Valuable and rare materials in seawater brine are often discarded during desalination. However, there is an increasing focus on recovering these resources, due to the economic and environmental opportunities it can bring. Despite this shift, current Sustainability Assessments (SA) in desalination overlook the brine handling and social dimensions, and brine treatment assessments remain centered on techno-economic dimensions. This work proposes a comprehensive framework for the SA of integrated desalination and resource recovery options, focusing on recovering valuable materials from brine. The framework not only evaluates pre-defined systems but supports the identification of system features of interest, such as products to assess and technologies to include, as well as the transparent selection of indicators, considering specific contexts. To develop this framework, a review of the literature on SA in desalination and brine treatment systems was conducted. Looking at the identified gaps, we synthesized the findings and key messages and proposed the integration of Multi-Criteria Analysis and Value-Sensitive Design in the decision-making process. This allows stakeholders to be involved and incorporates their values at different stages of the assessment, making it distinct from traditional SA methods. This framework offers structured guidance to stakeholders on how to carry out qualitative and quantitative assessments while ensuring transparency in the assessment process.@en

The availability of water is still one of the most important factors affecting the sustainable growth of a country. Although many countries have free access to an inexhaustible source of water, the sea, this source cannot be used for human purposes as it is. To face this problem, desalination has been proposed for freshwater production but the generation of a waste brine effluent poses some issues of actual sustainability. In this work, the operation results of a Multiple Effect Distillation (MED) demo plant, designed for stable operation at high brine concentrations and operated as a brine concentrator, are presented. To this purpose, the integration with NanoFiltration (NF) has been implemented to minimize scaling risks, by removing bivalent ions from the feed stream. The 2-effects MED pilot unit, with a capacity of 1.7 m³/h, has been installed as part of the treatment chain of the WATER-MINING project, within the premises of the power station of the island of Lampedusa (Sicily, Italy) and is fully powered by waste heat at 70–80 °C from diesel engines. A vapor temperature of 40–50 °C allowed a perfect coupling with the low temperature waste heat source, demonstrating the possibility to produce distilled water with a conductivity between 15 and 25 μs/cm. Among the several operating conditions investigated, a recovery ratio above 80 % has been achieved and an effluent brine conductivity of 240 mS/cm was produced, very close to saturation in NaCl, thus being excellent for food-grade sea salt production in evaporative ponds. For the first time, it has been demonstrated on a pilot scale how a MED unit, supplied with waste heat, can be used efficiently as a brine concentrator, obtaining a brine concentration 8 times higher than the input concentration without any scaling problem.

@en

A new species of the amphipod genus Pontocrates (Boeck 1871), family Oedicerotidae, is described from Cyprus in the south-eastern Mediterranean Sea. It is a sister taxon to Pontocrates moorei (Myers & Ashelby 2022), currently recorded solely from the British Isles. It is the third species of Pontocrates now known to occur in the Mediterranean Sea.

