ST

S. Tokgoz

info

Please Note

5 records found

This study investigates the influence of multiple jet parameters on the flow field of translating impinging inclined water jets. We conducted full-scale stereoscopic particle image velocimetry and pressure measurements and three-dimensional computational fluid dynamics simulations for Reynolds numbers in the range of. Considering the complex mechanism of a translating impinging jet, a good concordance is observed between the experimental and numerical results. The translation-to-jet velocity ratio is identified as a critical parameter in determining whether the jet flow predominantly exhibits impinging characteristics or behaves as a jet in cross-flow. It is found that, for, jet impingement is minimal. The stand-off distance to nozzle diameter ratio determines the relative influence of the cross-flow on the jet flow. The effect of is similar to a stationary impinging jet, with the potential core extending up to, but entrainment is enhanced by the relative cross-flow. For an inclined jet, i.e. jet angle, the direction of the jet, either backward or forward, governs the deflection of the flow. Higher pressures are recorded for a backward directed jet compared with a forward directed jet for supplementary angles. ...
Journal article (2024) - Yasin Kaan İlter, Uğur Oral Ünal, Weichao Shi, Sedat Tokgöz, Mehmet Atlar
Dimpled surfaces have gained increasing attention in recent years for their potential to reduce turbulent skin friction, a capability previously acknowledged for its beneficial implications on heat transfer. As a passive drag reduction method, dimpled surfaces offer significant advantages for marine applications due to their effectiveness and practical applicability. However, despite numerous studies, conflicting opinions and inconsistent drag reduction rates persist in the literature. This paper addresses these ambiguities and offers valuable insights into the effectiveness of dimpled surfaces for drag reduction in fully turbulent flows. We conducted an extensive experimental investigation involving various dimple configurations, including different depth-to-diameter ratios, diameters and orientations, utilising a specialised Fully Turbulent Flow Channel facility and a Particle Image Velocimetry system. Our findings demonstrated that circular dimple geometries, particularly those with low depth ratios, can achieve significant drag reduction of up to 27% as the Reynolds number increases. These results highlight the substantial potential of dimpled surfaces for improving energy efficiency in marine applications, where skin friction accounts for a significant portion of the total drag experienced by large vessels. ...
Journal article (2023) - Anıl GÜLŞAN Mehmet, Sedat Tokgoz, ONBAŞIOĞLU Seyhan
In real life, sublimation of ice under certain conditions results in non-uniform formation of ice cubes with irregular shapes. During extracting these irregularly shaped cubes from enclosed spaces, the openings through which the cubes move can be plugged. A deep analysis of the sublimation process should be applied to make the shape of the ice cubes homogeneous and smooth-edged. Although there is an analytical method for the sublimation of spherical ice in literature, the hemispherical shape has not been studied. Furthermore, if ice formation and sublimation occur simultaneously within a place confined by a wall, novel approaches are necessary. In the current study, an analytical method has been proposed for the sublimation from a hemispherical ice sample as a combination of the models for the spherical and circular flat surfaces. The sublimation rate calculated by this new analytical method has been compared to the results from the weighing experiments and visualizations where the sublimation over time was measured by processing a series of images of ice cubes. There is a good agreement between the calculated values and the mass loss observed in the visualized images and the weighted samples. Thus, it is concluded that the sublimation rate is correlated with the velocity, temperature, and relative humidity of the air flowing over the ice cubes undergoing sublimation. ...
Journal article (2022) - Ferit Yildiz, Sedat Tokgoz
In this study, we aim to investigate the low noise flights of owls in terms of aerodynamics. The flow around cross-section of an owl wing, which is known for its nearly silent flight, is numerically analyzed using Computational Fluid Dynamics (CFD). The analysis are based on the parameters of angle of attack and the flight speed. The aerodynamic effects on the acoustic is compared in terms of vorticity and sound pressure level, where the frequency interval for the acoustic data is set to 0-7500Hz. It was seen that the vortical organisations around the airfoils are closely related to the acoustic results. The results show that the increase in both velocity and angle of attack affect the vorticity, thus lead to a rise in sound pressure level. It can be stated that the owl airfoil shape ensures a relatively silent flight. ...
Friction measurements were performed in a Taylor-Couette setup. Drag reduction was obtained with a riblet surface and indicated a drag reduction for a wide range of shear Reynolds numbers, with a maximum of 5.3% at Res = 4.7 × 104 (s+ = 14). Tomographic PIV verified that the friction coefficients are strongly related to the flow regimes and structures. The bulk fluid rotation was changed by the application of the riblets, as the wall-bounded flow conditions at the inner cylinder wall were changed due to the surface modification and is called the rotation effect. A simple model was used to indicate the averaged bulk velocity shift (1.4%), after which the drag changes due to the rotation effect (-1.9%) and the riblet effect (-3.4%) were determined. The bulk velocity shift of 1.4% was verified by PIV measurements. Compliant surfaces will be further investigated to check their required conditions for drag reduction of wall-bounded flows. ...