Model Predictive Control (MPC) has recently gained increasing interest in the adaptive management of water resources systems due to its capability of incorporating disturbance forecasts into real-time optimal control problems. Yet, related literature is scattered with heterogeneous applications, case-specific problem settings, and results that are hardly generalized and transferable across systems. Here, we systematically review 149 peer-reviewed journal articles published over the last 25 years on MPC applied to water reservoirs, open channels, and urban water networks to identify common trends and open challenges in research and practice. The three water systems we consider are inter-connected, multi-purpose and multi-scale dynamical systems affected by multiple hydro-climatic uncertainties and evolving socioeconomic factors. Our review first identifies four main challenges currently limiting most MPC applications in the water domain: (i) lack of systematic benchmarking of MPC with respect to other control methods; (ii) lack of assessment of the impact of uncertainties on the model-based control; (iii) limited analysis of the impact of diverse forecast types, resolutions, and prediction horizons; (iv) under-consideration of the multi-objective nature of most water resources systems. We then argue that future MPC applications in water resources systems should focus on addressing these four challenges as key priorities for future developments.

Inertial measurement units are commonly used in a growing number of application fields to track or capture motions of kinematic chains, such as human limbs, exoskeletons or robotic actuators. A major challenge is the presence of magnetic disturbances that results in unreliable magnetometer readings. Recent research revealed that this problem can be overcome by exploitation of kinematic constraints. While typically each segment of the kinematic chain is equipped with an IMU, a novel approach called sparse inertial motion tracking aims at inferring the complete motion states from measurements of a reduced set of sensors. In the present contribution, we combine the magnetometer-free and the sparse approach for real-time motion tracking of double-hinge joint systems with non-parallel joint axes. Analyzing the observability of the system, we find a condition which assures that the relative orientations between all segments are uniquely determined by a kinematic constraint, which contains only the gyroscope readings. Furthermore, we propose a moving-horizon estimator and validate it in a simulation study of four movements, which differ by their degrees of excitation. The results of this study confirm the theoretical conjectures and demonstrate that magnetometer-free sparse inertial real-time motion tracking is feasible under precise and simple excitation conditions.