@en

Industrial wastewater often has high levels of salt, either due to seawater or e.g. sodium chloride (NaCl) usage in the processing. Previous work indicated that aerobic granular sludge (AGS) is differently affected by seawater or saline water at similar osmotic strength. Here we investigate in more detail the impact of NaCl concentrations and seawater on the granulation and conversion processes for AGS wastewater treatment. Glycerol was used as the carbon source since it is regularly present in industrial wastewaters, and to allow the evaluation of microbial interactions that better reflect real conditions. Long-term experiments were performed to evaluate and compare the effect of salinity on granulation, anaerobic conversions, phosphate removal, and the microbial community. Smooth and stable granules as well as enhanced biological phosphorus removal (EBPR) were achieved up to 20 g/L NaCl or when using seawater. However, at NaCl levels comparable to seawater strength (30 g/L) incomplete anaerobic glycerol uptake and aerobic phosphate uptake were observed, the effluent turbidity increased, and filamentous granules began to appear. The latter is likely due to the direct aerobic growth on the leftover substrate after the anaerobic feeding period. In all reactor conditions, except the reactor with 30 g/L NaCl, Ca. Accumulibacter was the dominant microorganism. In the reactor with 30 g/L NaCl, the relative abundance of Ca. Accumulibacter decreased to ≤1 % and an increase in the genus Zoogloea was observed. Throughout all reactor conditions, Tessaracoccus and Micropruina, both actinobacteria, were present which were likely responsible for the anaerobic conversion of glycerol into volatile fatty acids. None of the glycerol metabolizing proteins were detected in Ca. Accumulibacter which supports previous findings that glycerol can not be directly utilized by Ca. Accumulibacter. The proteome profile of the dominant taxa was analysed and the results are further discussed. The exposure of salt-adapted biomass to hypo-osmotic conditions led to significant trehalose and PO₄³⁻-P release which can be related to the osmoregulation of the cells. Overall, this study provides insights into the effect of salt on the operation and stability of the EBPR and AGS processes. The findings suggest that maintaining a balanced cation ratio is likely to be more important for the operational stability of EBPR and AGS systems than absolute salt concentrations.

@en

Water scarcity in arid regions has driven the spread of desalination. These systems contribute to water access but come at an intensive energy cost, and lead to brine discharge and associated environmental impacts. This work aims to investigate emerging societal issues and tensions when developing and implementing a thermal desalination system to produce irrigation water in the South of Spain. This has been done in a demonstration system for solar desalination able to recover water and salts from desalination brine. For this purpose, a context-sensitive design exercise has been implemented. First, tensions between social values expressed by diverse stakeholders have been identified. Then, a set of technical scenarios for the full-scale implementation of the system were designed and evaluated, comparing them to conventional membrane desalination. The analysis indicates high economic and energy costs to avoid the environmental impacts of increasing water production.

@en

Minimum Liquid Discharge (MLD) and Zero Liquid Discharge (ZLD) schemes have been widely proposed in the recent scientific literature not only as a possible solution to brine disposal but also as a non-conventional sustainable source of raw materials. Nevertheless, very few works have pushed the idea towards a real demonstration activity, and this somehow limits the reliability that such schemes have with respect to the real implementation potential at the industrial scale. In this work, for the first time in the literature, an integrated treatment chain for the sustainable production of freshwater and minerals has been demonstrated at a pre-industrial scale, in the island of Lampedusa (Italy). The treatment chain included a Nanofiltration (NF) step to separate monovalent and bivalent ions, followed by a Multi-Effect Distillation (MED) unit, powered by waste heat from a Thermal Power plant, generating high-quality water (<30 μS/cm) and an ultra-concentrated brine. The latter was treated in Evaporation Ponds (EPs) to generate high purity NaCl (>99 %). On the other side, the NF retentate was treated to selectively recover magnesium and calcium hydroxides (Mg(OH)₂ purity up to 98 %) in a novel Multiple Feed-Plug Flow Reactor (MF-PFR). The resulting brine fed an ElectroDialysis with Bipolar Membranes unit (EDBM), generating in-situ alkaline and acidic solutions: chemicals needed for internal usage in the plant. All units were successfully tested, reaching satisfactory performance indicators. Furthermore, the stability of each unit during the daily operational run was assessed and successfully achieved, demonstrating not only the technical feasibility of the proposed demo plant, but also the feasibility of MLD as a sustainable alternative for minerals recovery.

