogeboom, Paco Lopez Dekker, Jasper Bouwmeester, Gabriele Meoni, Jose Nieto, Juan Fayos, Eric Bertels, Camille Pirat
Radar interferometry can be used to obtain sub-kilometre resolution over a swath at the expense of additional transmit power and a sufficiently long baseline to accommodate at least two antennas. This paper reports an innovative concept called AltiCube+, a low-cost long fixed-baseline interferometric radar altimeter based on CubeSats on-orbit assembly. The AltiCube+ concept consists of multiple 16U CubeSats. After an early operation and commissioning phase, these CubeSats will perform autonomous rendezvous and docking with each other via deployable booms to establish a long fixed-baseline, and then deploy antennas for an interferometric altimeter configuration. The uniqueness of AltiCube+ is on the potential scientific opportunities brought by two left and right looking interferometric altimeters with around 6 m baseline (total system length is more than 8 m) and the sustainability due to its significantly low cost and short development lifecycle. If budget allows, multiple AltiCube+ systems with same or different altimetry capabilities can form a constellation to dramatically reduce the revisit time and, therefore, provide much better spatiotemporal coverage. ...
Conference paper (2025) - Jérôme Loicq, Denis Defrère, Romain Laugier, R. Saathof, J. Bouwmeester, P. Piron, Colin Dandumont, Vincent Moreau, Benoit Borguet, More authors...
One of the most ambitious goals of modern astronomy is to uncover signs of extraterrestrial biological activity, primarily achieved through spectroscopic analysis of light emitted by exoplanets to identify specific atmospheric molecules. Most exoplanets are indirectly identified through techniques like transit or Doppler shift of the host star's flux. Long-term surveys have yielded statistical insights into the occurrence rates of different planet types based on factors such as radius/mass, orbital period, and the spectral type of the host star, initial estimates of terrestrial planets within the habitable zone have also emerged. However, the difficulty of detecting light from these exoplanets leaves much unknown about their nature, formation, and evolution. As the number of rocky exoplanets around nearby stars rises, questions about their atmospheric composition, evolutionary trajectory, and habitability increase. Direct measurement of an cxoplanct's atmospheric composition through its spectral signature in the infrared can provide answers. Measuring the infrared spectrum of these planets poses significant challenges due to the star/planet contrast and very small angular separation from their host stars. Previous research showed that space-based telescopes are mandatory, and unless large primary mirrors (>30m in diameter) can be sent into space, intcrfcrometric techniques become essential. Combining light from distant telescopes with interferometric techniques allows access to information at minimal angular separation, operating within the diffraction limit of individual telescopes. Successful demonstrations of on-ground nulling interferometry open a new era for such space-based missions. They are vital to sidestep and tackle these scientific questions. We recently initiated a new study with the European Space Agency to explore the design parameters and the performances related to an interferometric concept based on a single spacecraft and sparse multiple sub-apertures. Launch constraints are linked to the use of an Ariane 6 launch vehicle. Our parametric study covers a range of 1-4 m for the diameter of the telescope and a 10-60 m baseline. The most promising concept working in the infrared range (3-20μm) will be highlighted. This study is conducted by TUDelft in cooperation with KULeuven, CSL/ULiege, and Amos with the support of the European Space Agency. ...
Intersatellite free-space optical communications are the backbone of the future highspeed global communication networks. In orbit, thermo-mechanical loads create perturbations that detriment the performance of these links. Among these perturbations, the transmitter pointing jitter and optical aberrations are of special relevance. We present an analysis of the coupled effects of transmitter pointing jitter and optical aberrations on intersatellite free space optical communications. A mathematical model is presented to evaluate the performance of average bit error probability, probability of outage, and reliability on intersatellite free space optical communication links subjected to these perturbations. Furthermore, the optimum non-aberrated truncated Gaussian beams are obtained for each of these performance parameters for different telescope architectures. The results demonstrate that the performance parameters are highly sensitive to the optimal far-field irradiances. These optimum operation points are then perturbed by Seidel aberrations to study the effect of these aberrations in the system. The results show that optical communication terminals are most sensitive to coma aberrations, mainly due to the induced apparent angle of arrival on the beacon beam. Finally, Monte Carlo simulations of combinations of Seidel aberrations show a strong dependency on the telescope architecture of the sensitivity of the communication performance parameter to the magnitude of the optical aberrations. ...
