Neutron diffraction, X-ray absorption spectroscopy (XAS), and Raman spectroscopy measurements of the quaternary perovskite phase Ba₂NaMoO_5.5 have been performed in this work. The cubic crystal structure in space group Fm3¯ m has been refined using the Rietveld method. X-ray absorption near-edge structure spectroscopy (XANES) measurements at the Mo K-edge have confirmed the hexavalent state of molybdenum. The local structure of the molybdenum octahedra has been studied in detail using extended X-ray absorption fine structure (EXAFS) spectroscopy. The Mo-O and Mo-Ba distances have been compared to the neutron diffraction data with good agreement. The coefficient of thermal expansion measured in the temperature range of 303-923 K, using high temperature X-ray diffraction (HT-XRD) (α_V = 55.8 × 10^-6 K), has been determined to be ∼2 times higher than that of the barium molybdates BaMoO₃ and BaMoO₄. Moreover, no phase transition nor melting have been observed, neither by HT-XRD nor Raman spectroscopy nor differential scanning calorimetry, up to 1473 K. Furthermore, the standard enthalpy of formation (Δ_fH_m°) for Ba₂NaMoO_5.5(cr) has been determined to be -(2524.75 ± 4.15) kJ mol^-1 at 298.15 K, using solution calorimetry. Finally, the margin for safe operation of sodium-cooled fast reactors (SFRs) has been assessed by calculating the threshold oxygen potential needed, in liquid sodium, to form the quaternary compound, following an interaction between irradiated mixed oxide (U,Pu)O₂ fuel and sodium coolant.

The Thermodynamics of Advanced Fuels – International Database (TAF-ID) was developed using the Calphad method to provide a computational tool to perform thermodynamic calculations on nuclear fuel materials under normal and off-normal conditions. Different kinds of fuels are considered: oxide, metallic, carbide and nitride fuels. Many fission products are introduced as well as structural materials (e.g., zirconium, steel, concrete, SiC) and absorbers (e.g., B₄C), in order to investigate the thermochemistry of irradiated fuels and to predict their chemical interaction with the surrounding materials. The approach to develop the database and the models implemented in the database are described. Examples of models for key chemical systems are presented. Finally, a few examples of application calculations on severe accidents with UO₂ fuels, irradiated fuel chemistry of MOX and metallic fuels and metallic fuel/cladding interaction show how this tool can be used. To validate the database, the calculations are compared to the available experimental data. A good agreement is obtained which gives confidence in the maturity degree and quality of the TAF-ID database. The working version is only accessible to the participants of the TAF-ID project (Canada, France, Japan, the Netherlands, Republic of Korea, United Kingdom, USA). A public version is accessible by all the NEA countries. The current version contains models on the Am–Fe, Am–Np, Am-O-Pu, Am–U, Am–Zr, C–O–U-Pu, Cr–U, Np–U, Np–Zr, O–U–Zr, Re–U, Ru–U, Si–U, Ti–U, U-Pu-Zr, U–W systems. It is progressively extended with our published assessments. Information on how to join the project is available on the website: https://www.oecd-nea.org/science/taf-id/.