@en

This work proposes an innovative integration of Membrane Distillation (MD) and photo-oxidation for a continuous recovery of water from arsenic (As) contaminated solutions coupled with the oxidation of arsenite (As(III)) into arsenate (As(V)). Polyvinylidene fluoride (PVDF) mixed matrix membranes (MMMs) containing titanium dioxide nanoparticles (TiO₂ NPs) as photocatalyst were developed. A systematic study elucidated the effect of TiO₂ NPs on membranes’ morphology prepared via non-solvent-induced phase separation (NIPS) using triethyl phosphate (TEP) as a green solvent for PVDF solubilization. Vacuum membrane distillation (VMD) tests carried out by irradiating the MMMs with ultraviolet (UV) radiation demonstrated the possibility of recovering up to 80 % of the water from As-contaminated synthetic and real multi-ions aqueous solutions from Sila Massif (Italy). The distillate was recovered at a rate of 6.9–7.2 kg·m⁻²·h⁻¹ (feed inlet temperature of 60 °C), while the presence of 7 wt% of TiO₂ in PVDF membranes enabled the photo-oxidation of 95 % of the As(III) to As(V) at a first order kinetic constant of 0.0106 min⁻¹. After 5 cycles of As-remediation experiments, post-hoc mechanical testing on the membrane suggested the emergence of polymer embrittlement induced by UV radiation (total irradiation time of 7.5 h), highlighting the urgent need for developing photocatalytic membranes with long-term stability. Overall, this study elucidates at laboratory scale the performance of a coupled and continuous Membrane Distillation (MD) and photo-oxidation system for arsenic (As) remediation, employing microporous hydrophobic green membranes doped with a photocatalyst.

@en

Water and energy are two strategic drivers of sustainable development, intimately interlaced and vital for a secure future of humanity. Given that water resources are limited, whereas global population and energy demand are exponentially growing, the competitive balance between these resources, referred to as the water-energy nexus, is receiving renewed focus. The desalination industry alleviates water stress by producing freshwater from saline sources, such as seawater, brackish or groundwater. Since the last decade, the market has been dominated by membrane desalination technology, offering significant advantages over thermal processes, such as lower energy demand, easy process control and scale-up, modularity for flexible productivity, and feasibility of synergic integration of different membrane operations. Although seawater reverse osmosis (SWRO) accounts for more than 70% of the global desalination capacity, it is circumscribed by some significant technological limitations, such as: (i) the relatively low water recovery factor (around 50%) due to the negative impact of osmotic and polarization phenomena; (ii) an energy consumption in the range of 3–5 kWh m−3, still far from the theoretical energy demand (1.1 kWh m−3) to produce potable water from seawater (at 50% water recovery factor). Ultimately, desalination is an energy intensive practice and research efforts are oriented toward the development of alternative and more energy-efficient approaches in order to enhance freshwater resources without placing excessive strain on limited energy supplies. Recent years have seen a relevant surge of interest in membrane distillation (MD), a thermally driven membrane desalination technology having the potential to complement SWRO in the logic of Process Intensification and Zero Liquid Discharge paradigm. Due to its peculiar transport mechanism and negligibility of osmotic phenomena, MD allows high-quality distillate production (theoretically, non-volatile species are completely rejected) with a recovery factor of up to 80% at a relatively low operative temperature (typically 60 °C–80 °C). Although low operative temperatures make MD technology attractive for renewable power applications (e.g. solar thermal, wind or geothermal energy sources) or for efficient exploitation of low-grade or waste heat streams, the low energy efficiency intrinsically due to heat losses—and specifically to temperature polarization—has so far hindered the application at industrial scale. Nowadays, photothermal materials able to absorb and convert natural or artificial irradiation into heat have gained great attention, demonstrating the potential to mitigate the 'anthropic' energy input to MD and to mitigate the impact of thermal inefficiencies. On this road, a step-change improvement in light-to-heat conversion is expected through high-throughput computational screening over thermoplasmonic materials based on electronic and optical properties of advanced materials including novel topological phases of matter used as nanofillers in polymeric membranes. Coherently with the concept of Circular Economy, waste hypersaline solutions rejected from desalination process (referred as 'brine') are now the subject of valorization activities along two main exploitation routes: (1) recovery of valuable minor and trace metals and minerals, with special focus on critical raw materials (including, among others, Mg, Na, Ca, K, Sr, Li, Br, B, and Rb); (2) production of salinity gradient power (SGP) renewable energy resulting from the recovery of the Gibbs energy of mixing (mainly represented by the entropic contribution) of two solutions having different ionic concentration. The exciting new frontier of sustainable mining of seawater concentrates is accelerating the appearance of a plethora of innovative membrane materials and methods for brine dehydration and selective extraction of trace ions, although under the sword of Damocles represented by cost feasibility for reliable commercial application. On the other hand, among several emerging technologies, reverse electrodialysis (SGP-RED) was already proven capable—at least at the kW scale–of turning the chemical potential difference between river water, brackish water, and seawater into electrical energy. Efforts to develop a next generation of ion exchange membranes exhibiting high perm-selectivity (especially toward monovalent ions) and low electrical resistance, to improve system engineering and to optimize operational conditions, pursue the goal of enhancing the low power density so far achievable (in the order of a few W per m2). This Roadmap takes the form of a series of short contributions written independently by worldwide experts in the topic. Collectively, such contributions provide a comprehensive picture of the current state of the art in membrane science and technology at the water-energy nexus, and how it is expected to develop in the future. In addition, this Roadmap acknowledges the challenges and advances in membrane systems, particularly emphasizing the interplay of material innovation and system optimization, which collectively contribute to advancing the desalination field within the water-energy nexus framework.@en