Mctamatcrials and mctasurfaccs hold significant promise for space applications due to their compactness and lightweight characteristics. These devices use nanostructures embedded in their flat surfaces to manipulate the electromagnetic field for various purposes. Among their potential applications, metalenses stand out for their prospective role in the next generation of optical instruments deployed in space. Specifically, they offer considerable advantages for free space optical and quantum communications terminals. In intersatellite free space optical communication links, transmitter pointing errors degrade the performance of the link. Nevertheless, optimizing the shape of the transmitted beam through a metalens can improve the communication link performance. In this study, we delve into the application of metalenses for shaping laser beams in intersatellite optical communication scenarios. We present the preliminary design of the metalens and analyze its performance through numerical simulations, analyzing its feasibility and potential in space-based optical communications. ...
This paper proposes a novel approach to improve the performance of free-space optical communication intersatellite links by combining fundamental Gaussian and higher-order Laguerre-Gaussian beams. We present a comprehensive mathematical model to analyze the system’s performance, including received power statistics, average bit error probability, and outage probability. To generate the desired beam profiles, we propose an optical system capable of creating a superposition of orthogonally polarized Laguerre-Gaussian beams that yield the far-field irradiance distributions that optimize the communication performance. Our theoretical analysis demonstrates that the combination of fundamental Gaussian and higher-order modes can significantly enhance system performance compared to conventional fundamental Gaussian beams. In some scenarios, the proposed approach offers savings on the order of 20% to 40% of the required transmitted power. ...

A Low-Cost Long Fixed-Baseline Radar Altimeter Solution Based On CubeSats On-Orbit Assembly

Conference paper (2024) - Jian Guo, Peter Hoogeboom, Paco L. Dekker, Jasper Bouwmeester, Gabriele Meoni, Jose Nieto, Juan Fayos, Eric Bertels, Camille Pirat
Radar interferoinetry can be used to obtain sub-kilometer resolution over a swath at the expense of additional transmit power and a sufficiently long baseline to accommodate at least two antennas. This paper reports an innovative concept called AltiCube+, a low-cost long fixed-baseline interferometric radar altimeter based on CubeSats on-orbit assembly. The AltiCube+ concept consists of multiple 16U CubeSats, After an early operation and commissioning phase, these CubeSats will perform autonomous rendezvous and docking with each other via deployable booms to establish a long fixed-baseline, and then deploy antennas for an interferometric altimeter configuration. The uniqueness of AltiCube+ is on the potential scientific opportunities brought by two left and right looking interferometric altimeters with around 6 meter baseline (total system length is more than 8 m) and the sustainability due to its significantly low cost and short development lifecycle. If budget allows, multiple AltiCube+ systems with same or different altimetry capabilities can form a constellation to dramatically reduce the revisit time and, therefore, provide much better spatiotemporal coverage. ...
Intersatellite optical communication links will be crucial for the development of future global optical and quantum communication networks. Under the harsh space environment satellite optical terminals will suffer pointing jitter and wavefront errors. In this paper, the impact of the combination of these errors on the transmitter side is modeled. Combining the far-field diffraction patterns obtained through computational Fourier optics and the statistics of the pointing jitter, the received power statistics are derived numerically for different scenarios. The computational model is first used to evaluate the optimum nominal parameters of the transmitted beam. Then, several optical aberrations are added to the transmitted beam and their impact on the communication performance is evaluated through the average bit error rate. ...
Conference paper (2024) - J.J.D. Loicq, Denis Defrère, Romain Laugier, R. Saathof, J. Bouwmeester, P. Piron, S.J.M. Dr Potin, Colin Dandumont, Vincent Moreau, More authors...
