RFID (Radio Frequency Identification) is commonly used to monitor goods along the supply chain. The feasibility of the application of a RFID tag to monitor CFRP components was demonstrated in a previous work by some of the authors. This work is aimed at evaluating how the integration of a RFID tag inside a CFRP laminate affects the quasi-static strength and the failure mode. Finite element modelling is used to design a specimen with an embedded tag, that may be representative of the tensile state of stress in a larger laminate. Tensile testing is performed both up to failure and by interrupting tests at different load levels in order to inspect the specimen by C-scan. Acoustic Emission (AE) and Digital Image Correlation (DIC) are used as additional non-destructive monitoring techniques. Some interrupted tests were selected to extract micrographic sections that illustrate damage development in the laminate. The extensive destructive and non-destructive characterization allowed to quantify the effect of embedding a RFID tag in the laminate in terms of strength decrease and failure mode.

@en

Here we investigate the adhesive properties of Selective Laser Melted (SLM) titanium surfaces in metal-composite cobonded joints without any prior surface treatment, to explore the inherent surface roughness of SLM parts to potentially create strong adhesive bonds. Double Cantilever Beam (DCB) tests were carried out to assess the joints mode I fracture toughness involving untreated SLM titanium and woven Carbon Fibre Reinforced Polymer (CFRP) adherends, co-bonded with an epoxy film adhesive. The same type of DCB joints, but now with sandblasted SLM titanium adherends, were tested to compare the adhesion strength of the untreated SLM surface versus the sandblasted surface. The findings reveal that joints with untreated SLM titanium adherends exhibit similar toughness to those with sandblasted SLM titanium adherends, indicating that the surface morphology of as-printed SLM titanium is suitable for manufacturing robust adhesive joints. The elimination of the surface treatment in the manufacturing of adhesive joints with SLM adherends could increase the interest of many industrial fields towards the use of adhesive bonding over other joining techniques.@en