Circular economy has become a popular subject, attracting attention from academics, practitioners, and policy-makers alike. However, despite the excitement surrounding it, the concept of circular economy has been criticized for being vague and having multiple interpretations from different fields. As a result, there is a lack of evidence and guidance for practitioners, making it difficult to put into practice. Our goal is to fill this gap by bridging the design and implementation of circular economy solutions in the water sector. Through an exploratory study of two case studies, we have shown the significance of what we call as “circular water value” in the context of coal mining. This value is strongly influenced by the chemistry, concentration levels and purity of these effluents. We compared the circular value of the two cases (ranging from 2.5 to 6 euros per cubic meter) to the cost of the novel treatment system, developed by the authors through the EU-funded project ZERO BRINE, to capture this value. This allowed us to evaluate the potential for circular economy implementation. We suggest that this circular transition can offer significant opportunities to coal mining regions in enabling a just transition implementation. This is a topic that is increasingly gaining interest among academic and practitioner communities, further triggered by the recently adopted Just Transition Mechanism. This mechanism secures targeted support of 55 billion euro for the period 2021–2027 for the most affected regions within Europe. The concept of “circular water value” introduced in this article can serve as a tool for exploring the creation of emerging circular value chains from coal mines, as well as for other wastewater treatment and resource recovery projects in general.

@en

The sustainable supply of water is crucial, especially on islands where water is scarce. Our study applied the social life cycle assessment (S-LCA), under the organizational approach, to assess industrial water production on the island of Lampedusa, Italy. A novel plant for industrial water production considering a circular concept was compared with the existing linear production plant based on reverse osmosis. An online survey, brief literature review and generic analysis were conducted to prioritize impact subcategories selection for site-specific analysis that regarded six organizations in the system boundaries. These subcategories were Local employment, Access to material resources, Promoting social responsibility, End-of-life responsibility, Health and safety (Workers), and Public commitment to sustainability issues. The social performance of organizations involved was assessed based on equal weighting and weighting with cost values. The generic analysis showed that wastewater treatment in Italy is underdeveloped, and water scarcity can become a serious problem in the future. The site-specific analysis based on equal weighting showed that the novel water plant results in improving social performance for all considered impact subcategories by 88 % to 91 % due to co-production when compared with the existing plant. Even increasing impacts allocation to industrial water production social benefits are still expected due to co-production. The type of weighting based on cost values showed that two organizations are the main contributors to the social performance of the novel system, and improving their corporate conduct can result in improving impacts up to 25 %, such as Public commitment to sustainability issues. To conclude, the novel plan does provide social benefits but mainly due to co-production, thus, it should be investigated more how to apply the S-LCA to linear production systems as they become more circular.