One of the most ambitious goals of modern astronomy is to uncover signs of extraterrestrial biological activity, primarily achieved through spectroscopic analysis of light emitted by exoplanets to identify specific atmospheric molecules. Most exoplanets are indirectly identified through techniques like transit or Doppler shift of the host star's flux. Long-term surveys have yielded statistical insights into the occurrence rates of different planet types based on factors such as radius/mass, orbital period, and the spectral type of the host star. Initial estimates of terrestrial planets within the habitable zone have also emerged. However, the difficulty of detecting light from these exoplanets leaves much unknown about their nature, formation, and evolution. As the number of rocky exoplanets around nearby stars rises, questions about their atmospheric composition, evolutionary trajectory, and habitability increase. Direct measurement of an exoplanet's atmospheric composition through its spectral signature in the infrared can provide answers. Measuring the infrared spectrum of these planets poses significant challenges due to the star/planet contrast and very small angular separation from their host stars. Previous research showed that space-based telescopes are mandatory, and unless large primary mirrors (>30m in diameter) can be sent into space, interferometric techniques become essential. Combining light from distant telescopes with interferometric techniques allows access to information at minimal angular separation, operating within the diffraction limit of individual telescopes. Successful demonstrations of on-ground nulling interferometry open a new era for such space-based missions. They are vital to sidestep and tackle these scientific questions. We recently initiated a new study with the European Space Agency to explore the design parameters and the performances related to an interferometric concept based on a single spacecraft and sparse multiple sub-apertures. Launch constraints are linked to the use of an Ariane 6 launch vehicle. Our parametric study covers a range of 1-4 m for the diameter of the telescope and a 10-60 m baseline. The most promising concept working in the infrared range (3-20μm) will be highlighted. This study is conducted by TUDelft in cooperation with KULeuven, CSL/ULiège, and Amos with the support of the European Space Agency. ...
Conference paper (2024) - J. Vanhamel , J. Bouwmeester
The distribution and behavior of the vast accumulation of plastic waste in the oceans, often referred to as the 'plastic soup’, are heavily influenced by plastic debris coming from rivers and coastal areas. Currently, the location and dynamics of the oceanic ‘plastic soup’ is already well understood. However, the exact process behind the formation of this plastic soup remains incompletely comprehended. This knowledge gap can be linked, in part, to the absence of worldwide detailed spatiotemporal data collected from ground and space. This is specifically due to the lack of detection and imaging techniques with a high spatial and temporal resolution. To address this gap, an innovative concept is proposed based on
imaging spectroscopy. The goal is to address and further improve the observed spectral signatures of different plastics by imaging the observed scenery. In order to distinguish between these different kinds of plastics, a dedicated optical filtering system with a high resolution and revisit time has to be designed. Therefore, the concept is based on an Acousto-Optic Tunable Filter (AOTF), specifically designed for remote sensing and imaging. In order to achieve a high temporal resolution, being able to capture the evolution and movement of plastic in the oceans, a constellation of satellites are foreseen. Therefore, a low flying platform and deployable optics are introduced. Flying at 300 km altitude instead of a typical > 600 km for Earth observation satellites, reduces the required imaging aperture. ...
This chapter provides an overview of the command and data handling system (CDHS) in small satellites and CubeSats. The chapter presents first analysis of radiation effects, specifically targeted at this subsystem, to justify components and architecture choices. Improvements in radiation testing strategies are also presented, specifically for small satellites. State-of-the-art components are then presented, providing an overview of the current market and the most common architectures. An overview of past and current missions is also presented, providing a clear mapping of the presented state-of-the-art components and architectures to guide future designs. High-level design considerations are also presented to help the reader follow some of the current trends in the sector. This chapter, overall, aims at presenting the most common approaches for the CDHS system and comparing this with traditional satellites, showing where the main differences lay with component selection and testing strategies being the fundamental points driving the architecture choices. ...
Growing interest in free-space optical communication, due to the high bandwidth and security provided by these links, has generated the necessity of designing high-performance satellite terminals. In order to develop these terminals, the opto-thermo-mechanical phenomena that appear in the space environment and their effect on optical communication links have to be understood in detail. A review of the opto-thermo-mechanical phenomena occurring in spaceborne terminals is presented, describing the relevance of each of them. The methods found to compute the impact on the communication performance due to opto-thermo-mechanical phenomena are collected by building the bridge between the optical and communication performance parameters. Finally, techniques available to mitigate the detrimental effects of these phenomena are classified, and the relevant research challenges are identified. ...