@en

This work explores resource recovery coupled to seawater desalination in small islands. As small islands depend on seawater desalination for water access, they make an excellent ground for exploring the trade-offs associated to resource recovery, like potential economic gains, energy use, and environmental impacts. Here, we investigated these tensions in the context of Lampedusa, in Italy. We then developed and evaluated scenarios for the recovery of additional water, Mg, and other resources from brines, to identify if and how resource recovery is an interesting approach for the island vis-à-vis these tensions. We have found that the potential to increase water production with water recovery from brine is an interesting alternative for small islands, especially when harnessing waste heat. However, while some technologies offer possibilities for recovering additional resources, in places like small islands the potential benefits from additional recovery do not seem to justify the costs to the local system.

@en

Enhanced biological phosphate removal and aerobic sludge granulation are commonly studied with fatty acids as substrate. Fermentative substrates such as glucose have received limited attention. In this work, glucose conversion by aerobic granular sludge and its impact on phosphate removal was studied. Long-term stable phosphate removal and successful granulation were achieved. Glucose was rapidly taken up (273 mg/gVSS/h) at the start of the anaerobic phase, while phosphate was released during the full anaerobic phase. Some lactate was produced during glucose consumption, which was anaerobically consumed once glucose was depleted. The phosphate release appeared to be directly proportional to the uptake of lactate. The ratio of phosphorus released to glucose carbon taken up over the full anaerobic phase was 0.25 Pmol/Cmol. Along with glucose and lactate uptake in the anaerobic phase, poly‑hydroxy-alkanoates and glycogen storage were observed. There was a linear correlation between glucose consumption and lactate formation. While lactate accounted for approximately 89 % of the observed products in the bulk liquid, minor quantities of formate (5 %), propionate (4 %), and acetate (3 %) were also detected (mass fraction). Formate was not consumed anaerobically. Quantitative fluorescence in-situ hybridization (qFISH) revealed that polyphosphate accumulating organisms (PAO) accounted for 61 ± 15 % of the total biovolume. Metagenome evaluation of the biomass indicated a high abundance of Micropruina and Ca. Accumulibacter in the system, which was in accordance with the microscopic observations and the protein mass fraction from metaproteome analysis. Anaerobic conversions were evaluated based on theoretical ATP balances to provide the substrate distribution amongst the dominant genera. This research shows that aerobic granular sludge technology can be applied to glucose-containing effluents and that glucose is a suitable substrate for achieving phosphate removal. The results also show that for fermentable substrates a microbial community consisting of fermentative organisms and PAO develop.

@en

The diversity and distribution of polychaetes in the coastal area and the EEZ of the Republic of Cyprus is presented based on both the literature records and new data acquired in a wide range of environmental monitoring programmes and research projects. A total of 585 polychaete species belonging to 49 families were reported in Cyprus waters; among them, 205 species (34%) were recorded based on the literature only, 149 (26%) were new records based on our own data, and a total of 231 spp. (40%) were recorded from both the literature and new data. A total of 51 polychaete species were identified as non-indigenous; among them, 32 were confirmed as alien species, 4 were considered cryptogenic, and 15 were considered questionable as there were doubts about their identity. The Indo-Pacific Schistomeringos loveni was reported for the first time in the Mediterranean Sea, while four species already reported in the literature, namely, Bispira melanostigma, Fimbriosthenelais longipinnis Leonnates aylaoberi, and Rhodopsis pusilla, were added to the list of non-indigenous polychaetes in the Mediterranean Sea. The current work highlights the importance of implementing environmental monitoring programmes and carrying out research surveys targeting benthic macrofauna assemblages.@en