Conference paper (2023) - J. Bouwmeester, J.M. Kuiper
This paper shows the roadmap of the development of a deployable space telescope at Delft University of Technology and explores its applications, key innovations and the design of a small demonstrator. Deployable space telescopes allow for smaller stowed dimensions during launch and it is expected that increasing demand for Earth observation at a high temporal resolution enables large constellations for which the reduction in launch cost per telescope will eventually break even with the required investment. The long term development of deployable space telescopes at TU Delft foresees a primary mirror of up to 1.5 m and the measurements in the visual spectrum, the thermal infrared spectrum and specific spectral lines for trace gasses. The near term objective is to develop a small demonstrator performing wide-band monitoring in the thermal infrared spectrum. This demonstrator comprises of a fixed 30 cm primary mirror and a deployed secondary mirror and baffle. The stowed instrument has roughly half the volume of its deployed configuration. Currently, critical technologies are being designed and proto-typed. The M2 is deployed and suspended by three carbon-fiber booms with custom-designed hinges and actuators at its root. Different configurations have been tested on their correct and accurate deployment. ...
Journal article (2022) - J. Bouwmeester, A. Menicucci, E.K.A. Gill
The objective of this paper is to investigate which approach would lead to more reliable CubeSats: full subsystem redundancy or improved testing. Based on data from surveys, the reliability of satellites and subsystems is estimated using a Kaplan–Meier estimator. Subsequently, a variety of reliability models is defined and their maximum likelihood estimates are compared. A product of a Lognormal distribution addressing immaturity failure and a Gompertz distribution addressing wear-out is found to best represent CubeSat reliability. Bayesian inference is used to find realistic wear-out parameters by using failure data of small satellites. Subsystem reliability estimates are subsequently found using a similar approach. A reliability model for CubeSats with redundant subsystems is established, verified and applied in a Monte Carlo simulation. The results are compared with a model for reduced immaturity failure. Allocating resources to reduction of immaturity failures through improved testing is considered to be superior to allocating these resources to the implementation of subsystem redundancy. ...

Towards a Lean and Reliable Implementation of Subsystems and Their Interfaces

Doctoral thesis (2021) - J. Bouwmeester
This thesis provides an innovative architecture for CubeSats and PocketQubes to improve their performance and reliability. CubeSats and PocketQubes are standard satellite form factors composed of one or more cubic units of 10 cm and 5 cm respectively. It is found that the current modular subsystem approach and the electrical interfaces are not optimal in terms of performance and use of technical resources. Reliability is also a concern for CubeSats. Only 35% are able to achieve full mission success. Available literature provides no comprehensive studies on these matters and there is thus a gap in knowledge to be filled. The objective of this study is to identify and quantify the performance and reliability issues related to the physical arrangement of subsystems and the electrical interfaces and to develop an innovative bus architecture which is reliable, flexible and allows for increased performance. The overarching research question is: ”Which satellite bus architecture provides a reliable solution to the needs and constraints of a CubeSat and a PocketQube mission?” ...
Journal article (2020) - J. Bouwmeester, S. Radu, M. S. Uludag, N. Chronas, S. Speretta, A. Menicucci, E. K.A. Gill
PocketQubes are a form factor of highly miniaturized satellites with a body of one or more cubic units of 5 cm. In this paper, the characteristics of PocketQubes in terms of their constraints and their (potential) utility are treated. To avoid space debris and limit collision risk, the orbits of PocketQubes need to be constraint. An analysis of orbital decay characteristics has been carried out which, considering existing space regulations and a pro-active attitude, PocketQubes should preferably be launched in low Earth orbits below 400 km altitude. Due to technical constraints, such as form factor, power and attitude control, the domain of applications for single PocketQube missions is limited. Still, they can act as low-cost training and technology demonstration platforms. To make PocketQubes an attractive platform for other types of missions, not only the launch cost, but also the development, production and operations cost should be significantly lower than CubeSats. When the PocketQube platform matures and produced in high numbers, networks of PocketQubes can enable new applications. Applications considered feasible are in the field of (but not limited to) continuous surveillance using optical instruments, gravity field monitoring using precise orbit determination, in-situ measurements of the space environment, low data rate or bandwidth communication services and inexpensive probes around other celestial bodies. ...