The recovery of resources, including water reuse, has been presented as a solution to overcome scarcity, and improve the economic and environmental performance of water provision and treatment. However, its implementation faces non-technical challenges, including the need to collaborate with new stakeholders and face societal acceptance issues. Looking at the prominence of the circular economy in current policy developments and the challenges to resource recovery, exploring these issues is urgently needed. In this work, we reviewed a broad range of literature to identify societal values relevant to the recovery of water and other resources from wastewaters, particularly urban and industrial wastewater and desalination brines. We discuss tensions and uncertainties around these values, such as the tension between socio-economic expectations of resource recovery and potential long-term sustainability impacts, as well as uncertainties regarding safety and regulations. For addressing these tensions and uncertainties, we suggest aligning common methods in engineering and the natural sciences with Responsible Innovation approaches, such as Value Sensitive Design and Safe-by-Design. To complement Responsible Innovation, social learning with a Sustainability Transitions or Adaptive Governance perspective is suggested.

@en

The European Union's Environmental Technology Verification (ETV) program aims to foster innovative environmental technologies to reach the market and reassure potential users. This paper presents an investigation of using ETV for three technologies, being developed within the EU Zero Brine research and innovation project. The technologies were designed to recover high quality water, salts and minerals from brine solutions. The technologies in focus are the forward feed MED evaporator, the Multi Feed - Plug Flow Reactor Crystalliser and Eutectic Freeze Crystallization. The study sought to understand the challenges of the ETV process, the readiness and eligibility of technologies, and possible preparations within the project lifetime. Challenges identified included: understanding what sufficient market readiness is, and achieving this within the duration of a project (also linked to funding allocation for the ETV process); and developing suitable performance claims, supported with sufficient levels of test data. A simple framework is presented to aid the integration of ETV into the development process. It promotes the use of life cycle assessment to understand the environmental added value of the technology and aid the development of performance claims.

@en

Eighty percent of wastewater is left untreated or not reused, exacerbating the water quality challenge, especially in vulnerable communities. This Voices asks: how can we improve wastewater management and convert wastewater into a resource?@en

Although the energy transition results in decreased use of coal for power production, hard coal extraction will continue due to its importance in steel production and coal mine wastewater will continue generating after mines closure. The coal mining sector produces wastewater which results in environmental burdens and often contains valuable materials that can be treated to eliminate effluent discharge and recover contained materials. The aim of this study is to determine whether the implementation of a novel wastewater treatment technique in an existing coal wastewater treatment plant (WWTP) can improve both environmental performance and resource recovery potential. Our study assesses for the first time the environmental performance of the WWTP of Dębieńsko at the Upper Silesian Coal Basin, in Poland because coal mine effluents need to be treated to eliminate current environmental impacts on surface water bodies (rivers). The existing wastewater treatment system comprises reverse osmosis, evaporation and crystallization technologies. In the case of the novel ZERO BRINE technique, lab performance data is scaled-up and used for nanofiltration, reverse osmosis, electrodialysis and crystallization technologies. The environmental impacts analysis is performed with life cycle assessment (LCA) by considering mid-point impact categories (climate change, terrestrial acidification and fossil resource scarcity) and end-point damages (human health, ecosystems and resources). The functional unit is 1 m³ of coal mine wastewater input and a scenario is developed where the plant functionality concerns salt production. Results show that the implementation of the ZERO BRINE technique can improve the environmental performance of the WWTP for all considered impact categories due to a reduction in electricity consumption by 13% in the entire plant. Climate change, acidification, fossil resources scarcity, human health, ecosystems, and resources were improved by 16%, 13%, 12%, 25%, 21% and 13%, respectively. A sensitivity analysis is performed on the electricity consumption of electrodialysis which shows an additional improvement by 7% on all impacts. The ZERO BRINE technique produces both water and different types of salts. In this case, the multi-functionality of the system is addressed through substitution, while sensitivity analyses are carried out using mass and economic allocation methods.

@en

Glycerol is abundantly present in wastewater from industries such as biodiesel production facilities. Glycerol is also a potential carbon source for microbes that are involved in wastewater nutrient removal processes. The conversion of glycerol in biological phosphorus removal of aerobic granular sludge processes has not been explored to date. The current study describes glycerol utilization by aerobic granular sludge and enhanced biological phosphorus removal (EBPR). Robust granules with good phosphorus removal capabilities were formed in an aerobic granular sludge sequencing batch reactor fed with glycerol. The interaction between the fermentative conversion of glycerol and product uptake by polyphosphate accumulating organisms (PAO) was studied using stoichiometric and microbial community analysis. Metagenomic, metaproteomic and microscopic analysis identified a community dominated by Actinobacteria (Tessaracoccus and Micropruina) and a typical PAO known as Ca. Accumulibacter. Glycerol uptake facilitator (glpF) and glycerol kinase (glpK), two proteins involved in the transport of glycerol into the cellular metabolism, were only observed in the genome of the Actinobacteria. The anaerobic conversion appeared to be a combination of a substrate fermentation and product uptake-type reaction. Initially, glycerol fermentation led mainly to the production of 1,3-propanediol (1,3-PDO) which was not taken up under anaerobic conditions. Despite the aerobic conversion of 1,3-PDO stable granulation was observed. Over time, 1,3-PDO production decreased and complete anaerobic COD uptake was observed. The results demonstrate that glycerol-containing wastewater can effectively be treated by the aerobic granular sludge process and that fermentative and polyphosphate accumulating organisms can form a food chain in glycerol-based EBPR processes.@en

European policy encourages the adoption of sustainable systems that promote the efficient use and recovery of minerals and chemicals. In this respect, desalination brines do contain a dramatic amount of valuable minerals and can be valorized through appropriate treatments rather than releasing them into the environment. This paper proposes an innovative brine recovery system for obtaining high purity chemicals through the integration of Eutectic Freeze Crystallization (EFC) and Electrodialysis with Bipolar Membrane (EDBM) technologies. Two separate laboratory-scale experimental campaigns were carried out to validate the potential integration of the two processes. Mirabilite (Na₂SO₄∙10H₂O) has been recovered with a purity of 99.9% using the EFC, and a feed rich in NaCl with low impurities has been further processed in an EDBM unit. EDBM tests with feed solutions simulating EFC effluents have shown that it is possible to produce acidic and basic solutions with high purity (>99%), despite the presence of impurities in the feed. Interestingly, the low EDBM specific consumptions of 0.9–1.1 kWh kg⁻¹_NaOH at 100 A m⁻² and 1.3–1.6 kWh kg⁻¹_NaOH at 300 A m⁻² were comparable with and without impurities. In the context of the circular economy strategy promoted by the EU-H2020 Water Mining project, the current study demonstrates that this integrated system effectively minimizes waste, promoting sustainability while providing a potential economic return.

@en

Nowadays, small remote islands rely heavily on desalination technologies to overcome freshwater scarcity. Unfortunately, these technologies are accompanied by the production of brines which can affect the receiving water bodies i.e., the aquatic ecosystem. Yet, it is extremely appealing how such brines constitute an abundant source of valuable raw materials (such as magnesium). In this work, a novel hybrid system is introduced to capture the value of seawater reverse osmosis (SWRO) brines produced in the minor Sicilian island of Pantelleria. The “Minimal Liquid Discharge” (MLD) process consists of: (i) Nanofiltration NF (separation of bivalent from monovalent ions), (ii) Mg Reactive Crystallizer MRC (selective recovery of magnesium and calcium), (iii) Multi-Effect Distillation MED (freshwater production) and (iv) NaCl Thermal Crystallizer NTC (sodium chloride recovery). The economic and environmental performances of the process have been evaluated by implementing and integrating the techno-economic models of each unit in a simulation platform called RCE (Remote Component Environment). Results revealed important economic benefits in comparison to conventional brine disposal methods. In addition, the proposed MLD chain turned out to be an attractive alternative for the production of high purity minerals/salts, achieving lower selling prices than the current market price.

@en